Walther Combi Rail, Fits CP88, Beretta 92FS & Colt CO2 Pistols, 11mm Dovetail & Weaver Rail

The rail worked great with my walther competition c88. very little adjustment.

It did not do too well with the beretta 92F. I am at the highest level where I can even see the screw from a side angle. And my group is still 3 inches too low.. How can I make it higher without the screw falling out?

mounts to my cp88

needs to be made from metal. the weaver mount is made to narrow and any sight that I put on it barely hold on

I'm going to have to drill and tap a few holes to get a sight on this gun nice accurate gun....poor poor mount!!

It fits well, it's pretty sturdy, it works with both dovetail and Weaver mount sights, it does the job especially considering there are no mounting screws on the CP88 and it looks good.

Make it out of aluminum. Lower the price a bit.

Yes it's plastic, but its good quality polymer. Heck I have powder burners with polymer frames, so I have nothing against plastic as long as it stays firmly monted on the gun. I certainly feels tight. And since this IS a CO2 gun with no recoil, I don't see why it wouldn't stay that way.

Nothing

The rail should be made from a much harder/stiffer material. Because it is relatively soft it is hard to mount and gets out of alignment easily. I am using it on a CP88, Umarex should tap and drill the CP88 to accept a standard metal scope rail.

I have to have a sight, I am using the Walther MRS. If you can shoot with the standard sights on the CP88 you should. The Combe Rail is a waste of money but it is the only alternative.

It works.

Metal rather than plastic.

No complaints. It does the job and I guess that's what's important although I sometimes wonder if it was metal, it might be more stable (the vote is still out on that--if I find that my POI changes with use, I'll write back). I use it on my Walther CP88 with a Walther red dot sight (very cool combo, by the way).

I mounted this combi-rail to my Walther CP88 and used the 11mm Dovetail rail to attach either a UTG red/green DOT or BSA 2X Magnification pistol scope with crosshair sights and both work outstanding. The great thing about using these scopes is they allow a perfect sight picture even with my problem eye sight. I need reader glasses to see the stock iron sights but the target of course is blurry at 30 meters, these scopes eliminate that problem and gives me a tighter shot pattern with perfect focus.

This rail is strong but not made of metal so it can have some flex to it. I haven't noticed it effecting the scopes adjustments yet. It is well made but I think it could be sold at a lesser price.

If you have a similar problem with your eye sight as me, this rail and scopes of your choice will make the world of difference.

Fits my Beretta 92 and allows me to add a red dot scope to the top of the pistol which works GREAT.

Its very pricey for a piece of PLASTIC. It had a very small bit of flex which isn't good for a scope mount, but it didn't really affect performance. The dovetail mount strip can get in the way of cross-bolts on some Weaver accessories, I had to modify my rail to get my scope attachment to mount, since the rail is made of plastic it was easy to cut a piece out of the dovetail rail, but what a pain. If you only need the dovetail mount, buy the all-metal dovetail only mount.

If I could have found an all-metal weaver-only mount for my Beretta 92 I would have bought that.