






Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .425" Thick
PY-A-3535
Not Available
Description
- Phillips Pellet Holder
- Holds .22 or .25 cal. pellets
- 16 pellet slots
- Fits AirForce Talon & Condor airguns & Logun S-16 air rifle (not suitable for the TalonP pistol or any other smaller tank made by AirForce)
- 3"x3.25"
- Hook-and-loop straps
- .425" pad thickness
- Wrap around gun's tank or your wrist
No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun's tank or around your wrist, and you're good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.
Specifications
Overall Rating
Review This Product
Tell us what you think
9 of 9 Phillips Pellet Holder for AirForce Reviews
Price
Things I Would Have ChangedPurchased for hunting and not sure it would retain pellets. Seem like they may fall out especially since the holes don't shrink back after removing pellet
What Others Should KnowIt's convenient overall, maybe not a long term holder
Having pellets readily available
Things I Would Have ChangedSwap out the cheap Velcro straps for something elastic .
What Others Should KnowNot a bad little accessory...lot of room for improvement, but it's handy
Functional, handy, quiet.
Things I Would Have ChangedNot much.
This pellet holder is fine for the .25 cal at .425 thick.
Things I Would Have ChangedMaybe change the foam to a higher quality as that I have a few hloes that have tears in them,and the pellets do not hold very well. Change the hook & loop to elastic for easier use of putting on the arm. Or maybe offer one with elastic.
What Others Should KnowNothing.
it's nice to have pellets within reach for quick follow up shots.
Things I Would Have ChangedThe pellets seem to fall out on their own if not pushed in all the way. And when they are pushed in flush they are hard to remove quickly.
sits securely on your tank
Things I Would Have Changedmaybe have a separate version for 22 and 25 pellets. although this hold does hold pellets securely, im currently not using it because I must very carefully remove pellets to avoid skirt damage. if the foam was a tad shallower it could be less of a problem
What Others Should Knowidk im going to mod this holder and see how this works. maybe try making your own holder first unless your really not handy at all. a lot could be improved upon with this product, especially at this price point.
I WEAR THIS AROUND MY WRIST WITH NO PROBLEM. I LIKE THIS PRODUCT BECAUSE, WHEN I AM USING SINGLE SHOT RIFLES IT IS CONVENIENT TO HAVE PELLETS AT THE READY WHEN YOU NEED THEM FAST.
Things I Would Have ChangedNOTHING. I LIKE IT THE WAY IT IS.
What Others Should KnowYOU CAN CUT THE STRAPS TO ADJUST TO YOUR WRIST SIZE IF YOU WISH TO WEAR ON THE WRIST. GET THE THICKER ONE IF YOU USE THE LONGER PELLETS.
It does what it is supposed to
Things I Would Have ChangedNothing, but alonger version would be nice for people that use it on tanks
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.
View Shipping Times
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 21+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
May 14, 2019
By MvMaranatha
hold my Poly Mags (skirt first) very well
Things I Would Have Changednothing
What Others Should Knowtry inserting domes head first and pointed pellets skirt first