*Offer expires 12/3/22 at 3:00 a.m. ET. Some exclusions apply.
$19.99List Price $30.00Save $10.00(33%)
1-year limited warranty
Earn 20 Bullseye Bucks
Sold & shipped by PyramydAir
See other products by Air VenturiShare
Sold & shipped by PyramydAir
Installation instructions: THERE IS NO NEED TO RELEASE THE AIR PRESSURE FROM THE RESERVOIR. To start the old fill port turning, insert the round shaft of a punch or screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you've unscrewed your old fill port from the end of your tank, place the new o-ring in the female thread on the gun and thread in this quick-disconnect fitting. Tighten well to seal the connection. No need to depressurize the tank because the tank has a check valve.
Item Code: AVMaleCoupling [PY-A-2841]
Create an online review
It replaced the probe inlet on my old SamYang Dragon Claw with the single tank.Things I would have changed:
A little less stressful on the install: It fits but it fits so tightly I originally thought I was doing something wrong or I got the wrong part. It doesn't visually match what came out of the airgun, but it did work. It requires a lot more tightening down with a strong wrench than I liked, but so far so good. I am happy to have the quick disconnect on this gun, not that old probe.What others should know:
You will initially think the threads don't line up on your Seneca or old SamYang big bore air rifle. Check EVERY ONE of the Q&A of this item and see what other people experienced with their guns. If you decide to do this repair/swap/modification, you will want to put the quick disconnect on the gun finger tight to fully ensure you have not cross threaded the thing. Then gently start to tighten it down a couple turns. After this, hook up your hand pump. Don't use a compressor or tank! You want a small amount of air psi. Pump a few times and tighten while the air hisses out. repeat this until the rubber O-Ring is fully smashed between the parts on the inside... that's when the air will stop hissing out. Be gentle, be slow, and be careful. Good Luck. This was my experience. Your experience may vary, so make this repair/modification at your own risk.
Didn't work as hopedThings I would have changed:
Correct thread and sizeWhat others should know:
Definitely will not fir Umerex Gauntlet air tank
NothingThings I would have changed:
Make sure it fits the product .What others should know:
Wrong threads. Be careful. You could destroy the threads on your rifle.
Got a question or answer?
Will this fit Sam Yang 909?
Will this fit A Gauntlet 25 Cal with the made in Tiawan bottle?
can this be used as a replacement for the af texan spin loc tanks?
Out of Stock
This item is past due. Check back for updates.
Only 2 left in stock
Only 4 left in stock
Only 2 left in stock
Get FREE shipping on qualifying orders!
Any order $150+ with a shipping address in the contiguous US
will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout.
Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
We have a team of expert technicians and a complete repair shop that are able to service a large variety of brands/models of airguns.
Additionally, we are a factory-authorized repair/warranty station for popular brands such as
Air Arms, Air Venturi, Crosman, Diana, Seneca, and Weihrauch airguns.
Our experts also offer exclusive 10-for-$10 Test and 20-for-$20 Service, which evaluates your air gun prior to leaving our warehouse. You'll be able to add these services as you place your order.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We've got you covered! Return any item in new, unopened condition along with its original packaging and any accessories that might have come with your product and receive a refund within 60 days of purchase.
Our customer service team can help determine the best course of action and provide you with some options in the event you're interested in a return.
Learn About Returns
Join the Pyramyd Air mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Airgun safety is no accident. You must be 18 years or older to buy any air gun or air rifle in our store.
Text JOIN to 91256 and get $10 Off Your Next $50+ Order.