Loop for .177 to .20 Caliber

Nothing

Smaller size so it will fit in .177 bore

May work with .20 bore, but I could not even get it started into my .177 with a patch in place. Cutting the patches to a smaller size had no effect. One size does not always fit all.

The best

Great product

This is just what I needed to cleaning my pistols the other one was plastic

Nothing

I was happy to find this as I am discovering these cleaning rod tips are getting hard to find, most retail stores are stocking jags in the various sizes but loops like this, not so much. Work perfect on my Dewey rod, but beware, because of the thread size, will not fit on all rods.

None

I thought the thread size was pretty universal on these, but be aware, this type of loop comes in two thread sizes. This one is a 5-40 and fits most higher quality cleaning rods. These tips can also be found in retail stores with a smaller thread size, so know what will fit on your cleaning rod before buying.

IT WORKS

Solidly constructed, a very well made accessory.

Nothing.

Much better than the nylon, plastic loops that you see. It's brass and made to last

just the little tool for the job. What else can you say about a loop? Right size, built sturdy and hefty, far better than the plastic ones.

Everything seems to be proper.

Nothing else, just a lifetime purchase unless you loose it.

The craftsmanship.

Not a thing.

Make sure you have all your maintenance tools purchased to minimise down time later on. This will likely preclude your postponing your gun care. Make sure you keep logs on what you have done for each airgun so no process is left undone! Buy a chronograph! That will not only tell you how fast, it may also indicate possible barrel debris.

Very soild, well-made product. Threads in perfectly and does its job.

For delecate barrels I would use a plastic unit. My steel barrel was fine using this brass jig but it did scrape at times.

You have to have one of these. Steel barrels this is fine but anything else I would use a plastic jig.