Air Venturi Air Tank Carrier With Tank Stand & Protective Netting

Provides a way to keep my tank from rolling around and allows for easy transport.

The stabilization plate could be longer.

This product performs as expected.

Fast and careful shipping and packaging. They did a really good job at protecting the tank. The hose is top notch and the tank is well made. Gauges are great too.

I would reconsider the additional 20 dollars I paid to fill the tank prior to shipping because for some reason, they only filled it half way.

I paid 20 dollars to fill the tank to 4500 psi. Prior to shipping, But I received it with only 2500 psi. Not too satisfied with that. Everything else was fine.

It is easy to attach to the tank and trim the netting. Price is very good for this product

No instructions with it. And the plastic base feet crush easy. I figured out to put the plastic base inside the netting and then cut the netting to allow the feet to stick out. A little guide would ease setup.

Just what i said about cutting the net for the feet.

Nice fit extra tank protector

This protector makes the tank so much easier to carry.

This is a one size fits all carrier, which is easy to install and provides for a good way to carry your air tank.

I would change the base as it is a non-ridged support, and would be better with a firm support with rubber feet. The upper portion of the carrier strap needs a firm piece to keep the front and back pieces separated, as they tend to pull together when they carry the weight of the tank.

Constructed well

My eyeglasses ! (read below)

Please read the description carefully, this setup does not fit the 100 CUBIC INCH tanks. Both the netting and Velcro straps are too large for the small portable tanks. This setup is meant for the larger 78 and 98 cubit FEET tanks. Example my: Air Venturi Mini Wingman, 100 CC PCP tank (PY-A-8955). The cost to return in influencing me to modify it and use the netting. Otherwise the product is strong and I will give 4 stars

The carrying strap and the mesh netting are not to bad.

The base is way to flimsy.

There needs to be a proper way to attach the base.

It is a piece of mind to protect your +$500 tank.. It works as is designed... I have the 74cuft tank and ended trimming excess length. I am happy camper. Cutting to fit is the reason for 4 stars on overall rating...

Great setup and highly recommend for protecting your tank. Handle is comfortable when transporting and netting is decent as well.

The tank stand is kinda cheap feeling and is a little hard to get into place. It does work but I thing there could be much better solutions.

The carrier seems to work OK. You can move the location of the handle and feet so that the tank is balanced when being carried.

I would like a little longer feet. When you set the tank down on rough ground, I don't think the feet really hold the tank still. If the feet were a little longer, I would feel better about leaving the tank on the table. I would like some way to hold the tank up-right. Trying to watch the gauge on the tank, on the rifle, and turn the knob on the tank would be much easier if the tank were in an upright position. I would like to have "D" rings so I could attach a shoulder strap, too.

The microbore fill tube that came with my tank was 36" - not long enough to go from the tank sitting on the ground (so it does not roll off the table) to the fill port on my rifle. I had to purchase another fill tube and a male-to-male adapter.