Hawke Match 1" Rings, High Reviews

So far so good. Scope is mounted on a TX200. Medium rings weren't tall enough for Airmax 4x12x40 scope so 1" high rings were used. Haven't had a chance to shoot my new gun as much as I'd like, but scope is holding. Good price.

Nothing at this time.

With the Airmax 4x12x40 scope you will need the 1" high Hawke scope rings if your mounting on a TX200. The medium Hawke rings are too short.

The high rings are perfect for my Airforce Condor. Good quality rings.

Nothing

they are the best rings for hawke scopes,fit is tight your will not move with these rings.

nothing.

you get what pay for. i have many cheap rings all are in spare parts box.

These rings are the best I ever used. The updated gel holds scope beyond expansions. Quality is awsome.

Nothing

They are way worth the money.

Looks good and holds the scope

Solid scope does not move

Nothing

If you want a set of rings that will work and are solid buy these they will not move worth every penny

the non-metallic inserts on the inside of upper and lower rings do not slide with the mounted scope in place. some of the cheaper mounts will allow the inserts to slide with the scope under heavy recoil as in rws 350 mag.

nothing

they must be epoxied; super glue, contact cement or other glues probably don't cut it

I needed a high ring set to provide a better fit between my cheek and a rifle with unusually high comb. This Hawke set did the job. Other Hawke products I have purchased in the past were good quality, as is this set. The double screws on the side of each ring should provide extra grip compared to just a single screw. The cushion material pre-installed inside the rings is a good feature. It protects the scope from scratches and also provides extra grip to hold the scope in place.

Nothing

Installation on my air rifle with 11mm rails was straightforward. The pin stop is screwed into place once the ring bottom is mounted. This system is easier to install than systems that require you to tap the pin stop. However, the tip of the pin stop is tapered, so it may not provide as much contact point in the hole in your rifle compared to pin stops which are tapped into place. So far, the scope has not moved after about 100 shots through my Walther LGV springer.

Excellent along with Hawke scope

Nothing

Hawke quality. Good price. Matches Hawke 2x7 scope perfectly. I like the height. Fit my Sumatra 2500 perfect.

I know low is better. But my neck is a mess and the less i have to cock my neck to the side the better. If youve a bad neck, take this into consideration if you do alot of extended shooting times. 2 or 3 hours of having my neck cocked sideways bending over is painful and takes the enjoyment of of my hobby. High mounts help. These are sturdy and high quality also

High quality product & well designed.

Spending more on scope mounts up front eliminates problems that may show up later.

I didt like anything about these scope rings.

Quality control the clamp for the dovetail was miss stamped and threw the screw whole off. It was of 1.5 mill redrilled and works great.

Don't expect the same quality as the Hawke scopes
QC is very low and they do not have tape either.

Erika was awesome,she helped me get the discount code that I forgot to enter,without having to cancel my order and reorder..fast shipping and great rings too!

easy open packaging, well made

include evelavation inserts...

buy it... you won't go wrong

Traditional design allows good clamping force. Centered well on rail with very little offset from either side. Traction tape in rings holds well. Greater section modulus and increased rigidity compared to similar BKL rings with more efficient translation of stud torque to rail clamping force.

Cut price in half and add horizontal adjustmet.

Holds well for those looking for a rugged mount and centering seems decent. The traction tape eliminates metal to metal contact between scope and rings which may be a precision concern for match shooters. But they are a rugged design and fit well for field air rifles.

Works great, easy to setup, gives you the right amount of room you need. Good price to.

Nothing

Quality and lining material to prevent any scope damage and eliminate scope ring slip.

None

Easy to mount, easy to use. Holds scope very nicely as they should.

Excellent fit and finish. Rock solid stability.

Nothing.

The high mounts work great on the Benjamin Discovery when using a 40 or 50 mm objective scope without removing the iron sights.

They work. No much else can be said about a scope ring.

nothing