Earn 17 Bullseye Bucks
List Price $21.00 Save $4.05 (19%)
Item Code: HN-92264500003 [PY-P-1107]
|Muzzle Energy||30 ft/lbs|
|Muzzle Velocity||909 fps|
|Energy at 25 yds||23 ft/lbs|
|Velocity at 25 yds||810 fps|
|Energy from the initial value at 25 yards||79 % Retained energy at 25 yds (an expression of the 25-yd energy compared to the muzzle energy)|
|Energy at 50 yds||20 ft/lbs|
|Velocity at 50 yds||741 fps|
|Energy from the initial value at 50 yards||66 % Retained energy at 50 yds (an expression of the 50-yd energy compared to the muzzle energy)|
and share your thoughts with other customers
Things I liked: Not much. I weighed several though and they seemed to be pretty consistent. If you have a gun pellets fall thorugh or nearly fall thru these might be ok.
Things I would have changed: Size. I have several .177 airguns, and these pellets were hard feeding in all of them. The tight fit I believe reduced speed and accuracy due to friction and deformation from the hard chambering force.
What others should know: Before you censor my review. I BOUGHT THIS PRODUCT FROM PYRAMYD AIR
Things I liked: I like'm! They really hit an old phone book big time, I 'm saying deep hit.
Things I would have changed: Nada.
What others should know: I can see why no break barrels should try these. Big!
Things I liked: Really good for hi-power rifles
Things I would have changed: Correct diameter so they load easily. You have to push in assist of a hard pusher, a finger is too soft to seat in chamber of most guns.
What others should know: Cannot work in pistols, gets stuck in barrel. Use only in rifles of 1000 fps or expect problems. Won't chamber in a lot of guns without deforming the round.
Show Other Reviews and share your thoughts with other customers
will the rabbit magnum power 177 shot in the stoeger x20
Will this work in the Crosman Vigilante CO2 Revolver?
Will this pellet work with the Benjamin Trail NP2?
sure, but they are designed for powerful PCP guns
Check their tech data and see the length/height of the rd. or if clip fed the thickness of same. if it fits in clip, no problem OR if single shot again NO problem