Date: 26/6/2022 9:37
0

PY-4188-8163

Colt SAA Peacemaker 7.5" CO2 Pellet Revolver, Nickel

4.5 (38 reviews) Review, article, latest buzz
Colt SAA Peacemaker 7.5" CO2 Pellet Revolver, Nickel

Colt SAA Peacemaker, Image 1Colt SAA Peacemaker, Image 2Colt SAA Peacemaker, Image 3Colt SAA Peacemaker, Image 4
PY-4188-8163

Not Available

click to see more from this manufacturer
  • FeatureIcon
    WARNING WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

See other products by Umarex > Colt

Share
Item details
Colt-2280084-PY [PY-4188-8163]
Colt Peacemaker SAA 7.5" CO2 Pellet Revolver, Nickel finish, Ivory grips

Sold & shipped by PyramydAir


Price

$169.99

Caliber.177 (4.5mm)
Max Velocity380 fps
StockSynthetic
GripAmbi
    Finally a 7.5" version of the Colt Peacemaker pellet revolver (Single Action Army)!
  • 12-gram CO2 cartridge
  • 6-rd cylinder
  • Fixed front sight
  • Notch rear sight
  • Synthetic wood or ivory grip panels
  • Single-action only
  • Manual safety
  • Working ejector rod
  • Nickel-plated finish
  • 2.35 lbs.
  • 7.5" outer barrel length (6.75" inner barrel)
  • 13.00" overall length
  • Includes 6 shells (each shell is loaded with one pellet)


This is the first faithful .177 caliber replica of the famous 7-1/2 inch barrel length 1873 Colt Peacemaker!

You'll marvel at the realism of this Colt Single Action Army revolver. Besides the incredible attention to detail on the gun, the box is also a nice surprise. It has a vintage look.

Unlike modern CO2 revolvers with a swing out cylinder, the Colt Peacemaker loads a bit differently, exactly like the legendary Colt Single Action Army, with each shell loaded separately through the loading gate on the right side of the frame. To load the Peacemaker, you place the hammer on half-cock, open the loading gate to expose the back of the cylinder, and manually rotate the cylinder to each chamber, loading fresh rounds or ejecting the fired shells as you go, by pushing the ejector rod. It's a real taste of the Old West, right down to the four distinct clicks as the hammer is cocked. It's a Colt Peacemaker in spirit, design, and name, and now for the first time with the original 7-1/2 inch barrel.*

*External barrel length is 7-1/2 inches measured from the front of the cylinder to the muzzle. The rifled .177 caliber barrel, recessed inside the .45 Colt barrel, is actually 6.75 inches in overall length.

See other products by Umarex > Colt

Share
Item details
Colt-2280084-PY [PY-4188-8163]
Colt Peacemaker SAA 7.5" CO2 Pellet Revolver, Nickel finish, Ivory grips

Sold & shipped by PyramydAir


Price

$169.99

Caliber.177 (4.5mm)
Max Velocity380 fps
StockSynthetic
GripAmbi

Specs

Max Velocity380 fps
Overall Length13.0"
ButtplateNone
FunctionRepeater
Weight2.35 lbs
ScopeableNo
SafetyManual
Suggested forPlinking/Fun
Caliber.177 (4.5mm)
Loudness4-Medium-High
Barrel Length6.75"
Shot Capacity6
BarrelRifled
Front SightBlade
Rear SightFixed
ActionRevolver
PowerplantCO2
Trigger ActionSingle-Action
MaterialFull metal
Body TypePistol
Fixed/adj. powerFixed
UpgradesIvory grips

Average Customer Review

4.5 (38 reviews)
5 star
4 star
3 star
2 star
1 star
31 reviews
4 reviews
1 review
2 reviews

Create an online review

Customer images

Sort by Date: Newest–Oldest

1.0 1.0

1.0 1.0

1.0 1.0

Things I liked:

The look

Things I would have changed:

Nothing If it worked

What others should know:

I could shoot my gun only once, then the trigger got stucked, and when I put the second Co2 bottle and tied it up with the tool the gas went out completely around the seal.

5.0 5.0

4.0 4.0

4.0 4.0

Things I liked:

The gun is exactly what I hoped for. The build is phenomenal, and it has weight to it, which surprised me. That definitely let me know it's the real deal. First time purchasing, and was not disappointed by the gun or the website.

Things I would have changed:

Definitely the synthetic grips. They feel and sound extremely fragile. I don't plan on dropping the gun, but if I would, i'm sure the grips would break or get scratched. Possibly looking into custom made grips. While powerful, with it being a CO2 pellet gun, the shooting accuracy is a bit off, but not too extreme. Still enjoyable.

What others should know:

Definitely a must buy for any wild west reenactment (that allows guns), personal display, or just a fun time shooting in the backyard.

3.0 3.0

4.0 4.0

2.0 2.0

Things I liked:

The look, the details, the weight, the trigger, the ratcheting sound... the entire package is a very good replica execution. Almost knocked clean out of the park... almost.

Things I would have changed:

Accuracy! Mine is way off on point of impact versus point of aim. Like half a foot at 10 meters. It shoots 2 inches to the left and as much as 4 inches high! Now, the barrel is accurate, I get 1 inch 6 shot groups at 10 meters. It is just not properly aligned to the fixed sights, a big mistake for fixed sights gun! On half cocked, the cylinder port does not line up centered for loading like it does on the real deal. Therefore it is not fully exposed, you have to revolve it just a hair more to load a casing. You over shoot it when the cylinder comes loose from it's detent to revolve, this makes loading awkward and tedious. Should have moved the loading gate portion if need be so that it lines up appropriately with the cylinder ports. Also I was very displeased the casings are not brass like I have seen on many videos! They are the same nickel finish as the gun. I found this a big miss on a simple but highly effective and super cool detail that should be capitalized o

What others should know:

Maybe pay for the 10 for $10 on this one? I'm exchanging mine for another after long debate. I do not find the huge point of impact versus point of aim to be acceptable. I have to aim WAY off target essentially guessing about where it will actually hit. I have conferred with other owners who say theirs are quite spot on. Mine is not. I am a seasoned adult shooter, the gun is the issue.

+ Load More

Got a question or answer?
Log in to participate

  • richard from USA asked:

    I heard that to fit the co2 cartridge in the grip frame they had to use a different frame than the SAA. I heard it was the 1860 army frame. Does anyone know if this is true?

    • mark from USA asked:

      does this gun come with both wood looking and ivory looking grips? i heard it did so i wanted to make sure.

      • richard from USA answered:

        I just received my colt 7-1/2 barrel ivory grip revolver and the brown grips were in the box under the cardboard

    • Wes from USA asked:

      Is the barrel rifled or smooth bore ?

      • Paul from USA answered:

        Read the specifications, it clearly states rifled.

    + Load More

    Compatible with Colt SAA Peacemaker 7.5" CO2 Pellet Revolver, Nickel

    Buy with confidence

    Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

    Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

    * By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.