Replacement Probe, 1/8 BSPP, Fits Shinsung/Career, Sumatra & Seneca Rifles

Works just fine in my Sumatra

Wished i had of discovered the Male quick disconnect w/o-ring Part # Quick-Disconnect Male Fitting + O-Ring... that screws on the end of bottom tube 1st, coulda saved me 20 bucks. These are kinda thin and all o-rings are fragile and being Xtra tedious every time ya fill (which is alot on the Sumatra) is tiresome. I just ordered the afore mentioned, makes things simpler, sturdier. Make sure you use silicone grease (oil too thin) to keep them o-ring safe. Ive filled mine countless times w/ no issues. But i bought this as a back up before i knew about the other deal. I never broke the original, now i have 2...Research

fits where it is supposed to

if anything the price

to be honest when i got to hand pumping my careers 9mm and 707 i went back to my break barrels again. at 68 years old now hand pumping is a real job and break barrels are easy once you learn to leverage the actions.

There's not a lot like with this fill probe. It looks to be very well made.

Change needed is on fill end of the resivior. Need a quick connect fitting.

O-rings are hard to find( the 2 on the end. They are easily damaged. Get extras 4-6.

There's not a lot like with this fill probe. It looks to be very well made.

Change needed is on fill end of the resivior. Need a quick connect fitting.

O-rings are hard to find( the 2 on the end. They are easily damaged. Get extras 4-6.

Helped and allowed me to fill a airgun.

The seals ripped on using it the second time.

Well made, works perfectly!

Nothing.

Pyramyd Air rocks, great products and quick shipping! Great customer support!

I just had to order a second one because the first one snapped in two when I went to remove it from the fill port of my career 707. I had only had it around a month which should tell you how poor the quality is. The probe snapped into two pieces without me using any unusual level of force. I am old fashioned in that I think metal used for high pressure air should not snap so easily. I'm lucky that it didn't cause a serious injury as I had already bled the line when it snapped. I am annoyed that I have no choice but to buy another one as it is not like I have an alternative if I want to use my air rifle again.

As you can guess, I would prefer one that didn't snan after only a month (or ever).

If you have the option to get a better one made somewhere, I would do that instead. if you are stuck with this one like me, be very careful....

This probe fit a lot better than the one that came with the gun. It will work with a Sam Yang .50 cal Dragon Claw. Kind of confusing calling it a "Career" replacement probe.

List the Airguns that this will work with.

Always nice to have a spare, one for the tank and the other for a pump. Good quality, priced okay. When you need one you need one.

Fits my Sumatra perfectly

It fit my old shinsung rifle just right.

Nothing

You should lube lightly so "o" rings will last.