Page 14 - Air Venturi Male QD, 1/8" Reviews

Adapter works great, no need for Teflon tape with the delrin seal.

They need to make this with NPT threads.

A must have for pcp.

The adapter works perfectly, no need for teflon tape with the delrin seal.

Shipping method and charges. Item arrived in a box large enough to hold several HUNDRED adapters. I was charged $7.99 for shipping and the actual postage marked on the box was $5.99. It could have been shipped in a padded envelope for about $2. I will shop around before I buy another small item from Pyramyd.

This is what should have been included with your probe for filling your Hammerli rifle. It takes the BSPP male threads and makes them work with the quick disconnect that is used on 99% of the air gun fittings in the good old USA. BSPP is British Standard Parallel Pipe which is used in the UK, Europe, Asia, Australia, New Zealand and South Africa. It requires a washer instead of thread sealant, this one is the seal inside. US and Canada connections typically don't use BPSS, they use NPT fittings that use thread sealant instead of a washer seal.

Works great.

If you are ordering a Hammerli rifle that uses a probe to fill it, you can order this now or you can order it later.

It works super and it avoids having to change fittings now it's a one step fill. You can fill all your pcp from the same connector. Bravo

Pyramyd photo staff please look close at the picture of this item you have on site it shows the item with a messed up thread at its opening!

A must have for pcp enthusiast.

Solid, good plastic insert seal, very usefull. I buy one of these with every gun that has a different fill port connector/probe. Having already installed the "female" countepart on the scuba airhose, It makes changing the fill connection as appropriate to the piece being filed. No tools required.

Threads need to be better machined. A bit rouge and can be creoo threaded if not carefull when installing it on the filler probe.

Keep your "O's" silicone lubed.

No leaks

I used this on the quick fill adaptor for a Webley Spectre/FX Cyclone so I cna charge it via my Benjamin pump

I LIKE THAT IT IS ABLE TO HANDLE 4500 PSI.

NOTHING.

BE SURE TO KNOW THE PRESSURE RATING OF THE FITTINGS THAT YOU INTEND TO USE TO INSURE YOUR SAFETY WITH HIGH PRESSURE EQUIPMENT. HAVE FUN SHOOT SAFE.

In stock, expediant delivery, just what I was looking for, worked for my application.

None

No

Made from steel not brass. High pressure rated.

Nothing

These fittings work on every probe or fill adapter I have. They seal nicely and are rated for high pressure air. Price is excellent compared to other offerings. Stick with steel and high pressure rated fittings if you are using HPA. Brass may work fine but for this price why risk it?

good solid hardware,perfect fit,quality steel

nothing

some the plated hardware out there is not quite up to the quality of these fittings.I looked around and for the money these seem to be the best buy.

Rated to 5000 psi. Fits well to female quick disconnect.

Include a Dowty-type seal.

The threads are better on this one compared to the previous ones.

High pressure rated.

Threads better than first one, but still a bit rough.

Works great with Air Force female quick disconnect.

Tough material.

Quality is poor. The female threads were very rough and had burrs. The male end had insufficient material to complete the form.

Pyramyd Air stepped up and sent a replacement quickly. Great service on their end. Air Venturi has a QC issue that needs to be addressed.