Page 7 - Air Venturi Female Quick-Disconnect to Reviews

Snugged up tight on my Hill pump and it allows me to quickly change between filling different guns.

Nothing

A little teflon tape on the threads will help if you're getting leakage.

this is what you need to hook up to a 1/8 NPT foster 4500psi the descriptions can be confusing

It is great convertor. But what I first received was without o-ring and of cause it had big leaking. It is same time ordered with Air force talon ss, So I don't know where the problem located and returned whole shipping package including scope and pellet. When asked Airforce expert, they told me it must be o-ring lost.

They should provide spare o-ring in case loss or wear out. Pyramyd should send back returned product to manufacture or carefully check, and then can re-sell.

Check two o-ring, when you receive it.

Great Quality

Nothing

N/A

Easy to install on a Hill pump.

nothing

Installed directly on a Hill Pump to use with a Benjamin Marauder 22 Rifle.

Easy to install and good tight fit. It works!

It fit my Air Venturi Scuba tank adapter and now I can fill my marauder. Happy Happy.

Nothing

This will fit a Marauder. But, I'm sure you knew that already.

Works as it should, no tread tape/seal needed.

Very pricey for what it is, should be no more then $10.

Fit correctly with no issues

When buying a Hill pump, be sure to purchase this correct fitting. I purchase the wrong one first but it was my own fault because I didn't read the discription fully.

Fit onto my Hill MK3 hand pump without a hitch. Works perfectly with my Talon SS.

Nothing.

This is what you need to connect you Hill pump to something like a Marauder or Talon/Condor PCP air rifle.

I used this to connect my Hill pump to my Marauder

Add a small coat of liquid Teflon to the threads from the factory like paintball part manufacturers do because most people might not have teflon or loctite

be sure to use teflon because you can strip your threads very easy remember it is high pressure and a leak is potentially dangerous

Quick and easy with no leaks. Works great with the mk3 Hill hand pump and marauder.

Nothing.

Tighten the nut with a wrench and you are ready to pump.

it works

include it with the air venturi scuba fill.

if you order the air venturi scuba fill it does not come with this...don't forget to order as the adapter this one comes with is to metric threads...skip ordering the cheaper black fitting that leaks.

Don't leak

Add dust cap & include gasket

No

Convenient to use.

The one i got fits my airforce guns a little loose and will leak a little if you push it sideways while connected. A little expensive.

Works fine if you position it well,if it leaks just reposition and reattach

Works great!

Include it with the Hill pump

This is the adapter I used for my Benjamin Marauder and Hill pump.

It's heavy duty-It's plated to resist corrosion-It gets the job done no problem

Not a thing

This is the one to buy-Period

This product works as described. I installed it on a Benjamin pump and it works like the original.

Nothing about the item. I would ship for less as this is a small item that could have been shipped for less cost. This is why I clicked 4 stars for the value.

Shipping was fast.

This works well, goes on easy, comes off easy, no leaks. It works the way it is supposed to.

Less costly.

Avoid the cheapie, it will, at some point, fail and ruin your shooting day.

looks good on my hill pump.

price.

works well on pump.