Tech Force Flat Pellet Trap

Takes a beating! Good deal for the price. Works perfect and is a good heavy guage steel.

Nothing.

Works great with lower powered pellet guns. Takes a beating with my rws 350 magnum so I have to move it out to 25-30 yds. Not for BB's!

5 1/2 by 5 1/2 inch five bull targets slip right in---I filled several of them with duct seal and you don't have to worry about break through or lead dust, etc.---they're heavy and stable----get a few, set them out at different distances and have fun

Not much for $11.00

Trap is heavy guage metal---before I packed mine with duct seal, there were no dents, and I was using RWS 52's, 350, Beeman R-1's, HW-77, and a couple new fast powerful Chinese rifles, all in .177 & .22----By the way, the newer, ie; last 5-6 year models of Chinese rifles are smokin'-----Well worth the money and then some----Still not as good as top line European stuff, but getting real close, nipping at their heals---I like them and I was potty trained on RWS/Beeman/BSA-----When they put out a world class trigger, it's all over but the shooting----

Very well made out of thick steal.

nothing.

Dont shoot bbs at this trap unless you have a piece of wood or something soft inside so that bbs dont bounce back.

Solid construction, slots to securely hold paper targets and does what it's designed for

Maybe if it was just a little deeper, read why below.

This is meant to be used with pellets which will deform and drop upon impact, but I've been using it with BB's. I cut a piece of carpet to fit into the back of the trap to keep the BB's from ricocheting. Without doing this, a BB can hit the metal backplate a bounce back thru the paper target right back at you. Also, realize that this trap looks large in the picture, but please read the description, it's sized to hold 5 and 1/2 inch paper targets.