TSD Super 9 Pro Bolt Action Airsoft Sniper Rifle

I like the fit and feel, trigger pull and sights it is almost the same as my Savage Deer rifle.

when using the rotary magazine with the shells, when you pull the bolt back it does extract the shell from the chamber but there is No ejector the shell just lays on top of the magazine and you have to pick it out with you're fingers before you close the bolt to chamber another round So I would give it an ejector.

when I found that it did not Eject shells properly I started using the magazine that fits on the side that holds 25 rounds/ its easy to top off and you don't have to mess with the cartriges I am happy with the accuracy. I did have to drill the hole in the rear sight. I use a ghost ring on my hunting rifle so I used a sharp bit to make the same size hole that is in the sight on my Savage and I turned the Bit with my fingers to make the hole.

Low cost "entry level" bolt action airsoft "rifle". As noted by others, barrel has to be CAREFULLY aligned during installation, and rear peep has to be drilled through, but shells eject if bolt is thrown with authority. Don't know about long range accuracy. Bought it as a training aid for my grandsons. It's a perfect tool for introducing them to gun safety. As they demonstrate appropriate discipline, I'll upgrade them to BB or .177 pellet guns. ;-)

Really need to fix the rear sight, and need to reintroduce a scope mount.

Fun gun for the price.

Bolt action with nice pull. The gun is heavily weighted in the butt which helps balance and feels realistic.Easy safety.

Bolt cocks with safety on but doesn't load a BB, so a dry fire is necessary. HALF of the reason I purchased this gun is for the bolt action, shell-ejection. This feature DOES NOT WORK. The rear peep sight WAS NOT PUNCHED. I had to punch it myself, and I can only hope I made the right sized hole. It seems a bit large.

It's a nice gun and works like a dream, but it has substantial issues right out of the box. The shell ejection DOES NOT WORK.

Power, length, feel, and cocking strength

The shells DO NOT eject on cocking. The straight magazine is confusing and doesnt come with instructions. The rear sight DID NOT COME PUNCHED. I had to punch my own sight so who knows about accuracy. Also the barrel requires installation and is easily installed crooked.

Are you very disappointed with this piece I waited a long time and spent a decent amount of money to get this product only to find out that the piece that makes the shell eject was missing a valuable piece in this product I'm very very very dissatisfied with this service

The only thing I would change is my mind when I decided to buy this product which was a complete waste of my money and time

Do not buy this product thinking that it will be up to par if not don't be like me please call immediately and complain

quite powerful and accurate considering the price

Shells do not eject in my case. I have to manually take the shell away by getting fingers into the chamber. Otherwise, shells end up stucking inside.
Not sure if it was only my case or a common issues. Undergoing a refund process.

It's quite accurate for the money. 1.5-inch grouping at 25 feet using .20 g. Lots of power for a spring action rifle! Easy to assemble following the instructions provided and watching the very informative video. Easy to adjust sight for both windage and elevation. Easy to load the magazine with BBs. This rifle is a lot of fun! I like the user friendly safety lever - easy to locate and easy to operate. The bolt action operates very smoothly and the gun is quiet - less noise than my Daisy Red Ryder. Durable construction with a solid feel.

Hard to see the extremely tiny arrow on the magazine button that holds the BBs in during loading. I would make the button a little larger and put a raised dot for direction (I painted a silver dot on the arrow point to make it more visible). I'd change the sight - too hard to locate target.

Hard to find the target through the sight quickly - takes some patience.

It weighs, feels, and handles much as a normal rifle does. Neighbors don't object to the 'cough' of this rifle as they would to the 'bark' of, say, a .30-06, a .300 Win Mag, etc.

I would add a 'witness mark' to the barrel and receiver; or dimples for the locking screws; to make lining up the sights easier when installing the barrel (from the package). Still not sure have got it correct. 'Relax' the stock slightly to allow for insertion of the action, it was a humdinger of a chore.

I have not had a chance to shoot this rifle for accuracy, still working on my backyard range.

When you pick this rifle up, make sure you have plenty of room, as it is FULL size, including length.

The overall feel and the 1/1 scale of the rifle are perfect, and the shells and rotating mag make it feel and work so reel

Nothing

You know u have been hit at over 200 feet . It still makes you say owch . I am using swiss arms 40g and pulling off some reel long kill shots

It's a bolt action rifle with mock shells that fly out each time you cock the gun. What's not to like. Each time you shoot and the shells fly out as you reload, it makes you feel amazing. Granted, its impractical for skirmishes but I use this exclusively for shooting cans. It has an alternate 25 shot mag that's easier to load and won't require you to constantly pick up the shells every five shots for those that don't want the shell option.

The mock shells look and feel cheap. Some of the ones that came with the gun had protruding seams. Which would occassionally get stuck in the chamber each time it got loaded in. I sanded them down carefully so they'd be smoother and won't jam up. Hopefully that's just an isolated problem. The gun itself is fairly accurate. It's labeled at 117 ft shooting range but I've shot from slightly further distances. Accuracy suffers of course but with good aiming and adjustments i can still accurately hit a can quite often.