Date: 6/10/2022 2:20
0

Air Venturi Male QD, 1/8" Reviews

Air Venturi Male QD, 1/8" BSPP Female, 5000 PSI, Delrin Seal

Air Venturi Male Review

4.5 (270 reviews)
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

3 of 3 people found the following review helpful:

5.0 5.0

5.0 5.0

By joseph from USA on 2018-03-23 12:53:17

Things I liked:

Quality made. Fits secure on fill probes to my Gamo Urban and Hatsan AT44PA. No air leak when pumping from my Hill pump.

Things I would have changed:

Nothing

What others should know:

Do not forget to install Delrin seal and snug up w/ 14mm wrench to prevent leaks

The most helpful critical review

0 of 0 people found the following review helpful:

1.0 1.0

1.0 1.0

By Gavin from USA on 2021-06-26 15:28:20

Things I liked:

looked well made

Things I would have changed:

One that would work!

What others should know:

Well its about ten bucks but another 10 bucks to ship it...so essentially its a 20 dollar item, It could go USPS anywhere in the nation for 4 bucks...seems shipping is being used as a profit center. However, that would have been bearable if the fitting had worked but instead I had bad blow by between this male fitting and two different female quick disconnects so bad in fact that it would not even fill my air rifle

Sort by:
Filer by:
  • 123 ... 1314 Next
  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Perfect. Just what I needed

    Things I would have changed:

    None

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Nicely machined and finished.

    Things I would have changed:

    Shorten the hex/threaded length.

    What others should know:

    It is too deep to work with the fill probe for a Kral Puncher. The probe has an insufficient length of thread to contact the washer so you can't seal the probe to the adapter. You will need an adapter with a shorter threaded length.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Well made, no burrs or gouges that could cause a leak.

    Things I would have changed:

    Nothing. It is exactly what it should be.

    What others should know:

    I have found that Air Venturi products are of excellent quality. One time I had an issue with an item and Air Venturi immediately sent a replacement and just advised me to discard the original part and not bother to return it. That made rectifying the issue very easy.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Speedy helpful service

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Works great on my hatsan piledriver

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    It fit perfectly on my hatsan piledriver thanks

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Well made, perfect fit.

    Things I would have changed:

    Nothing

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    simple enough to use and works well after figuring out that you need to use the seal that comes with it and the ring that comes with the gun

    Things I would have changed:

    maybe instructions stating that you have to use the included seal and the rubber coated seal that comes with the gun seals.. I didn't know what the one was that came with the gun.. I put the seal that came with the adapter and it leaked but there's a rubber coated steel that came with the gun and that solved the leak..

    What others should know:

    just remember that you have to use both the seal that comes with the adapter and the one that comes with the gun

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Makes changing adapters quick and easy

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Inform airgunners to tighten with wrenches so there are no leaks

    Things I would have changed:

    Nothing

    What others should know:

    No

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    The item was as expected..excellent quality..

    Things I would have changed:

    none

    What others should know:

    you get what you pay for...

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Works great

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Just what I needed. I bought the Air Venturi Microbore DN2 hose, item number Air Venturi Microbore Hose, DN2,.... This male QD threaded onto the end of that hose so that I could plug it into the filter I bought for my air compressor. High quality steel. No leaks at 300 bar/ 4350 psi filling my Avenger.

    Things I would have changed:

    Maybe include one of these free with the Microbore hose I bought? : ) Ha!

    What others should know:

    I learned the hard way that if I stick to 1/8 BSPP threads and 1/8 Foster QD fittings, I don't have compatibility issues. Beware of hoses and fittings with metric or other strange thread types.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Worked to adapt the Umarex ReadyAir to both my Hatsan Bullboss Wood and Blitz.

    Things I would have changed:

    Nothing

    What others should know:

    This is needed to fill Hatsan rifles.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    well made

    Things I would have changed:

    nothing

    What others should know:

    no

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Great to attach to the fill probe for quick disconnect so I don't have to remove the probe to charge my other gun cylinder wearing out the Orings.

    Things I would have changed:

    Nothing

    What others should know:

    Easy to use.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Rock solid Foster style connector...6 ball bearings make for vault-like security!! Great price, fast shipping, very pleased.

    Things I would have changed:

    Change nothing!

    What others should know:

    No

  • 5.0 5.0

    4.0 4.0

    Verified Purchase

    Things I liked:

    Fits my compressor and adapts to all 3 of my airguns.

    Things I would have changed:

    shipping cost is really high

    What others should know:

    works with krul and hatsan

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    It works perfectly and fits snuggly.

    Things I would have changed:

    Nothing

    What others should know:

    This is a perfect fit on the fill probe for the HW 44 pistol.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Works good

  • 123 ... 1314 Next

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.