888-262-4867 (GUNS)Deals888-262-4867 (GUNS)DealsVortek PG2-K Tune Kit--fits Diana 48 / RWS 52/54/460/470
For Professional Installation Only
This Vortek PG2 Tuning Kit is designed to produce smoother shots and noise dampening for your Diana 48 powerplant for High Output power over12 ft-lbs. Each kit includes the spring, PG2 Guide assembly and lubricant. With this kit, your air rifle will perform exceptionally smooth during lock-up, and quiet the close of the cycle.
PLEASE NOTE:
To have your tuning kit installed on your personal air rifle, call Pyramyd Air's Customer Service line at 1-888-262-GUNS (4867) to arrange service and delivery. To have a kit installed on a new air rifle purchase, purchase a compatible rifle, the VortekTune Kit, and Tune Kit installation service (for an additional fee) to have your rifle arrive with the Vortek Kit installed.
Tuning Kits installed by Pyramyd Air carry Air Venturi's 1-year limited warranty.
other products by Vortek
Unit Converter for Airgun Measurements
Share| Weight | 0.35 lbs |
other products by Vortek
Unit Converter for Airgun Measurements
ShareCreate an online review and share your thoughts with other customers
5.0 5.0
5.0 5.0
Things I liked: Just finished putting ~200 rounds through my RWS 52 following installation of this kit. While there is still some dieseling going on, the improvement in the feel of the gun is immense. No more "twang" in the shot cycle, a lot less vibration, and almost all of the vibration is in a forward/backward motion instead of the old spring that sent a lot of vibration side to side. Why this isn't the default spring in the gun is beyond me!
Things I would have changed: Replacing the piston seal was not easy. Took probably 10 min of trying to pry it on to the piston. Also, no gun disassembly instructions are included. If you have an older model rifle like I did (purchased ~1998), disassembly can be a bit of a pain.
What others should know: If you haven't done something like this before, expect to spend 2-3 hours on it. The 48/52/54 less straight forward to disassemble than some of the other, newer, airguns I've worked on.
5.0 5.0
5.0 5.0
Things I liked: Have bought from Pyramyd Air for years and they have my confidence in them 100%. If you are looking for an airgun or supplies give them a try. The sales people have always been able to answer my questions.
What others should know: Im a big fan of RWS airguns. The last RWS I bought was the RWS460 magnum. My first RWS was a Diana model 34. That gun gave me 15 years of trouble free fun. Not so with the RWS 460. First the cocking lever bent and just receintly the main spring bent and took out a seal. I delt with Umarex USA on the cocking lever and they are not easy to work with to say the least. They did not have the parts for the spring so I checked with Pyramyd Air and the sales person told me that I probably didnt need all of the parts I was ordering and he sent me a complete pdf parts list for my gun and said to look it over and said that a tune up kit should take care of what I needed which it did. If you need help with anything gun related Pyramyd Air will get you back on track.
Create an online review and share your thoughts with other customers. Show Other Reviews
Got a question? Got an answer?
Log in, then enter your text.
460 compatible? I put it in a 460 and lost alot of velocity and power, won't even penetrate one side of a soup can. Is this for a 460 too?
The kit as for the 460. It has been discontinued. It has been replaced by the PG-3 Kit. http://vortekproducts.com/ourstore/PG3-TUNE_KITS/Diana_460_470_48_52
The PG-2 kit is compatable. It may have been a lower power spring. The kit has been superceded by the PG-3 series kit. http://vortekproducts.com/ourstore/PG3-TUNE_KITS/Diana_460_470_48_52
The PG-2 kit is compatable. It may have been a lower power spring. The kit has been superceded by the PG-3 series kit. http://vortekproducts.com/ourstore/PG3-TUNE_KITS/Diana_460_470_48_52
2.0 2.0
4.0 4.0
See all my reviews
Things I liked: Smoother shot cycle and more power. I replaced the original spring in my rifle that was made in 1987 and had sacked out due to age. The consistency shot to shot is within 18 Ft/Sec over a 10 shot string which is way better than the OLD spring.
Things I would have changed: Made a kit to fit the T01 trigger
What others should know: If your rifle has a To1 trigger you can't use the top hat when installing this kit. The spring will coil bind before the piston can cock into the trigger group. The top hat is part of the kit and should work as received. This is the reason I gave the kit a 2 star rating.