Date: 9/8/2022 6:53
0

Leapers Accushot 1-Pc Mount w/1" Reviews

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail

Average Customer Review

5.0 (147 reviews)
2 star
1 star
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

2 of 2 people found the following review helpful:

5.0 5.0

5.0 5.0

By Anthony from USA on 2008-08-04 06:52:00

Things I liked:

Holds tight and affordable.

Things I would have changed:

Nothing.

What others should know:

Fits 11mm rails.

The most helpful critical review

0 of 0 people found the following review helpful:

3.0 3.0

3.0 3.0

By Weslee from USA on 2008-05-23 09:31:58

Things I liked:

I liked the tape inside the rings

Things I would have changed:

This thing needs a stronger scope stop for high recoil guns

What others should know:

This comes with 2 scope stops..the gun I installed it on was a Daisy 1000s and it completely sheared both stops right off, making the mount ineffective. I now have a Remington Summit that comes with a single piece mount and I have no complaints with it whatsoever. The stop pin on it is much thicker and is sharpened to a point, giving it extra sturdiness, unlike the thin and brittle pin like this one.

Sort by:
Filer by:
  • 123 ... 78 Next
  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Easy to install. Stays in place

    Things I would have changed:

    Nothing

    What others should know:

    Recommended

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    This is a nice solid mount meant to take some serious recoil.! In fact, It's capable of withstanding a lot more recoil than my condor SS will dish out! but it looks good & the condors dovetail rail could use the extra stiffness the mount provides. Only complaint is the tape in the bottom of the rings... If there is a squeeze factor to the tape, the scope is not going to hold zero.. That doesn't take away from the quality though! and I've seen more expensive sets use the tape as well.

    Things I would have changed:

    Just do away with the tape!

    What others should know:

    This mount will work with scopes that have less mounting space & is a very good value/choice IMO.

  • 5.0 5.0

    5.0 5.0

    Verified Purchase

    Things I liked:

    Many have know frustration as there scoped air gun fails to hold a zero after sighting in. This scope mount was reccomended by the air gun experts at Pyramid... Once again they nailed it! This mount and ring set up doesn't move after 2 weeks of range work and well over 200 pellets sent downrange it has held zero!! If your having issues this is the answer you need.

    Things I would have changed:

    Hey... If it ain't broke, don't fix it!

  • 5.0 5.0

    4.0 4.0

    Verified Purchase

    Things I liked:

    Does its job

    Things I would have changed:

    Nothing

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Mounts securely to my rifle and I feel like the one piece construction will be less likely to allow any movement of scope from being bumped around.

    Things I would have changed:

    Nothing, it works perfectly.

    What others should know:

    Thanks for the support persons help in finding the scope mounting that I needed.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    A good, solid mount for not a lot of money. I have never had any issues with these mounts like I have had with 2 piece mounts. Worth every penny.

    Things I would have changed:

    Nothing

    What others should know:

    I would not hesitate to buy this mount for any of my air guns.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    price was rite size was OK? It fit perfectly on my new HW97 k scope hasnt moved one iota

    Things I would have changed:

    Make the base an inch longer for a little more eye relief [space between rings ] then add one more base screw ha ha then it would be an rws.mount

    What others should know:

    scope stop pin is pointed take it out and file it flat or risk putting a hole in your reciever

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Grips the scope well. Priced well. Grips the rail well. Stop pin works well.

    Things I would have changed:

    Make it with a built in 10 or 20 MOA compensation.

    What others should know:

    Lower profile than RWS one piece mount. 4 bolts per scope strap as opposed to 2 on the RWS mount.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Excellent mount.Solid.I have several of these.

    Things I would have changed:

    Nothing

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    The price! This is roughly 10x's cheaper than any major brand name scope mount and it absolutely does its job. I picked one up for my Mendoza M12 that has no iron sights. The low profile gives a great barrel's eye view of the range ahead and is seemingly so much easier to zero with less parallax involved. It hasn't moved since I torqued it down. Solid, well built, two screws on either side of each ring give very positive grip for the scope. I have two other rifles and the scopes shift constantly as a result of their kick. Not this thing. Nope. Solid AF. The inclusion of extra hardware and the droop adjustment screw for the rear ring are essential. Nice touch!

    Things I would have changed:

    Nothing!

    What others should know:

    Buy it!

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Can't go wrong with this mount for the price. Hold steady on my Gamo Socom Extreem. This rifle puts out 30fp in cal 22. I also have one on my Hatsan 135 .22 springer which is a beast.

    Things I would have changed:

    Nothing

    What others should know:

    Great all around mount.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    works great

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    sure stops mount creep with lock screw.Have a ruger air mag. in 22 cal. Very accurate and hard hitting.so much recoil,it would continually slide the mount back,but with this Leapers Accushot 1-Pc mount, it locks on secure,no problem.

    Things I would have changed:

    Nothing

    What others should know:

    Get one

  • 4.0 4.0

    5.0 5.0

    Things I liked:

    Nice one piece mount very sturdy and has a much needed stop pin. Great price point!

    Things I would have changed:

    Have the bolts that tighten it up to the barrel flush with the mount and I had to work on the stop pin to get it in the machined hole in the gun so I guess it needs to be better drilled for alignment.

    What others should know:

    First one I received I had to return because one of the scope mount holes was drilled and tapped at such an angle I could not mount the scope however Pyramyd Air made things right!

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Outstanding mount! Looks really nice and is super strong with super clamping force on the rail.

    Things I would have changed:

    Nothing.

    What others should know:

    Be sure you consider the height. For example this medium is ideal for most things imo, and I much prefer the lower stance over a high mount. So far I have not needed a high for any gun, but I limit my scopes to 40AO and 44. Example; I have a generic 3-9x40AO Centerpoint (bundled with Crosman/Benjamin guns) that I just measured and the largest part of the obj housing is 2.1", and the cap brings it to ~2.3. Mounted on a generic Crosman break barrel (Titan), with no shims, the dust cap is tight on the receiver so it needs maybe .010" sanded off at that spot. Without the cap there's .060" clearance which is plenty for (most) shimming needs. The cap can be sanded all the way thru if needed so the same clearance would apply. Fyi; scopes, guns and mounts can vary with mfg changes over time etc., but at least you have some info to go on.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    solid mount

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Really solid mount. Works great.

    Things I would have changed:

    Nothing

    What others should know:

    I bought this to go on my Gamo Bone Collector just for the one piece look. The stock mounts where working fine. One thing Gamo owners will need to know with this mounts is. When using with the new shock adsorbing scope mount, you will need to trim the bottom rear of the mount back about 1/4''. This mount will hang over the seam in the scope base and catch the rear shock absorbing part of the base. Which will defeat the purpose of have the shock adsorbing base. Those that have Gamo's with the new scope base will know what I mean. Just a little 1/4" trim on the teeth of the mount that pinch the rail is all that is needed so they don't grab the rear part of the mount.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Quality product, well made, not too heavy, does the job

    Things I would have changed:

    Nothing to correct, just what I expected

    What others should know:

    I'm using this on a Marlin .22. It fits well, allows proper eye relief, and most importantly prevents scope creep caused by recoil.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Seem to be a good, solid way of mounting scope to a dovetail.

    Things I would have changed:

    Nothing

    What others should know:

    Am using with an UTG 3-9x32 AO on Crosman TR77 NPS. Perfect positioning and no evidence of shifting, even without Locktite.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Very strong mount. Nice finish.

    Things I would have changed:

    It could be about a little bit longer.

  • 123 ... 78 Next

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.