Date: 5/8/2021 13:41
0
Enter the Backyard Brawl - 4 $1,000 First Place Winners! Enter Here *

*Contest ends Sept 15th, 2021 11:59 PM EST. Limit one entry per person. Limited free targets, while supplies last.

PY-A-507

AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail

4.0 (6 reviews)
AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail

AirForce 1" Rings,, Image 1

Consider the following similar item(s)

See other products by AirForce

Share
  • 1" rings
  • Medium profile
  • Fits 9.5 mm-13mm dovetails
  • 4 hex screws/ring to secure the scope
  • Vertical scope stop
The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.


This item is not eligible for coupon discounts


Item Code: AFU1018 [PY-A-507]

Average Customer Review

4.0 (6 reviews)
5 star
4 star
3 star
2 star
1 star
3 votes
1 vote
1 vote
1 vote

Create an online review

Customer images

Sort by Date: Newest–Oldest

4.0 4.0

5.0 5.0

Things I liked:

Good quality rings and very reasonably priced. They didn't fit my TX200 very well but were a perfect match for my 2400kt and its new UTG bug buster scope.

Things I would have changed:

They fit great on the more narrow dove tail grooves, not so on the 11 mm ones, too much gap at the clamping area. Either a more universal style or offer them in two different widths. I decided to buy BKL rings for my TX200, those fit perfect.

What others should know:

I decided to buy BKL rings for my TX200, those fit perfect.

5.0 5.0

4.0 4.0

Things I liked:

Qualtiy is good works like they should.

2.0 2.0

1.0 1.0

Things I liked:

light weight

Things I would have changed:

clamping surface, fastener quality, dovetail clamp geometry

What others should know:

These rings did not do well at all on a magnum springer with a full size scope. I've been installing scopes on hunting, benchrest, and competition rifles and pistols of all types for a couple decades, so I'm not basing this review on limited experience. I bought these rings to install a Centerpoint 3-9x40 scope on a Gamo Silent Cat. Initially the rings seemed OK, about what would be expected for the price. Installation went pretty straight forward except for the oddball weird size of the hex heads on the screws... 2.5mm was too small, 3mm too big, and none of my non-metric allen wrenches in 1/64" increments fit correctly either (neither did the wrench that came with the mounts). I substituted the RING screws with some better quality screws with 3mm hex heads, so that was no problem but I didn't have any alternatives to the base screws. I was able to get the bases on the dovetail good and tight I thought, including some blue loctite. Afraid to go super-hard on the torque because it is a small thread size screwing into aluminum... I've stripped more than a couple of similar setups in years past. Rear base with the recoil stop pin seated fine. Also installed the rings as tight as possible after cleaning and degreasing all surfaces. After the first 20 or so shots, I saw the scope creeping back in the rear ring a little bit. I retightened the rear ring screws which had loosened. The front ring screws were tight but the base was creeping on the dovetail. No, the clamp insert was not backwards. Upon bringing the gun in after shooting, I removed the rear ring, and it was obvious from the wear marks that the rings was clamping only on the sides of the ring and sides of the scope tube, not evenly (or at all...) around the circumference of the scope tube. I substituted some split "4x4" ring tops from another set of rings with similar geometry which fit better. Still getting creep though not as much, and stripped out one ring screw hole when retorquing a screw on the front base. These are going in the trash can. Might be OK for a low powered air rifle with a small scope. These don't seem to be any "better" than most $10 rings. Money down the drain until I either try some of the expensive BKL rings, or even more expensive Weaver adapter and some REAL rings.

+ Load More

Got a question or answer?
Log in to participate

    You may also like. ...see more

    Crosman Pellgun oil5.0 (392 reviews)
    Add to Cart

    In-stock

    Crosman Pellgun oil

    $4.95$3.95
    $3.95
    Crosman 12 Gram5.0 (216 reviews)
    Add to Cart

    In-stock

    Crosman 12 Gram CO2, 40 Cartridges

    $36.95$28.95
    $28.95
    UTG 30mm SWAT4.5 (189 reviews)
    Add to Cart

    In-stock

    UTG 30mm SWAT 3-12x44 AO Rifle Scope

    $172.99$154.99
    $154.99
    Benjamin & Sheridan4.5 (224 reviews)
    Pre-order

    Out of Stock

    Estimated in-stock date 08-10-21

    Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve

    $39.95$35.95
    $35.95
    Air Venturi Nomad4.5 (189 reviews)
    Pre-order

    Out of Stock

    This item is past due. Check back for updates.

    Air Venturi Nomad II 4500 PSI Portable PCP Compressor

    $849.99$799.99
    $799.99
    Crosman Airgun Ammo5.0 (147 reviews)
    Pre-order

    Out of Stock

    Estimated in-stock date 08-23-21

    Crosman Airgun Ammo Pouch, Holds 500 Pellets

    $7.99$7.29
    $7.29
    Crosman Silicone Chamber5.0 (137 reviews)
    Add to Cart

    In-stock

    Crosman Silicone Chamber Oil

    $9.95$8.95
    $8.95

    Buy with confidence

    Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

    Text JOIN to 91256 and get $10 Off Your Next $50+ Order.
    *By subscribing to Pyramyd Air, you agree to receive recurring autodialed marketing text messages to the mobile number used at opt-in. Consent is not a condition or purchase. Msg freq may vary. Msg & data rates may apply. Text HELP for help, Text STOP to 91256 to opt out. Reply with birthday MM/DD/YYYY to verify legal age of 18+ to receive texts. Terms of Use & Privacy Policy.