Air Venturi 4500 PSI Quick Reviews

good solid product, quality and craftsman ship great. fits into fitting snug.

have a way to attach a lanyard from the dead head to the hose to keep from losing it.

The size of the product is small enough it would be easy lost or misplaced. I have taken a 1 1/4 in fender washer and polished center of washer so that the dead head could be snuggly pressed into washer, then i drilled small hole into washer and attached a key ring to washer. I plan on getting some plastic coated steel cable with crimps.

Not to spec. Unable to lock into the female fitting on my Air Venturi carbon fiber tank. Received two, each one in zip lock bag with China sticker. Neither one would work. Customer Service suggested possibly restocking fee & store credit only- for defective parts in zip lock bag? Tech support solved issue by refunding the items cost and advised that sanding would make these Dead Heads work. They did offer to send me a 3rd party female connector that was supposed to work. Last thing I need is more out of spec loose tolerance parts. By the way, my tank connector is branded Air Venturi which connects flawlessly to my RAW. Since the only other item in my order was $5 felt cleaning pellets 22cal so the non refunded shipping was quite expensive. This left me with a bad feeling when defective parts might incur restocking fee and only other option is pa gift card - my money back please I don't want to order anything else from you.

I understand for businesses that dealing with the public can be trying. Enacting policies that penalize customers (restocking fees) and tie up refund money (gift cards) for defective items or other seller generated problems is a no go for me. Unsurprisingly there were a few other PCP shooters at the range who will not deal with PA.

$10.00 for 50 cent part (.50 not accurate but you get the idea) that you will need to sand to make it functional is not ok!

Definitely caps the end of your line. Can be utilized to check the available air in a tank.

These (I have 2) are more difficult to remove and I have to twist them, some times with pliers. Other brands/makes work equally well but remove more easily.

This will work on my EC3000 hill pump to test the pressure shut off.

Give the plug a much larger head. Its too small even for small hands to grab ahold of.

Like i said it's small. A ring at the top i think would make it less likely to lose. It's really pricy considering what it is.

This will work on my EC3000 hill pump to test the pressure shut off.

Give the plug a much larger head. Its too small even for small hands to grab ahold of.

Like i said it's small. A ring at the top i think would make it less likely to lose.

Does what it is supposed to.

Maybe add a ring through the top nut for pulling it out. The nut top does no good since this is not a threaded plub.

no, it works.

It fits my Umarex hand pump just fine. I mainly just leave it plugged into the pump to keep the end from getting anything in it while not using it. It is good to test the gauge and leaks.

None

If you need it. It just works.

Had shipping issie, pryamydair took care of it right away

Works as advertised.

Add a connection point so that you could attach a lanyard to keep track of it.

No gauge on SCUBA tank, use the dead head to check remaining pressure in tank and to keep dirt/grime out of the fitting.

KEEPS DIRT OUT OF ALL HPA LINES...LITTLE EXPENSIVE..BUT...

I use this to keep my female Quick Connect closed off while I'm not using my air tank to keep dust out of it.

This thing is ridiculously priced. It is waaaay overpriced!!!

Works great for keeping dust out of your female Quick Connect. You're going to pay about $20 for a $2 piece of metal.

Product fit and finish are great. Good deal for the money

Nothing

This is a good product for the price

Works fine

Bigger head to grip onto