Date: 19/6/2019 2:6
0
Airgun Hunting is Legal! Check to see what is allowed in your stateLEARN MORE

TSD 939 UHC Revolver, 2.5" Barrel

4.57 reviews
TSD 939 UHC.

Roll over image to zoom in

Share your images

30-day limited warranty

PY-1879-3827

$29.99

List Price $34.99 Save $5.00 (14%)

Add to Cart

In-stock

Estimate Shipping

Add to Compare
Add to Wish list

UHC model UA-939. This beautiful, full-size handgun holds 6 rounds of BBs in lifelike replica shells! Pop open the cylinder and pop in the shells, just like the real thing, and fire all six shots with one hand, just like the movies.

  • 1:1 scale
  • cylinder swivel, loads like a real gun
  • cocking of the spring piston by the hammer
  • rear sight adjustable for windage and elevation
  • colored front sight
  • 6 round cylinder
  • press the hammer for chambering, actions the same way as the real gun
  • gun body and grip have satin finish
See manual

other products by Air Venturi > TSD

Caliber6mm
Max Velocity240 fps
Loudness1-Low
Barrel Length2.5"
Shot Capacity6
BarrelSmooth bore
Front SightBlade & Ramp
Rear SightAdjustable for windage & elevation
ScopeableNo
Suggested forSkirmishing
ActionRevolver
PowerplantSpring-piston
FunctionRepeater
MaterialPlastic
Ammunition
Body TypePistol
See manual

other products by Air Venturi > TSD

Average Customer Review

4.5 (7 reviews)
3 star2 star1 star

Create an online review and share your thoughts with other customers

5.0 5.0

5.0 5.0

2.0 2.0

By Peg Leg Keity from USA on 2019-06-08
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: This Little Honey is a Beauty! It Just Screams "Don't Mess With Meeeeee!" Doing some research on this 2.5 inch barrel .357 Colt Python, It was a standard issued sidearm for the FBI during the mid 1970's. Less cumbersome than the Colt .45, and easier to conceal, it packed a Whallup that would stop Any Threat! What I like about this Replica is it's "Spot On" Looks. Allthough its made of ABS plastic, it dazzle's the eye with it's Realism ! It's inner cocking mechanism piston is what powers the Gun to send the BB down-range.Too bad they didn't make a Gas powered model of this one like the HG-131B. Overall I recommend strongly that You buy one NOW before they discontinue this model forever !!!

Things I would have changed: For the Price, what is there to Change ? In this case this Pistol Is what It Is ! A Kool little Spring Snubnose Python. It's Totally inaccurate, Lightweight, has annoying white writing on the right side, (which easily comes off with nail polish remover),,and will ONLY use .12 gr BB's

What others should know: As I mentioned earlier, Grab this one before it gets Discontinued. It will chamber the cartriges for the Dan Wesson, and Smoke house Airsoft revolvers FYI. This is a FUN GUN, But DO NOT REMOVE the Orange Tip because it will Look EXACTLY like the REAL McCoy,,, Thank You PegLeg

 

4.0 4.0

3.0 3.0

2.0 2.0

By Jack from USA on 2016-06-21
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Dual-acting safety: When the safety switch on the left-upper side of the trigger is pushed backwards towards the grip, both the hammer and trigger cannot be pulled, making any unintended discharge with the safety activated virtually impossible. Appearance- The snub-nose style is very nice and fearsome. Cylinder lock- Although not recommended, the open cylinder can be flung into the cylinder recess with a snappy flick of the wrist, making reloading look and feel cool. Cylinder rod- Once the cylinder swings out, the rod in the middle can be pushed in, pushing the shells in the cylinder out by about a centimeter. Unofficial half-cock- In order to spin the cylinder manually, the hammer can be pulled back about a third of the way to free the cylinder to spin clockwise. Overall, this spring pistol is almost mainly for looks, or for extremely close skirmishes especially because of the short barrel, less than decent FPS, and limit of 6 rounds.

Things I would have changed: The accuracy- This is a no-brainer because of the 2.5 inch barrel, but even from two meters away, the plastic bb's sometimes veer off the line of fire and cannot penetrate one layer of cardboard. The grip- The grip is especially cumbersome, most evidently the back of and the bottom. Shooters may find the grip somewhat awkward.

What others should know: Obviously, you get what you pay for here. Ultimately, it's a 2.5 inch spring six shot airsoft revolver that has trouble finding its target across a room. However, it's perfect for backyard skirmishes and shoots just hard enough to let a person know that they are hit, but has less than desirable accuracy, even with a hop-up.

 

4.0 4.0

4.0 4.0

3.0 3.0

By Kelly from USA on 2012-12-29
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Got this for my 10 year old son ... He loves it

Things I would have changed: Lacks power and accuracy

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • evan from Canada asked:

    can this be shipped to Canada?

    • Richelle from USA:

      No, this cannot be shipped to Canada.

Item Description

SDUA939 [PY-1879-3827]
939 revolver, simulated wood grips, 2.5" barrel, spring action, uses 6 cartridge-type shells that hold plastic airsoft BBs
Caliber6mm
Max Velocity240 fps

Recommended Accessories / Ammo / Services

Click to select from all accessories, ammo and services recommended by our experts for this model

Service Plans

TSD 939 UHC.
4.5
TSD 939 UHC Revolver, 2.5" Barrel
10-for-$10 Test!.
10-for-$10 Test!
Add to Cart
1-Year Service Contract.
1-Year Service Contract - only $15.00
Add to Cart
2-Year Service Contract.
2-Year Service Contract - only $25.00
Add to Cart

See also

Compatible with TSD 939 UHC Revolver, 2.5" Barrel

Navigation