Date: 16/8/2022 14:43
0

Hawke Sport Optics 2-Pc Adapter Reviews

Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail

Average Customer Review

4.5 (24 reviews)
3 star
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

5.0 5.0

5.0 5.0

By SqueezeBox from USA on 2013-07-28 09:58:55

Things I liked:

This mount is solid and well made. It fits the existing 11mm dovetail very closely.....and the adapter is low.

Things I would have changed:

Nothing

The most helpful critical review

0 of 0 people found the following review helpful:

1.0 1.0

1.0 1.0

By Gregory from Canada on 2015-08-07 06:26:15

Things I liked:

I like the idea of mounting my Weaver rail sight on my air rifle, if it fit properly.

Things I would have changed:

I would have made the dovetails easier to attach...each adapter could have two pieces so attaching it is as simple as loosening an Allen key, fit it to the dovetail on your rifle then tighten the Allen key...just like the mounts that came with my center point 4x32mm scope.

What others should know:

Ask questions before you buy.

Sort by:
Filer by:
  • 12 Next
  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    This is the only mount I have found to work on my HW45 (P1) because of the extremely wide rail. I took one of these, took the screws out, worked it back and fourth to split (break) it down the middle. Then I took each half and along the center edge where it broke and rubbed the across a file to remove some of the metal so they fit together closer. Put each half on the rail and put the screws back in and tighten, then your rail sight will slide right on. Because it's two pieces now you can remove the sight easily without damage to the rail of of the gun. I know it sounds crazy but it really works and is an extremly low mount and doesn't take away the aesthetics of the gun.

    What others should know:

    I've tried almost every mount on my HW45 and this is the only one that worked. Some will go on it but way off center. This is the perfect solution.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    I think this is one of the better adapters to go from 11mm to picatiny rail connection for scope mounting

    Things I would have changed:

    There is a problem with the screw head sockets. The Allen wrench supplied doesnt fit in the hex socket of the screw. I think its the screw that has the problem. I had to replace the screws to make them work.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Everything

    Things I would have changed:

    Nothing

    What others should know:

    Good tight fit. Really low best way to change to weaver rail.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Snug. Lowest profile adapters*

    Things I would have changed:

    Nothing.

    What others should know:

    Fit nice and tight.

  • 4.0 4.0

    3.0 3.0

    Things I liked:

    AS I attempted to attach a red dot to my 1950's Sheridan, these mounts wount not tighten against the crossman 3/8" intermount, I had to saw through to seperate the top parts to allow space for closure/compression. After carefully cutting and finish filing, it was successfully installed.

    Things I would have changed:

    Include alternate instructions.

    What others should know:

    Be prepared to inspect and MODIFY for your purpose. Difficult to find anything else that will suit my needs. Now my sheridan will aid my aging eyes.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    I like these adapters. I have many sets of weaver / pic. rings for my powderburning rifles. I gave easily swap scopes with these. hey are low profile and sturdy. Good price.

    Things I would have changed:

    I like them, nothing to change.

    What others should know:

    Nice, low profile adapter.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Good Quality.

    Things I would have changed:

    Nothing.

    What others should know:

    Works as advertised.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Excellent piece of equipment used it for my bipod Works fabulous I also like the fact that they are 2 one piece mounts and fit firmly in place

    Things I would have changed:

    Nothing

    What others should know:

    Would not recommend using these if you have a Springer

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Awesome, works exactly as expected. Allows you to mount the scope very close to the barrel.

    Things I would have changed:

    nothing.

    What others should know:

    Works as advertised.

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    I like the idea of mounting my Weaver rail sight on my air rifle, if it fit properly.

    Things I would have changed:

    I would have made the dovetails easier to attach...each adapter could have two pieces so attaching it is as simple as loosening an Allen key, fit it to the dovetail on your rifle then tighten the Allen key...just like the mounts that came with my center point 4x32mm scope.

    What others should know:

    Ask questions before you buy.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Very well made, high quality.

    Things I would have changed:

    Nothing.

    What others should know:

    Have tried other adapters, but these work the best. I use on my Air force Condor to mount bi-pod and vertical grip. Very strong gripping ability. Worth every penny.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Low profile... Well made.

    Things I would have changed:

    Nothing.

    What others should know:

    The lowest profile in this kind of converter I have found

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Well made. Low profile adds just the right amount of height for a 32mm scope on my Woods Walker Pistol.

    Things I would have changed:

    Nothing

    What others should know:

    I initially thought I might have a problem getting the screws tight enough, but it was not a problem

  • 5.0 5.0

    4.0 4.0

    Things I liked:

    They work and are solid.

    Things I would have changed:

    Expensive for what they are.

    What others should know:

    My use is on a pcp and a 22lr

  • 5.0 5.0

    4.0 4.0

    Things I liked:

    Very good product.

    Things I would have changed:

    Nothing

    What others should know:

    Works very well with the UltraDOT PAN/AV red dot.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Very solid fit and my scope does not move.

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    They seem sturdy.

    Things I would have changed:

    Make them flex a little so you can slip them over a dovetail rail, and then tighten them up.

    What others should know:

    I bought them for my Beeman P3. You can't slide them onto its rail because there's no entry point for that, and you can't snap them into place over the P3 rail. They don't fit on my TX200 dovetail rail either. I don't know if they can be pried, so that they can be made useful.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    The two parts need to be spaced apart appropriately such, that is to fit your mounted weaver device! Meaning the groove in the middle of each adapter needs to sometimes fit the thing your mounting.

    Things I would have changed:

    Not a thing its very low/flat by default! In my use, it will not budge cause my air gun has zero kick e.g. multi-pump 2289.

    What others should know:

    I'm using this on Crosman steel breech on a 2289. E.g. Now I'm a weaver regular that's true. I have since then put a blue illuminated mil-dot scope, a red/green dot from here on that a flashlight/green laser combo on the side, and pressure green laser on the side.

  • 4.0 4.0

    5.0 5.0

    Things I liked:

    Fit a RWS 34, 36 and my 350 MAG as they should, with the 11mm rail. These work quit well on 22cal. rifles with a 11mm dove tail. Probably works great on any gun with the 11mm dovetail.

    Things I would have changed:

    Nothing. In the description I would make type bold and "quoted" stating not recommended for guns with a lot of barrel droop.

    What others should know:

    These were ordered for my 350 MAG. But the amount of barrel droop would not let me compensate for that. So Do not buy these if your barrel has a lot of droop. Buy the barrel droop compensator mount for an 11mm dove tail to the Weaver mount. Works GREAT had scope sited in in just a couple dozen shots shots. With any scope mount BE SURE to use (Blue Loctite) on all cap screws when mounting scope.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    Nice and compact. Using for auxiliary mount.

    Things I would have changed:

    Nothing

  • 12 Next

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.