Page 2 - Air Venturi CO2 Bulk-Fill Adapter Reviews

Simple to set up. I used plumbers tape as suggested by others. No leaks. The shots are more consistent over a much greater period of time and the full auto really loves the increased capacity of the 12oz tanks. I now shoot and shoot and shoot. Before I worried about the 88 going dead and the $10 cost to replace it. Shot it till the bb's just dribbled out the barrel. Now I shoot till I am no longer satisfied with the power level (several hundred shots) and have the tank topped off, there is an actual valve so you can unscrew it and not loose the rest of the air in the tank like what happens with the 88's. the cost for fill is under $5. Wow. You really need to try one of these. I got two tanks and am thinking about a third.

offer it with the gun.

My adapter was in good shape. Some complained about the quality of manufacturing but the threads on mine were fine. To get the full enjoyment out of this gun you need a couple 12oz tanks and a red dot sight. People who try this little gun don't want to give it back.

Fits and screws in tight for no leaks

Lower price but nothing else

This makes your ebos shoot a very long time and saves on buying those 88 canisters which can cost a lot of money. This also saves on trash which is eviormental sound ,huh.

Works as designed.

The quality of the threads on the small end left much to be desired. Very rough and required some polishing before it would screw into the gun smoothly. Not a biggie, but they could have done better with only a little more effort. A bit over priced for what you get.

Be sure to screw it into the gun tight or it will leak. You'll need to use a nail or other small rod in the hole on the side to get enough torque. Try to get a feel for how tight you must set a CO2 cartridge and duplicate that plus just a little more. Don't leave your big tank connected for long periods of time, or if using a remote line turn it off, otherwise any small leak in the gun will waste your CO2. Unscrew the tank from the adapter, not the adapter from the gun to avoid wear on the gun.

Hole for leverage to turn adapter in tight, black anodized finish.

Nothing.

Couldn't get it to seal completely on my EBOS. Or maybe it seals but there is a leak internally with the gun's valve. Still, it is such a slow hissing leak that it works with a 20oz cylinder muuuuuuch longer than the 88g, expensive ones. Am happy with it.

saves a ton of money by using a paintball tank instead of the 88g cylinders.

if it had an internal pin valve that would be nice but not needed.

I emailed pyramid air before buying and stated that i understood it was for the ebos but could it work for an 850 air magnum? i received a five word response "sorry, no it does not". well i bought it anyway as i could not see any reason why it wouldn't and sure enough it works great with the 850 air magnum! not sure why they said it wouldn't?

Does what it is supposed to.

nothing

if you add a 1/8 inch male quick disconnect to the end of this and a remote line, you can use it to replace the 88 gram cylinder in just about any gun. I've used it on the Crosman nightstalker and the Walther S2000 shotgun in addition to the Ebos and it works great.

being able to up size co2 tank.

hose connect so i can use the stock.

good buy.

Quick install, fits well. A must have for the EBOS as the beast sucks the CO2! I didn't notice any excessive burrs from the machining process like other reviewers have stated.... Maybe I got a good run!

The price... but I realize that it is a custom machined part, and coated too! Pyramid Air should keep these in stock as I had to wait a few weeks to get mine... But fast ship once they got it on the date they stated that it would come in! Thanks for the great service PA!!!

Buy it for your EBOS.... Get a remote line and through the 20oz tank in your pack back or screw the 20 oz tank directly in....Get a butt plate/stock if you do this as it is much more comfortable with the butt plate on the tank!

Adapts a 9oz or larger paintball tank to my RWS 850 and Crosman 2250XT. Nicely anodized.

The threads inside & out had very bad burrs. They had to be cleaned up before use. The disc in the female side with the pin valve pusher is plastic. I'd like to see a steel or all aluminum version.

Using this bulk fill plus a remote line on my ebos is great,and saves me alot of money:-)

Still had to put teflon on the tread to avoid any leaks,should have built in silicone washer on the male and female end

Get some teflon plumber's tape

It will save you MONEY!

Pyramyd Air has it for a great price and it will pay for it's self after two tanks!

the hole, which makes me able to place metal rod into it as not to disturb its position as I remove cylinder.

Make out of metal not plastic. Could be cheaper being plastic.

No,other than knowing metal to plastic isn't a good idea. So possibly making metal insert to metal adapter would be better.

NOW I HAVE A 12 0Z CO2 TANK CONNECTED TO MY E.B.O.S.

DOES NOT SEAL WELL. I HAD TO BUY TWO O-RINGS. ONE FOR THE FRONT OF THE ADAPTER AND ONE FOR THE TANK. ONCE TREADED IN AND REMOVE THE ADAPTER HAD BURRS ON THE TREADS

YOU NEED THE BIGGER CO2 TANK WITH THE E.B.O.S.. IT WILL EAT THRU ALOT OF 88 GRAMS CYLINDERS FAST. BECAUSE IT'S THAT MUCH FUN TO SHOOT. ONLY $4.00 TO REFILL. NOT SURE HOW MANY SHOTS I GET YET FOR ONE TANK.

It allows me to connect a 12 oz refillable tank to my EBOS. It lasts a long time on the gun.

After installing the adapter, remember to tighten it fully by inserting a small screwdriver(or similar) through the hole and turning. This will prevent you from getting a freeze burn on your finger when attaching your tank to the adapter!