Roll over image to zoom in
1-year limited warranty
Earn 550 Bullseye Bucks
List Price $649.99 Save $100.00 (15%)
as low as $49/month
Out of Stock
Estimated in-stock date 08-22-17
Place your order now for delivery priority!
Excluded from coupons
This item is not eligible for coupon discounts
Air Venturi Carbon Fiber PCP Charging Station
One of the largest charging tanks available in the marketplace, the Air Venturi Carbon Fiber Charging Tank weighs much less than a steel scuba tank. Better yet, the advantage of carbon fiber over steel allows for a higher pressure capability of 4,500 psi, meaning more charges for your favorite PCP airgun and more shooting time for you.
Fill your air rifles and pistols with the simple fittings and be on your way to more pest control, target shooting and even competition. With 4,500 psi and a substantial 74 cu. ft. capacity, enjoy the most refills of your 3,000 psi airguns. The tank features stainless steel fittings, a 24 in. microbore hose and a rubberized hand wheel for controlled filling. The integrated pressure gauge lets you know when you're reaching your full charge, and the bleed valve is conveniently located on the valve.
Even shooting teams will be delighted at the number of fills they get from the Air Venturi Carbon Fiber PCP Charging Station. Averaging more than 35 fills, this tank is a practical choice for many shooting venues. For example, approximately 32 charges are provided on a 3,000 psi gun with a 215cc cylinder from a beginning gun reservoir pressure of 1,500 psi. You can expect more than 15 full charges on an empty 3,000 psi gun with a 215cc cylinder. (The total number of fills vary based on the maximum charging capacity and the reservoir size of the gun(s) being charged.)
This compressor features an in-line gauge that shows the pressure in the line as you are refilling the tank, which is helpful to prevent overfilling. This gauge does NOT show internal pressure! To check your internal pressure, plug the end of the hose with a test plug and open the valve with the bleeder fully closed.
Additionally, there may be a slight movement in gauge’s valve connection when not under pressure. This is no cause for concern and will not cause any leaks or malfunctions in use.
This tank has a 5-year retest cycle and a 15-year life cycle.
Before purchase, please contact your local air supplier to see if they can fill this tank or buy one of our compressors.
This carbon fiber tank has a 300 bar DIN valve. Your local dive shop will have the ability to fill your tank.
If you plan on filling your high-pressure carbon fiber tank at a paintball shop, you will need to fill through the hose on the charging station with the Air Venturi Double Male Quick-Disconnect Coupling AV-00046 [PY-A-5202].
To fill at a firehouse, you will need to fill through the hose on the charging station with the Air Venturi Firehouse Adapter, Male SCBA Fitting With Male Quick-Disconnect For Adapting To Firehouse Fill Stations AV-00048M [PY-A-5750].
PLEASE NOTE: This is a carbon fiber tank. In many towns your local fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use similar tanks for breathing equipment during rescues.
This item is not eligible for coupon discounts
and share your thoughts with other customers
Things I liked: Pyramyd Air is Simply THE BEST!!!,,,,,,,I first Ordered the "Air Venturi Carbon Fiber Tank, 4500 PSI, 74 Cu Ft" Lst Year, when it First came out,,,and was Mistakenly sent the "Wrong" tank that didn't have the "Transport Canada" seal on it,Thus i couldn't get it Filled here due to Restriction's, After letting P/A know about my situation,,,,They Sent me a *New* Tank Free of Charge!!!!,,,,,,Now, Who does that i this Day & Age?,,,,I'll tell You Who,,,,,Only a Company who "Truly" cares about its Customer's!,,,,It's one of the reason's I've been a faithful Customer of Theirs for 15 yr's!, and Plan on being so for a Long Time to Come!. I have 4 Hatsan AT-44's, as well as a Benji Pioneer Airbow,,,,and This Tank doesn't have any Trouble Keeping them ALL Filled for quite some Time!,. The Tank is Extremely Well-Made, and will Last You Yr's!!!
Things I would have changed: An "Included" Carry Handle would be a Nice Touch.
What others should know: Any Canadian Buyer's, Should make sure that the Unit has The "Transport Canada" seal on the Tank!!!!, As w/out It,,,You Won't be able to Fill the Tank in Canada!!
Things I liked: Nice size holds plenty of air but not to big not heavy but well made , I carry mine in a small hold all to stop it getting scratched up fits perfectly inside
Things I would have changed: Lower price would be nice
What others should know: 4500psi so before you buy make sure you can get it filled
Things I liked: Easy quick fills for my PcP. I fill it at my local scuba shops for $10, get about 40 fills on my BullBoss.
What others should know: Make sure you have the right adapter for your gun, I needed a male quick connect adapter for my hatsan tank.
Show Other Reviews and share your thoughts with other customers
What is the output regulated to?
Is the output on this tank regulated like the 90 cubic inch tank to 2900psi? If it is, it will not be of much use filling my hatsan nova or Ataman tactical rifle. Both of those rifles fill way beyond 2900 psi.
No, it is not regulated.
What is manufacture date on this product and the interval between hydro tests? I should have read more. Retest is on 5 yr cycle, but I'd still want to know date tank was made. Thanks.
Usually they'd be no older than a month or two. And yes, 5 years between hydro tests.