JTS Airacuda Max PCP Air Rifle

The JTS is a great bang for the buck, its very accurate and delievers a lot of power.

I would like a more tune friendly version and maybe more shots per fill up!

Don't rely on JTS when you need help, they will not return phone call or answer emails. Pyramyd was very helpful when it came to backing this product and answering questions!

Very accurate when it works as advertised.

Build quality and parts not too good. Build quality equates to a $200 rifle.

Alot of people in the JTS fb group are having problems with this model. Kinda sad, I had high hopes for JTS. They seem to be putting out products before they work out all the bugs. If had it to do over again I would order from a different comapny. This was my first pcp and most likely my last.

The gun

Where I order it from. Leaked from the case and all 20 zeros were done in 35 seconds span. Got leak test still didn't hold air. Bad company

Feels good, shoots good

Only problem is it leaks about 450lbs of air overnight even after paying for the leak test and the 20 for 20. Not sure what there standards are for the leak test but this one is definitely leaking.

Accuracy, looks

to new yet

n/a

Accurate/ powerful

Started to leak 500 psi overnight/ sent back/ relieved now it won't even fill leaks so fast

I would look at different manufacturers.....very disappointed had in hands 10 days...they had it longer than me...need return again....sad

Accurate powerful

Customer service bad...only owned 40 days now loses 500 psi from full overnight...down to zero in 2 days...the 60 day money back is misleading....Customer support says jts issue and can't provide who pays shipping for repair even....I list faith in customer support...do not recommend

Nice looking rifle and accurate...buy won't hold air

After owning this gun for 10 months, it shoots 18.13 grain JSB pellets in dime-sized groups at 40 yards. I have only encountered one issue so far. It is crucial to be very careful when using Crosman hollow points in the JTS gun. I experienced a jam when I tried to force it in, resulting in the bending of the pin that pushes the pellet into the chamber. Despite contacting JTS multiple times, they did not respond to emails, and the phone conversations were frustrating. Eventually, I decided to bend the pin back myself, and now it works fine. I am currently experimenting with 100-yard groups and plan to purchase 21 grain pellets from JTS to see how they perform. Overall, I love the gun, but the JTS service is lacking. To be honest, the warranty may not be of much use. If you are looking for a great, affordable, and high-performing gun, this is a good choice. However, it is advisable to learn how to replace seals yourself, as JTS may not provide assistance in this regard.

Id like more shot count and JTS fix your cusomer service!

The gun weighs 8 pounds and man its a tank I still love it though also get a size up if you get a moderator for it cause it will clip your moderator!

It is an accurate air rifle.

JTS management's ignoring of customers and their legitimate issues - see below.

This is about a defective Airacuda Max and JTS' spokesperson, Travis Whitney. I purchased the Max on February 17, 2024. But because of winter weather in Rochester, NY, was unable to get it to a range before April. Once I began using it, it began to leak air. The leak became more obvious in May and June. I communicated with Travis many times, each time he suggested I perform DIY tricks but not being a gunsmith, and not intending to violate the terms of the warranty, I asked that his firm do so. After two times sending to TX, it still leaks air and Travis refuses to respond to phone or text. According to the terms of the warranty, I am owed a replacement. According to posts on social media, I am not the first person to have this trouble with JTS so I am probably going to have to elevate this matter to a more formal venue. I advise all those interested in JTS airguns to be very careful about purchasing anything they sell until they support their products post-sale.

The fact it's all metal and wood. Not plastic. Very accurate . I get about 40 to 50 full power shots per fill. Not very pellet picky but, jts 18.1 is the best I've tried so far. My pellets run an average of 955 fps and I get 1/4" groups at 35 yards and 3/4" or less at 50 yards off the tripod. Most accurate pellet gun I have ever owned. This is my first PCP. My Airacuda Max was the batch released in or about Apr-May 2024.

Need external way to adjust regulator pressure and power screw.

It's definitely worth the money so long as the price does not increase. Currently $420. Maybe it will even drop opening up PCP airguns to more individuals. Customer service needs to improve, but it's still a new company. It will take a little time to get everything going and orginized. I also think JTS should look into a higher tank pressure. Currently 3200 psi is reccommended but have seen several others using up to 4500 psi with no problems. That would most likely bring count shot up to atleast 100 shots per fill with regulator set at 1,920 psi. (Caution!!! and NO! over pressure should be used unless JTS decides different) if they ever do...........