Birchwood Casey Portable Shooting Range Reviews

This target system is well built....I use self stick targets on a cardboard background.

Maybe make it a little taller..

But two..When you have two or more people shooting...Extra targets are nice to have.

Steel frame target holder is the best for pellet airguns I have found for outdoors. Versatile, strong and holds a cardboard target backer in place.

I ordered this for the frame.

Shipping container is smaller than the target. Thus the target edge is bent to fit in a 14" box when the target is 16''.

Just the stickers

Get those metal pieces to be re soldered. As soon you move it a bit it detach .

I wouldn't buy it
1st too expensive

Good design.

Stronger welds. The weld broke on one of the arms the first time I tried to insert a target. The rod appears to be pot metal so I don't know if it can be welded again or not.

**Just the kind of target I needed.I give this item two stars.**

Once I received the product the arm snapped off while trying to assemble it. I would have been better off using the cardboard box I received it in.

Easy to assemble and move to different locations quickly to train for HFTT

I would like to see one made about 12" taller for level zeroing

nothing

Sturdy. Inexpensive. Included Shoot-N-C targets.

Fitting the backboard in between two clamped metal pegs is awkward and extremely tight.

the targets

The Height,entirely to low needs additional length of rods for the frame. the material used as a back stop behind for targets and the way to mount the back stop. I had to get a screwdriver to open the holder to insert the backstop which had a great deal of difficulty going to it;s final rest spot.

Buy something better!! This will never hold up to shot guns or bullets .It barely holds up to BB"s which are shot with a co2 charge at 25 feet. Don't waste your money!!!

Size and overall design.

Backing not heavy enough to stop even 300-400fps loads, but good value for price and portability.

Use additional backing material to stop or collect fired rounds.

Quick and easy to set up, just push into ground with foot and place back stop in place, stick your targets on and shoot.

Nada

N/A

Cheap, The metal is durable but not the plastic really. I put about 100 holes in it with .177 and most of them are concentrated towards the center and the plastic in the center is already chipping away and falling apart. Ill just duct tape the whole plastic board.

Nothing, very simple design and lots of fun for a cheap backyard shooting range.

I wouldnt use a shotgun on any kind of firearm unless a .22 or .223 smaller rounds you can put more holes in it before the whole piece of plastic becomes garbage. im sure a few shotgun shells would tear it up pretty quickly.

The target system is great

would make a back board that BBs would stick to, instead of going through.

the size is nice. easy to use. price was right.

nothing

Easy to setup and move anytime you need to. Targets stick on and then come off just as easy!

I would make it taller.

Portability.

Weld them better. Better QC when made.

The vertical rods on the one I got were smooshed together and when I pulled them apart to put the whiteboard in the welds broke. Not to stoked that it broke before first us but not worth the time to send back. Duct tape fixed it. I'll make my own before I buy another one.

Works quite well. Easy, quick setup.

nothing

I use cardboard from cut down boxes after the backing that comes with holder gets all shot up.
The 2 bars that hold the backer are too close together. You may have to spread them some. Broke mine trying to do so, but I have a welder to fix things.
A screw driver may work better to spread than trying to do it by hand.

Weather proof and very tough plastic backing board, heavy metal construction, simple, works

Could be a bit higher. The metal frame must be pried apart to insert the backing, it's ridiculously tight. Wish they had a smaller version, I need about 4 or them.

This thing has absorbed hundreds of .22 airgun rounds, about 500 so far. I'd guess it's good for another 500 before it starts to fail... not bad.
The steel is heavy duty and it's easy to step on it to push it into the ground. Nice overall. Also, it's large, I put 2 eight and a half by eleven inch paper printed targets side by side on it.
Comes with a bunch of stick on targets.

metal is good quality. should last a long time.

needs to be higher. at least make one this quality that is adjustable.

just your basic target holder. works well. made to last.

Portability and ruggedness. Cardboard is free and targets are cheap.

Nothing, maybe add some more targets?