AirForce Sound-Loc Kit, 20/.22/.25-Cal Talon SS Upgrade, Superior Noise Reduction

Very easy to install. Lightweight parts. Does not add length to your rig like you do when you add a regular suppressor.

Check out my video on this on YouTube, search "Air Shootist" to see me install this and then compare the loudness versus stock. I don't know that there is anything else Airforce could do to improve the product. Maybe include some spare set screws?

This takes a little bit of bark out of the gun, but doesn't make it "mouse fart quiet".

Quiets down the rifles I have, (condors, escape ss). I like that one set covers .20, .22, & .25 calibers and is interchangeable in Talon SS (used as upgrade from old version), Condor, and Escape SS (although the Escape SS comes with these already).

Your description.... If you read the Q&A, there seem to be quite a few folks who think this kit can only be used on Talon SS in .20, .22, & .25. It is true that the kits are caliber specific, but they are not rifle specific. They can indeed be used on Condors and Escape SS when using 12 inch barrels. Check the Airforce website and you will see the versatility mentioned in their description.

Just what was stated above. CAN BE USED WITH .20, .22, & .25 AIRFORCE CONDOR, ESCAPE SS, AND TALON SS.

SSssssHHHHHhhhhhhhhh

nothing

Quiet is a riot

Makes my Talon SS super quiet. Seems like it cuts the noise in half.

The spacer needed a trim as it was too large. Better than too small though.

The screws holding the barrel fit one way. There are three holes in barrle spacers. Make sure they align correctly.

Was told that what I did not need could return I returned parts not needed PyramydAir returned my $ can't work any better than that.

Nothing

No

Very easy to install.

Made the air rifle much quieter. Did not affect accuracy at all. Now the rifle is much more back yard friendly.

The new collars that go on the barrel do not align with attachment holes in the rifles frame unless one is tightened fully to the barrel and one is left to float slightly back and forth on one of the barrel alignment dimples on the barrel. It makes the fitting a little tricky but that is how it worked with mine.

It's a little pricey but worth it if you want quiet shooting and no affect on accuracy.
I like the results I got from the kit and would get another if I needed one.

Fairly easy to install on Talon SS

Perhaps add some felt washers in the baffles.

This did not reduce sound very much, if at all. Will seek another option. Perhaps a Talon Tune add on.

This sound lock can be used on other applications of brands of guns. I found the machining to be great and in my case did what I needed it to do.

lower price

This was used on a Theoben MK II .25 55 FPE gun with out a full shroud. With a little work the kit can be made useful with out any machining. Great for those that do not have the tooling to make your own. FANG

Very easy to install, had it installed in 10 minutes and noticed the difference after the first shot.

Nothing, it works the way it is, as they say if its not broke don't fix it.

As this does reduce the shot report, it is a little priceeee, but I'm happy with it and would recommend this to any one with a Talon.