Type 96 Tri-Rail Bipod Adapter

Fits my AGM l96 spring sniper with some work. It does not fit it right away so i had to file off the part where the bottom rail meets the gun for like half an hour. If then fit well bit stll another problem. The pin was to skinny so i had to wrap in in some painters tape. Now it fits perfectly

specify that it does not fit an AGM l96

Dont use it wth an AGM l96 unless you have a file and some tape

all metal, everywhere, and works well with multiple things attached.

the screw that attaches the pivot to the metal rails was loose. not hard to fix, just something to watch

nothing else to say. works like I expected, but is a little on the spendy side for me. but now that I have it, I'm luvin it!

Mine kind-of fits into my Well MB05, it holds it in, but if enough force were to hit or bump it, it would pop out. I would recommend super gluing it.

Maybe make the piece that goes into the body of the gun slightly longer? Not really anything.

Mine had a couple dings on it, where silver was showing, like it had been used before, but i don't really notice it. This is still a pretty good deal for the money however.

I have searched for several years for the pin , by it self , found one on a Hong Kong site and they wanted $40.oo plus shipping ! I bought a UTG Shadow ops from Pyramyd a few years ago and shortly after a Tanaka 700 gas rifle with no bi-pod . I had a bi-pod , but no pin , two weeks ago I go on Pyramyd's site and here is the whole adapter for less than $20.oo shipped !! It pays to shop around on our USA sites before over paying over seas, Shalom , signman .

I like that it has the thre rails so you can attach the bipod , a flashlight , and maybe a laser.

I didn't like that when i attached it into my L96 , it was very wobbly and loose, so i filled the hole woith super glue and now it doesn't wobble anymore.

Overall this is a good product.