Date: 3/3/2024 23:50

AirForce Scuba Tank Adapter, DIN Reviews

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose

Average Customer Review

Rating 4.54.5 (14 reviews)
2 star
1 star
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

1 of 1 people found the following review helpful:

Rating 5.05.0 5.0

Rating 5.05.0 5.0

By Doug from USA on 2015-01-07 20:29:30

Things I liked:

Small compact, fits in my shooting bag easily. After pumping using a Hill MK3 for a month, which by the way is a great little pump. The DIN AirForce Tank adapter with the gauge, which matched the 2nd Gen Marauder Gauge on PSI, is a great addition to any shooting bag. Some folks don't like the gauge position or the short hose. With my set up I simply put my Marauder on its UGT bipod 7.5" SWAT/combat version, and the 3500 PSI steel DIN valve scuba tank on it's side and we have a perfect match. By the tank being laid down I don't have to worry about it tipping over and then I can simple rotate is so the AirForce gauge is easy to read and hookem up. Fill em slow...

Things I would have changed:

not much. I like the small compact nature of the adapter and gauge and the short hose. Fits well in my shooting bag and does not take up much room. Somebody said it comes with a $100 bill folded up in the DIN opening...mine must have fell out during shipping...oh well.

What others should know:

OPEN the source valves slowly, allow all cylinders to equalize slowly. That's just good advise coming from an old retired scuba instructor who has been around High Pressure air vessels for a long time. Open slow.....and nothing will blow.......Happy shooting!

The most helpful critical review

0 of 0 people found the following review helpful:

Rating 3.03.0 3.0

Rating 3.03.0 3.0

By Robert from USA on 2021-03-08 15:25:51

Things I liked:

the air hose does move air to the airgun cylinder

Things I would have changed:

however when connecting to the DIN valve the gauge ends up on the under side of the cylinder and is unreadable.

Sort by:
Filer by:
  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Verified Purchase

    Things I liked:

    Device worked fine, gauge clearly visible. No surprises

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Verified Purchase

    Things I liked:

    Dynamics and linear design allow me to carry my 3 cu. ft. scuba accessory tank in my shooting box to fill my avenger between relays. The treading was perfectly cut, the bleed perfectly seals. and the quick connect functions securly.

    Things I would have changed:

    Nothing, it does exactly as advertised.

    What others should know:

    Be sure to get a male/male adapter when you purchase.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Verified Purchase

    Things I liked:

    Simply put - its well made and it works.

  • Rating 3.03.0 3.0

    Rating 3.03.0 3.0

    Things I liked:

    the air hose does move air to the airgun cylinder

    Things I would have changed:

    however when connecting to the DIN valve the gauge ends up on the under side of the cylinder and is unreadable.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Ease of use. Good build quality.

    Things I would have changed:

    Increase the diameter of the gauge. Allow the gauge to be turned away from tank.

    What others should know:

    This fill whip works great, just a tad difficult to see. On my valve the gauge ends up pointing towards the tank.

  • Rating 5.05.0 5.0

    Rating 4.04.0 4.0

    Things I liked:

    Exactly what I was looking for. Needed something to go from scuba tank to a Marauder. This one is a lot cheaper than the one marked for the Maruader. Works like a charm.

    Things I would have changed:

    The bleed off valve seems a little cheap, but it does work just fine.

    What others should know:

    Be sure the bleed valve is closed tightly before you start to charge the cylinder, otherwise you will blow air.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Small compact, fits in my shooting bag easily. After pumping using a Hill MK3 for a month, which by the way is a great little pump. The DIN AirForce Tank adapter with the gauge, which matched the 2nd Gen Marauder Gauge on PSI, is a great addition to any shooting bag. Some folks don't like the gauge position or the short hose. With my set up I simply put my Marauder on its UGT bipod 7.5" SWAT/combat version, and the 3500 PSI steel DIN valve scuba tank on it's side and we have a perfect match. By the tank being laid down I don't have to worry about it tipping over and then I can simple rotate is so the AirForce gauge is easy to read and hookem up. Fill em slow...

    Things I would have changed:

    not much. I like the small compact nature of the adapter and gauge and the short hose. Fits well in my shooting bag and does not take up much room. Somebody said it comes with a $100 bill folded up in the DIN opening...mine must have fell out during shipping...oh well.

    What others should know:

    OPEN the source valves slowly, allow all cylinders to equalize slowly. That's just good advise coming from an old retired scuba instructor who has been around High Pressure air vessels for a long time. Open slow.....and nothing will blow.......Happy shooting!

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Suitable for m-rod, without a hitch

    Things I would have changed:

    Increase the length of the steel hose , at least by half a foot.

    What others should know:

    Your can purchase it , if the length is increased, or else , you will easily get irritated , when ever you use them.

  • Rating 4.04.0 4.0

    Rating 4.04.0 4.0

    Things I liked:

    very easy to install to scuba tank

    Things I would have changed:

    I have a muzzle break on my Disco and the outer covering on the break has carbon fiber wrapped around it. Every time I connect or disconnect the hose, it scratches the carbon fiber. Right now I have completely worn off the carbon fiber closes to the fill port on the gun. Its a small area and you can't see it until you turn the gun upside down

    What others should know:

    Its going to scratch your muzzle break if you have one

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Works well easy to use Using on benjamin maurder

    Things I would have changed:

    Longer hose

  • Rating 5.05.0 5.0

    Rating 4.04.0 4.0

    Things I liked:

    The Airforce Scuba DIN adapter was perfect for my 3500psi Scuba tank with DIN connector. The pressure gauge is nice and large. The quick disconnect / Foster connector it comes with goes right onto my Benjamin Marauder rifle.

    Things I would have changed:

    When you screw the adapter into your tank, you can't control where the gauge winds up facing. Mine wound up facing to the side which is fine, but it would be nice if you could control where it faced after it was screwed in. Longer hose would be nice.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    very durable, easier way to fill pcp's

    Things I would have changed:

    a longer hose would be beneficial

    What others should know:

    This fills my marauder pistol and my airforce talon ss since i put an angle adapter on the tank. This is a faster and simpler way of filling the tanks using the din style scuba tanks.

  • Rating 4.04.0 4.0

    Rating 5.05.0 5.0

    Things I liked:

    Pressure gauge was dead nuts accurate. Price was very reasonable.

    Things I would have changed:

    Longer hose by about 8".

    What others should know:

    Works as advertized!

  • Rating 5.05.0 5.0

    Rating 4.04.0 4.0

    Things I liked:

    Fit right on my Bam B50. Gauge in PSI.

    Things I would have changed:

    Cant think of anything.

    What others should know:

    Fit just right on my B50. I happened to get the steel hose and it is quite flexible. Remember to fill slowly (45 seconds for 2500 psi or so). Close bleeder valve while filling then once full close scuba tank valve and open bleeder valve quickly (at least thats how the B50 check valve works). You can also empty your cylinder by openning the bleeder valve slowly with the scuba tank valve closed and your check valve will stay open and empty the cylinder.

Buy With Confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Want More?

Join Our Email List for News and Deals!

Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.