Date: 19/11/2018 15:42
0

Beeman Pellet Trap

4.023 reviews
Beeman Pellet Trap.

Roll over image to zoom in

Share your images

30-day limited warranty

PY-A-557

$16.95

List Price $19.99 Save $3.04 (15%)

Add to Cart

In-stock

Estimate Shipping

Add to Compare
Add to Wish list

  • Description
  • Customer reviews
  • Q & A: 1 answered question
  • Steel pellet trap
  • 4 animal silhouettes
  • Paper targets
  • Measures 9" tall, 7-1/4" wide, 7-1/2" deep, uses 7"x9" paper targets.
  • All necessary hardware included
  • NEVER use steel BBs or Gamo PBA pellets with this trap!

Max velocity at 15 yds:
800 fps in .177 cal
650 fps in .20 cal
600 fps in .22 cal

Max velocity at 25 yds:
900 fps in .177 cal
700 fps in .20 cal
650 fps in .22 cal

Max velocity at 35 yds:
1000 fps in .177 cal
750 fps in .20 cal
700 fps in .22 cal

CAUTION:
Use only lead airgun pellets & round balls. Do NOT shoot steel BBs or Gamo PBA pellets at this trap! BBs can rebound and ricochet and cause permanent injury, particularly to the eyes. Use appropriate ear and eye protection and make sure your range has a secure and reliable backstop.


Click for replacement targets


In stock


Item Code: BN-2085 [PY-A-557]

other products by Beeman

Average Customer Review

4.0 (23 reviews)

Create an online review and share your thoughts with other customers

5.0 5.0

5.0 5.0

By James from USA on 2018-08-28
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: I was looking for a versatile, portable, low cost trap for indoor and outdoor shooting. This fits the bill perfectly. The combination between the swingers and paper helps keep my son's interest up, too. The NRA silhouettes are really nice. Although an occasional miss hits and bends the hanger rod, it is easily straightened. I keep a can of orange spray paint handy. I cut sheets of cardboard to back up the paper targets when we use those. So far, it has taken a few hundred rounds. Mostly, we've used CO2 177 pellets and BBs from rifles and pistols. It is really priced right, though.

Things I would have changed: The back plate is getting distorted. Another gauge or two thicker sheet metal would help. I will probably make an insert for it. We've only shot it a few times with gas piston break barrels. I don't think it is tough enough to withstand too many shots from those. I would also put putty in the bottom if I want to use it in our unfinished basement. These are minor complaints considering the low cost and high value. It is really priced right.

What others should know: Keep track of the rubber stops on the ends of the main rod. They hold it in place. Without them, it won't stay put. I always have the opinion that something should do what it says it is supposed to do, even if the price is low. This trap has done just that. There may be higher quality out there, but this is a good overall value as long as you don't use high powered arms.

5.0 5.0

5.0 5.0

By John from USA on 2018-01-16
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: This is a nice little target/trap set up for my lower power airguns (Daisy 853 and Beeman P17). It offers all the variety I desire for my backyard, after work attempts at more formal silhouette and 10-meter target shooting. Fits 7x9 paper targets. The silhouettes are good quality.

Things I would have changed: The metal is not all that thick, which is fine for the guns I use with it, but a more powerful airgun would dent the trap.

 

4.0 4.0

4.0 4.0

By Bob from USA on 2016-10-18
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Great little trap, esp for indoors shooting, great price.

Things I would have changed: The steel is lightweight - the back plate is already bulging from about 30 strikes at 800 fps .177 pellets. Higher velocity may penetrate the steel.

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • James from USA asked:

    Are the metal animals official air gun silhouette targets size (1/10 NRA scale)? Thanks, Jim

    • Tyler from USA:

      Yes

Navigation