Date: 15/4/2021 1:41

Video: Ataman BP17 PCP Air Rifle

"From Pyramyd Air with Love." In the true nature of a 1963 British spy film featuring James Bond, join Tyler and his alter-ego "Ivan" in this epic video as they review one of Ataman's most unique airgun creations, the BP17.

See all products:

Got a question? Got an answer?
Log in, then enter your text.

  • Francisco from USA asked:

    Can a longer barrel be fitted by removing the 14.5 inch stock barrel? If so, where can such barrel be ordered, the length and if a moderator can be installed, or would that be a seperste step carried out by a different business? Thank you in advance.

    • Mark from USA answered:

      That would be a custom job. We do not machine barrel blanks. Nor are there longer barrels from Ataman.

  • John from USA asked:

    Could this shoot slugs?

    • Francisco from USA answered:

      Yes it can. For example, the H&N Piledriver at 21 grains would diminish the velocity to approximately 803 fps, but would provide more kinetic energy (fpe) because the slug would be in the barrel longer to accelerate fromm the expanding gas at its base; although, diminishing, but still expanding. The 14.5 inch barrel is too short for the coefficient of the barrel frictional forces to overcome the momentum buildup by the acceleration energy, which is ashame to have such a short barrel for so much capacity.

    • Tyler from USA answered:

      If size appropriately, sure. Though I doubt it will produce the velocity needed to stabilize them

  • Kevin from USA asked:

    Understand that is is shrouded. Is the shroud end threaded to accept an adapter and to add a moderator?

    • Benjamin from USA answered:

      From recent, first hand, experience I concur with Jeff that the factory end cap is truly a pain in the behind to remove. What finally helped, granted a day or two of soaking in a mix of lubricants helped, was to carefully heat the area with a torch. It did not appear to damage the paint/coating, but I make no guarantees on that. Once off, as others have said the DonnyFL adaptor works perfectly. Cheers

    • Jeff from USA answered:

      Yes, but be advised, getting the end cap of mine was a chore....couple of sets if needle nose pliers to fit into the two holes and unscrew the end cap. However once off, the DonnyFL adapter for perfectly and the DONNYFL sump makes the gun very quiet.

    • Tyler from USA answered:

      Yes it is threaded. DonnyFL makes a nice adapter that would allow for a more standard threaded "extension" to be added.

See all discussions

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping during checkout. Certain restrictions apply.

Additionally, receive free no-hassle shipping for orders under 10 pounds, between $120 - $149 and with a shipping address in the contiguous US including P.O. boxes and military APO, FPO and DPO destinations. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order. *Must be 18 years old. Message Frequency Varies, Text HELP for Help, STOP to Opt-Out. Message & Data Rates May Apply.