Page 7 - Crosman 1399 Custom Shoulder Stock Reviews

It makes the pistol into a carbine style airgun which made my 1322 more accurate for me to shoot. The peep sight works great with this configuration.

I had to use small washers to make the stock fit tighter(4 stars) but after that slight modification it is great.

Easy to install,fit perfectly,good value for money.Made the 1377 much more fun to shoot and increased the accuracy.Always have good service from Pyramid.

Nothing

It's almost a have to have.

Same fit and finish that I had expected based on a prior use of one I mounted on a previous model in .22 caliber.

I would like to have the factory produce a stock to match the brown finish option that would match the brown pump handle. I did use some black Krylon fusion paint. For plastics to paint t.he fore end to match.

.

Works well with my 2240.

Slightly longer length of pull. Only 2 screws hold it on so there is slight movement, but it is hardly noticeable and inherent in the design.

I like it, it helps accuracy. Now for more customization on the 2240.

Makes the pistol very accurate . A steady hold is possible . And the new size of the piece isn't a problem

Nothing

Takes two minutes to install

This 1399 stock gives my 1377 and 1322 a nice carbine feel. It also helps with accuracy at longer distances.

Not much

If you have more than one 1377/1322's you should buy one, that way you could keep it on one and still have a pistol to plink with.

Just received my stock today. In less then 5 minutes I was in the backyard shooting. Still have stock sights on my PC77B and at 30 feet had a 1 1/2" group with 5 shots. Added a cheap scope and after zeroing it in had 3/4" group in 4 shots standing unsupported. At 70 am very pleased. Wish I could have had a group like that when I was 20.

Nothing.

This is a great investment.

Light weight, easy to use

The tolerances of the inside of the grip are a little much...

The grip rocks back and forth ever so slightly which is just enough to be annoying. I just made a small paper shim to go in the bottom and that worked fine.

perfect accessory for the 2240.

nothing

does wonders for steadying your shots.

good stuff makes the pistol behave

quick mount would be nice

worth the money

very nice, fits perfect

nothing fine the way it is

Installs easily, improves accuracy, looks good, and durable.

Maybe add some shim material. Leaves a slight bit of play easily remedied. I put some electrical tape around the frame before sliding on the stock. Trimmed off excess with utility knife, cannot notice the tape and snugged up the fit perfectly with no play.

Works great with the reversible peep sight on the guns with that feature (1377/1322/2240).

Fits easily onto pistol, makes pumping the pistol easier, and feels good when aiming too.

Nothing.

Nice modification to the PC77.

The ease of instalation. The looks. Very well made.

Nothing

Really helps steady the pistol. The day I received it, it was nice out and I used up a couple CO2 capsules. All shots were around the bulls eye at thirty feet. Lots of fun. To bad these aren't legal for cartridge pistols.

Bought two of these for my kids pistols. They just spent the past three hours out back shooting and are very happy with the results; definitely adds the extra stability needed to make a nice increase in accuracy; absolutely great upgrade.

Lack of ergonomics built into the grip like the original plastic grips seems to be their only complaint thus far.

A must have for the 1377/22 series of pistols! Turns them into a most handy carbine with hardly any additional weight. Also, it's easier to pump and aim with this stock.

Possibly a more secure way to mount it than just using the two grips screws. After pumping it up several times you need to re-tighten the screws as they will loosen slightly. Not a big deal but it does happen.

Nothing I can think of except like I mentioned earlier it really is a "must have" for these pistols.

Exactly as representsd and received in very timley manner

None

Fits perfect

Good quality and good feating

no

Made my 1322 even more of a tack driver..Changed the whole feel of the gun...strong..

maybe a few more inches longer,but still has a great feel.

I read about it wobbling,but mine didnt do that..it fits nice.

fits great on the 1377 pistol turning it into a carbine

perhaps an updated design so a proper eye level cheek weld can be achieved

for my 1377 pistol to carbine conversion, i needed to add an sks cheek piece to raise my eye for a better cheek weld