Air Venturi Scope Base, Weaver/Picatinny Reviews

just perfect on my 2240 and love it!

none

if you want to save your plastic breech and money on 2240
this is it you may put and scope or red dot.

Reasonably priced. I used one to mount a scope on a 60 year old Crosman model 113. Works quite well.

Longer than I need it but it is a simple job to cut to desired length.

Takes some careful eye-balling to get it on straight up. It is a good idea to apply some kind of no-slip coating to the inner bearing surface. This greatly reduces the chance of shifting.

Allowed me to mount a red dot sight with 20 mm base to my avanti 747. At 65 the eyes need an assist.

Reasonably this is a 10 dollar or less item. Realistically this is the only player around. It should be offered in a compact size for red dot use only. There is excessive overhanging length which detracts from the lines of the air pistol.

There is a small amount of cant when the adapter is mounted. Make sure you level the item so that you are neither leaning left nor right. It is long enough to mount a scope if that is your choice.

Very easy to install. Perfect for IZH 46M

None

This is the Mount you need for the IZH 46M using Weaver bases on the Picatinny Rail.

Works well, is solid , and is easy to install.

good as is

I bought this for my Avanti 747. Fits great. Solid mount.

Fit right on my Daisy 747,very easy to mount,would highly recommend .

easy to attach, very functional, and priced right.

It works.

Quality of machining. Once installed, the slots do not line up properly.

It's about the only adapter for the Izzy.

Easy to use. It would be best used with a red dot type sight. Good value for the money

Make the rail taller so it's easier to load pellets if you are using a two hand hold and a rifle scope. Clearance is marginal

I decided to go to a different scope base. This was ok but not what I was after

fits my Daisy 747 perfectly. mounted a red dot, works like a charm.

Maybe a groove or space down the middle so I could use iron sights without removeing the base.

Fit on my Daisy Powerline 717 almost perfect. Light weight and made of aluminum. Nice finish.

Nothing.

I cut off the "wings" since I didn't need it to be that long. See picture.

Fits a lot of pistols I own such as Crosman 1377, 1322, 2240, and Daisy Avanti 717 which lets me use a weaver scope or dot sight.

Nothing

This rail fits my Crosman 1377, 1322, & 2240. It also fits my Daisy Avanti 717. Therefore, I am able to put a scope or dot sight on with weaver fitting. It is simple to install too.

Nothing

Easy to mount and fit pistol well.

Length seems a bit exaggerated, I don't know that it needs to be as long as it is.

Very easy to fit onto pistol, and to fit scope onto the mount.

Great fit and easy to install

None

Absolutely perfect for my IZH-46, Daisy 777, and FWB-65. Simple fool proof installation.

Nothing

Works well. Easy to fit

All Good

When fitted without scope it doesn't obstruct the original sights so its easy to take off the scope and shoot normally without having to remove the rail.

This is a well made and well finished, all metal product. It fits my IZH 46M perfectly and takes Weaver rings perfectly.

Nothing

Very secure mount. I used it to mount a red dot for some pellet testing. No problems at all.

Nice, solid platform for optics

On the IZH-46M, we could use something a little shorter in length, just to improve the look of the finished product... Kinda hangs way out front on this particular pistol