Air Venturi Moly Metal-to-Metal Paste Reviews

the canister with screw on lid, paste is easy to apply.

nothing

I have used moly graphite grease in auto motive use, I suggest wearing gloves, feel of the paste is very smooth not tacky as grease is. Easy removal from hands with warm soapy water, however that being said its easily transfers from hands to other surfaces, I cut the end off a Q-tip to apply to bolts on my rifles, moved the bolt back and fourth a few times, bought to reduce the friction of bolt cycling it works very smooth and and doesnt bind after applying, it doesnt take much, cliche" a little goes along way. used the plastic end of qtip to smear on bolt... using finger was just to much paste that why the qtip. would recommend product and will buy more when i can.

Convenient size

The opportunity for a larger jar

Put one in your kit

convenient size. easily fits in range kit, pack, etc. since it is used, normally, sparingly, it's about the right size.

nothing.

I'm rebuilding my guns and this is the right amount, rather than getting a giant can that will just rot in the garage. Works great!

Nothing

It does its job well.

nothing

Just a small amount is all you need!!!! OH and by the way,,,,, it will get on everything, usually staining it. Be careful with the MOLY because it is toxic. I used rubber gloves and a Q-tip to apply. When done wash everywhere it got to on your person. It will not come out of clothing material.

Keeping your rifles maintained with the right lube will give many years of service from your rifles.

Works as advertised. Used on a new mainspring as my original one broke in two places. (12 year old crosman g1 extreme).

Lower price with smaller amount.

Only use a very small amount on your mainspring and wear gloves as it is toxic and gets everywhere. I used a small brush to apply to mainspring.

Prompt shipping.

Awesome work and stays where you put it awesome product

You need it if you are metal to metal water awesome

Helps in accuracy, helps in decreasing lead buildup.

None

It is messy so wear disposable gloves.

Very slick and stays where you put it, a little goes a long way!

None

it seems to do what it is supposed to do. and does it well.

maybe a tube design with hard tip to help keep it neater, not get everywhere.

pretty high price for an ounce- but really, it goes a very long way.

Slippery a little dab will do.

Nothing.

Don't use very much!

adheres to surface like a magnet and very little applied spreads a long way.

more quantity for the price

use a Q tip or brush to apply.

I had to tear down a benjamin trail np2 because the piston seal blew a hole. This stuff is great I heard of people using moly grease from Wal-Mart. That is not the correct stuff. It's maybe 5 percent moly and will cause detonation. Just a little bit goes a long long way. I put some on the buttons the seal and trigger and this little container you can probably do 20 guns. Well worth it

Nothing wear nitrile gloves as moly is toxic. I also keep mine in the little bag it came In.

Use a small amount. It goes a long long way. Where gloves and know this stuff will stain everything if your not careful. Also use on your trigger only if you have experience. The Trigger might have to be adjusted to maintain it's saftey. The bb pelletier has a good blog post about it

Excellent for preserving metal-to-metal surfaces!

Nothing, this product is perfect for my needs.

As many others have said, use this stuff sparingly! It doesn't take much to do the job, which is why it's sold in such small quantities.

This stuff works really well and I little goes along way. I had to chuckle reading other reviews comparing to permatex anti-seize because that was my first thought.

Nothing

I got on "Air Venturi" web-site and asked them, how much moly was in their product. This is what Tony B. sent me. (Air Venturi) Apr 26, 13:11 EDT Hello Ronald, I've seen both 65% and 70% listed for this paste. Hope this helps.

N/A

NOW we know how much "Moly" is in this.

I used it for the mainspring and all moving parts in order to maintain all the parts from rusting. Molly grease also helps keep the spring expansion going smooth. Remember to always use gloves due to it's toxic nature and wash hands.

Nothing

Don't over due it all you need to do is put a little on your pointer finger and put a little on every coil. in the chamber and in the barrel you can put synthetic oil which will not eat up the seals.Great job on everything Pyramid air.

Product is richer in moly content than virtually any other product that I've found...use it on springs to cut friction and have some dampening effect. Some of the product will migrate to the piston for moly lubing there, as well. Beats the old Beeman treatment with Dri-Slide, and then waiting for the carrier to evaporate before use. Very useful and unique product!

Nothing