Date: 31/5/2020 19:40
0
Airgun Hunting is Legal! Check to see what is allowed in your state ⭢ Check It Out!

Air Venturi Rear Sight, Micrometer Adjustable

4.518 reviews
Air Venturi Rear

Roll over image to zoom in

Share your images

1-year limited warranty

PY-A-3191

$49.99

List Price $55.65 Save $5.66 (10%)

Add to Cart

In-stock

Estimate Shipping

Add to Compare
Add to Wish list

  • Fits Air Arms MPR, Air Arms T200, IZH 60, IZH 61 and Crosman Challenger
  • Micrometer adjustments for windage & elevation
  • 0.032-inch aperture size



In stock


Item Code: AA-6213147R [PY-A-3191]

other products by Air Venturi

Average Customer Review

4.5 (18 reviews)
3 star1 star

Create an online review and share your thoughts with other customers

5.0 5.0

5.0 5.0

By John from USA on 2019-09-13
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Very easy to install and sight in. Very accut

Things I would have changed: Nothing, designed and setup for target shooting

 

4.0 4.0

5.0 5.0

By Henry from USA on 2019-07-14
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Good price. Easy to adjust. I use it on a Diana 340 N-TEC, as far back as it will fit on the dovetails, so my sight radius is 32". for initial sighting in I went by full turns, rather than clicks.

Things I would have changed: It says the aperture is 0.32". It seems a little smaller, than that. I would prefer it a little larger, than that.

What others should know: At first the sight would slide along the dovetails when fired ( based on comments, this seems to be a common problem ). While trying to figure out what to do about that, I noticed that the clamping piece was installed upside down ( The tapered side, that is supposed to catch in the dovetail, was on top and the blunt side was on the bottom ). I flipped it over, re-installed and it stayed put. This should be checked, before resorting to some of the drastic measures mentioned in other comments.

 

2.0 2.0

2.0 2.0

By John from USA on 2018-12-12
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: I received a defective sight and Pyramyd Air refunded my money. It is constructed out of metal / sheet metal. Easy to adjust.

Things I would have changed: Never been a fan of single screw mounting systems.

What others should know: I think their are better options out there at this price point.

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • John from USA asked:

    Will this sight go low enough to match up with a blade front sight which is 3/4" over the bore? The 11 mm mount base is 3/16" over bore. So the Question is will this sight go down to a 9/16" coaxial position over its base mount?

  • Randall from USA asked:

    Will this fit on a Hatsan 95?

    • Edwin from Canada:

      It will fit any 11mm scope grove, what you will need to know is if the eye relief distance will be close enough. It will not come back as far as your scope would.

  • David from USA asked:

    Will this fit the Daisy 499?

    • Edwin from Canada:

      It will fit any 11mm scope grove, what you will need to know is if the eye relief distance will be close enough. It will not come back as far as your scope would.

See all discussions

Navigation