WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Gamo’s TC35 gives shooters huge rounds delivered with incredible power, all set into a streamlined frame. The result? A big bore that’s ready to take on your most challenging hunts.
The TC35 is Gamo’s answer to airgunners who want big bore power and performance in a compact package. Powered by the same 480cc cylinder as the Gamo TC45, the TC35 is capable of sending .357 caliber rounds into targets at a whopping 850 fps.
Built as a compact small to medium game hunter, the TC35 utilizes a unique trigger-guard cocking mechanism that exposes the breach when you cock the gun. Load up your .357 round, and watch the highly-efficient inline valve system do its job. Weighing in at a slim 5.5lbs, carrying the TC35 is no trouble.
Each rifle comes loaded up with features to provide the ultimate airgun hunting experience. From its long tactical Weaver/Picatinny rail to its 2-stage adjustable trigger. The 35’s stock encases the carbon fiber air cylinder and is coated with a rubberized texture to provide the ideal cheek weld once you’ve mounted your optics. A grooved and textured AR style grip rests right behind the trigger and is interchangeable with other AR15 grips.
If you want big power from a smaller air rifle that can travel anywhere you can, pick up the TC35, the trail awaits.
Gamo TC35 Big Bore PCP Air Rifle
| Max Velocity | 850 fps |
| Overall Length | 35.88" |
| Buttplate | Rubber |
| Function | Single-shot |
| Weight | 6.0 lbs |
| Scopeable | Weaver/Picatinny |
| Safety | Manual |
| Suggested for | Hunting |
| Caliber | .357 (9mm) |
| Muzzle Energy | 107 ft/lbsMeasured with 67 ammo |
| Loudness | 4-Medium-High |
| Barrel Length | 14.96" |
| Shot Capacity | 1 |
| Barrel | Rifled |
| Front Sight | none |
| Rear Sight | none |
| Trigger | Two-stage adjustable |
| Action | Underlever |
| Powerplant | Pre-charged pneumatic |
| Body Type | Rifle |
| Cylinder Size | 480 cc |
| Shrouded | Yes |
| Operating Pressure | 3625 PSI / 250 BAR |
3.5 (3 reviews)Create an online review
4.0 4.0
3.0 3.0
4.0 4.0
Lite weight. Very easy to cock hammer spring. Universal Picatinny rail. Straight cylinder shroud for suppression experimentation. The In-line valve design seems to be slightly self adjusting on the valve opening time with feed back from the pressure pushing a projectile. Heavier Projectiles seem to balance pressure back on the valve so it stays open a little longer. Heavier projectiles do use more air but the power output tends to level out across various weights. Shooting an Air Bolt style projectile delivered over 200 foot pounds of energy and 490 feet second muzzle velocity. The 81.02 grain JSB Exact Pellet is very accurate out of this rifle. Round balls of 0.358' diameter are fast and accurate enough for game at closer ranges.
Things I would have changed:Ambidextrous safety, being left handed, the right side only safety is not convenient to access. This Picatinny rail might have worked OK on the Evanix Rex but with the big bottle on the butt end of the Gamo version, typical scope mounts won't cut it. I ended up fabricating 1 inch riser block from some scrap osage and bought 1.5 inch replacement screws to get optics up high enough I could get behind. Please change the Picatinny rail from the factory or supply precision visor blocks for the consumer to choose which works best for them. The trigger break is field expedient but a bit rough. An adjustable trigger would be wonderful.
What others should know:Read "Things I would Change" above about the Picatinny rail, too low for standard optics mounts. I tried wood block "elevators" till I got two that worked to allow a scope to ZERO at 35 yards. Parallel mounting the rail, my scope could not adjust that low to get into the bull. I found that a front block 0.060" shorter than the back block worked well enough to get sighted in. Plan to replace wood blocks with aluminum blocks. After about 20 rounds shot from the gun right out of the box, I noticed a very small screw on the shorting bench. Turns out is was one of the tiny plate screws capturing the trigger group. Luckily I saw it. Lesson: Check all screw on your new out of the box rifle for tightness. Pistol grip screw was loose out of the box as well. Better yet. Pull all exposed screw and apply a thread lock compound before use! This thing is loud like a 22 powder burner. I have had several occasions early on that the trigger would not release when taken of safety but shot after cycling.
4.0 4.0
4.0 4.0
The gun came packed well. The tank cover is a snuggly fit plastic that doesn't feel cheap and will hold up well. The overall machining, IMHO, is on the heels of Air Force brand products. The gun is very light and shoulders well. For a .357 it's suprisingly quieter than my Condor .25. Grips are aftermarket adjustable so you can throw on your favorite Magpul.
Things I would have changed:Cocking lever has a bit of play when closed; though very strong, I'd prefer it not wiggle at all. For $999 it should come with some kind of dust cap. The carbon bottle screws into the guns frame and held more secure with a set-screw; mine's was missing, PA didn't have spares nor knew the dimesions. SURPRISINGLY! neither did Gamo when I called them, but they did give me the dimension of the screw that was readily found at Home Depot.
What others should know:The barrel stops 8 inches from the unscrewable endcap. There isn't any baffling, so noise suppression takes place in this hollow portion of the shroud (DIY-ers have plenty of room to experiment with felt, mono-cores, etc for greater noise control). I mounted a Hawk Reflex dot sight for 35-40yrd applications and I'm very pleased with the gun's accuracy at this range. I'd be confident in saying the gun will do well at farther distances using a scope. I get 15 shots to a fill on full power (low power shot count claims are much higher but i dont intend to use that function).
| By HunterExtreme from USA on 2020-02-04 |
| By ZooT_aLLures from USA on 2019-03-25 |
| By dennis from USA on 2018-07-13 |
| By duy from USA on 2018-07-08 |
Got a question or answer?
Log in to participate
If this is just a modified Evanix Rex, then the TCxx manual is making the same mistake as the Rex. I have a Rex-P, which is the same action as the Rex, and I've had the entire gun apart several times now in order to improve it. The sear was damaged & refusing to release. I think this may have been from the previous owner letting the cocking lever fly back - thus allowing the hammer to forcibly strike the sear face & notch it deeply. I ground off the notch, then discovered how the geometry is actually supposed to work. Reground it with respect to the sears pivot point. Works perfectly now. Point is, I know for a fact the Rex trigger is pretty much the same as a vintage Crosman. The adjusting screw should not be played with without taking off both side plates so you can see what's happening at the sear contact point. I ground-down a jewelry size flat tip screw driver so it fit two corners inside the adjusting screw. That adjustment changes how much the sear engages the hammer. Turning it in, clockwise, will reduce the engagement until you wind up with a very dangerous action that can fire while on 'safe', even while you are loading a pellet. The so-called '1st stage' is just the slop between the trigger and the sear. A safe adjustment is to always keep some amount of 1st-stage motion after cocking (pull the hammer back with the cocking lever after turning the screw CCW, as the hammer will not let the sear drop back down). There's no adjustment for the pull, for either stage. The only way to improve the 2nd-stage pull is to polish the contact faces on both the sear and the hammer. The hammer has two contact faces. Honing & polishing the bore of the hammer, outside of the barrel, ends & length of the hammer spring - all will greatly improve the cocking. Just the right amount of grease on the hammer spring and not a light oil. The spring will vibrate if not damped down a tiny bit. The grease needs to maintain constant viscosity in a wide range of temperatures so the hammers inertia stays the same. On the 1st try, I over-damped the spring - resulting in the gun not firing on the low setting with a full charge. The portion of the body where the grip mounts is very minimal, and the screw which holds the grip is not angled correctly. So if you're not very careful in keeping all that as tight as possible, the grip will twist on the frame in use. The edges of the trigger are a bit too squared off 'as cast', and could use some work. Trigger, sear & safety are die-cast zinc alloy, with a very loose fit all around. Even the safety needed some polishing, as it was a tiny bit sticky to push forwards smoothly to it's 'fire' position. Removing the safety can result in a very tiny ball bearing heading for places unknown. With the gun upside down, sideplates removed, the holes you can see drilled above the safety, go past it to provide dimples in the frame under the safety where the ball rides
The main center section (handle-trigger assembly) looks exactly like an Evanix Rex. What is the backstory? Did Gamo just purchase the rights to the same product and slap their logo on it? Curious minds wanna know! =)
The gun is made by Evanix to Gamo's specs from what I am told. How much those specs vary from the original Rex model specs, I am not sure.
Trigger plastic like all Gamos?
No, it is metal
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Gamo Big Bore TC35 PCP Air Rifle with quick-disconnect connector (1M)
To start over click reset
Tank fill calculator
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
Customer Support
Customer Support
Copyright © 1999-2024 Pyramyd AIR. All Rights Reserved.
By Mitchell
Everything but the low scope mount.
Things I would have changed:Something is wrong with my TC35. It will not take any more air than about 2000 lbs. I pump or valve the gun to this level, and any attempt at pumping more air in results in a "click" noise near the foster fill nozzle, and any air in the fill hose is then vented. Air in the cylinder remains the same, but will not allow more than about 135-138 bar. I messaged Gamo and have only had one response from them, and that was just a question about the pump I was using (which works perfectly on all my other PCPs). I'd really like to shoot this gun, but won't as long as something is wrong with the fill system.....not impressed with service at GAMO so far.
What others should know:as above.