Date: 6/10/2022 12:45
0

Benjamin 300-DIN Male Adapter, Fill Reviews

Benjamin 300-DIN Male Adapter, Fill Adapter, Fits Benjamin Carbon Fiber Tanks

Average Customer Review

4.5 (13 reviews)
3 star
2 star
Pre Order

Out of Stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

5.0 5.0

5.0 5.0

By Timothy from USA on 2014-03-22 11:35:26

Things I liked:

Works perfectly with my benjamin carbon tank.

Things I would have changed:

It should probably come with the tank. I believe this is the most widely used connection.

What others should know:

You have to have some sort of fill nozzle to fill your tank. You need to check your fill station before hand to see what type of connection you will need...

The most helpful critical review

0 of 0 people found the following review helpful:

1.0 1.0

1.0 1.0

By Greg from USA on 2014-08-15 12:33:06

Things I liked:

nothing i can think of, does not work with my Benjamin tank

Sort by:
Filer by:
  • 4.0 4.0

    3.0 3.0

    Verified Purchase

    Things I liked:

    this adapter fit and worked as stated, easy to install and simple to workin

    Things I would have changed:

    include an 90 deg. elbow to prevent connection problems that come and go

    What others should know:

    always keep a spare stached away

  • 5.0 5.0

    4.0 4.0

    Verified Purchase

    Things I liked:

    It works at adapting the Air Venturi compressor to our DIN valve on our tanks.

    Things I would have changed:

    Provide a better plastic sleeve to protect the threads. The one sent doesn't work.

    What others should know:

    Too expensive.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    I needed this to fill my BenJi Carbon fiber tank. I had only one problem. When fiiling the tank the adapter was leaking a little and tightening it didn't do anything. So I let it leak a little and filled my tank to 4500PSI with a extra 4 mins time. Once the tank was full I pulled it apart with two wrenches. Now they make 3 teflon thread tape. One is white and one is dark gray. The difference is the dark gray is thicker and use on this adapter. Which one or two wraps is fine. Using the white teflon tape maybe 3-4 wraps. The third I don't talk about is used for LP Gas. So White is .97 cents and dark gray 2.00$ home depot. My adapter was 100% as pictured. As for the leak it wasn't a big deal to bring to anyone's attention.

    Things I would have changed:

    I would test if leaks before shipping. Very simple, As some people could be clueless what to do. All in all worth the money and works as it say's. I may just change the foster valve with a one way foster valve. This valve just a standard. This way the foster valve you just wouldn't have to close the tank and just let the pressure release from the tanks bleed valve or the compressor. But all in all once you remove the adapter you better close the tanks valve first

    What others should know:

    But this is for your Benji tank and you own your compressor it's great. Scuba shops your lucky up to 3600-3800PSI on a good day and when tank cools your pressure drop 200PSI...And where i'm at paint ball shops open only Saturday and Sunday. And they charge for each 1000PSI.

  • 5.0 5.0

    3.0 3.0

    Things I liked:

    works great with pistol air tanks

    Things I would have changed:

    should have better protective sleeves on unit

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Works great

    Things I would have changed:

    Would be nice if it was shorter be still good

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    No pressure loss, easy to affix to my "buddy bottle" and accomodates the "marriage" between my Benjamin Buddy Bottle to my Omega Super Charger well, (Omega Super Charger is from Airguns of Arizona).

    Things I would have changed:

    Nothing, it works great.

    What others should know:

    The "Foster Fitting" is steel, not stainless steel, but I have no problems with it. I keep it lubricated with lithium spray and find it doesn't rust. Fits well with all my charging hoses.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    can now fill small scuba bottles from ben pump and transfer from my 80 cf scuba tank to my 6 cf pony bottle super and a must have

    Things I would have changed:

    not a thing

    What others should know:

    to check pressure in your 3000# scuba tank connect benjerman pump then pump up to to 3200 psi (5 to 8 pumps ) and gentle open scuba tank and watch pressure gauge on pump what it falls to is pressure in your tank close tank and bled off hose pressure and disconnect

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    It makes changing from filling my tank to charging up my guns easy.

    Things I would have changed:

    The unit that I received did not have a finger knob as shown.

    What others should know:

    Very handy you will like it.

  • 5.0 5.0

    3.0 3.0

    Things I liked:

    works great to adapt the din hole on my hand pump to work with the Air Venturi hose to fill my synrod. Threads on the adapter cut nicely, screws in smooth by hand.

    Things I would have changed:

    maybe make this from stainless steel. I think for the price of this that should be do-able.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    well made

    Things I would have changed:

    nothing

    What others should know:

    when I bought my tank I did not know you had to buy one of these as well... Nobody could fill my tank...

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    nothing i can think of, does not work with my Benjamin tank

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    I DIDNT LIKE LEAVING MY HOSE ON MY TANK ALL THE TIME BECAUSE I THOUGHT IT MAY GET DAMAGED. THIS FIXED THAT PROBLEM.

    Things I would have changed:

    A LITTLE BIT EXPENSIVE. MAYBE A STAINLES NIPPLE

    What others should know:

    IT SCREWED INTO MY BEJI TANK KIND OF HARD BUT I DONT TAKE IT OFF SO I GUESS ITS OK

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Works perfectly with my benjamin carbon tank.

    Things I would have changed:

    It should probably come with the tank. I believe this is the most widely used connection.

    What others should know:

    You have to have some sort of fill nozzle to fill your tank. You need to check your fill station before hand to see what type of connection you will need...

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.