Page 2 - Leapers Accushot 1" Rings, Medium Reviews

double bolt ,price

nothing

Great price....works as billed....when paired with the right scope it keep it low on the gun.

Nothing....

I bought them for a 40mm objective lens scope that is max for medium rings.

These are my go rings. I keep several pairs of the medium and high in stock for use when I get a new gun. They stay where they are supposed to.

nothing

These aren't expensive so keep some of the medium and high for spares.

Very easy to set up and use.

Use counter sunk fasteners for a smoother less colthing catching setup

Snug the fasteners only

Outstanding mount! Looks really nice and is super strong with super clamping force on the rail.

Nothing.

Be sure you consider the height. For example this medium is ideal for most things imo, and I much prefer the lower stance over a high mount. So far I have not needed a high for any gun, but I limit my scopes to 40AO and 44.
Example; I have a generic 3-9x40AO Centerpoint (bundled with Crosman/Benjamin guns) that I just measured and the largest part of the obj housing is 2.1", and the cap brings it to ~2.3. Mounted on a generic Crosman break barrel (Titan), with no shims, the dust cap is tight on the receiver so it needs maybe .010" sanded off at that spot. Without the cap there's .060" clearance which is plenty for (most) shimming needs. The cap can be sanded all the way thru if needed so the same clearance would apply. Fyi; scopes, guns and mounts can vary with mfg changes over time etc., but at least you have some info to go on.
If by chance you need extra super clamping force then consider the one-piece version Leapers Accushot 1-Pc Mount w/1"... because you can drill/tap to add two more screws.

They are made very well.

These rings are very well made. Excellent quality.

I would not change a thing about these rings but in the description of the rings, I would like to see the height listed.

Just make sure you are ordering the correct height rings for your application.

Great rings, mounts easy and holds well, good price to.

Nothing

work as expected. no issues.

nothing.

can't go wrong with these scope rings.

Well made, good service from Pyramyd Air

Should have ordered the high mount but that is MY bad.

They look fine and stay on the dovetail.

Nothing

These seem to work fine on a TX 200. Replaced a set of BKL mounts that would not hold. These have a scope stop that works. They also cost about a 1/3 of the BKL mounts. If you have a springer you will need mounts with a scope stop. These will do the job. I mounted a 3X9 40mm Nikon scope and these mounts are high enough for the objective to clear the top of the gun. If you have a 50mm scope you will probably need the high mounts A 50mm scope might fit but the front lens cap may not clear the top of the gun..

Perfect rings for my Hatsan 95! And I went through a bunch.

Nothing!

Solved my scope problem. Great bang for the buck!

Best rings I've found

Nothing

These are great rings guys. Great for most 32mm & 40mm

Ruggedly solid, excellent value. These rings, in conjunction with the proper base, has eliminated scope movement on my RWS Model 48 .22 rifle.

Nothing

I purchased an RWS model 48 in .22 caliber over a year ago based on solid reviews for accuracy. The rifle would shoot well for a time and then the point of impact would shift, usually at a critical juncture. I now, realize this was entirely due to operator error and was no fault of the weapon or the scope. I had chosen cheap rings and bases, not understanding that a powerful springer air rifle generates recoil sufficient to shift set ups that work on less powerful models. I contacted the folks at Pyramyd Air for their suggestion and, problem solved. After well over 500 pellets, the scope has maintained its zero.

Well made, rock solid.

none

Nicely made, very solid mounting, reasonable price.

Nothing.

I used these to mount a "BugBuster" scope on my Crosman 1701 Silhouette pistol. The scope clears the gun easily and allows good access to the pellet-loading port.

I got these mounts for my BSA 2x20 Pistol scope intended for my Browning 800 .22 but they failed within a very few shots on this pistol. Think for the price they are good mounts just not for the high recoil of the magnum guns.

The Browning 800 destroyed these mounts within 20 shots. Rated these 3 star only because they did not hold up on this pistol.

Light weight yet sturdy. Handles magnum springer recoil with out slipping.

Nothing

Clean mounting surfaces are paramount.
Make sure that your receiver grooves and scope tube have been degreased.

I like the 2 screw system on these rings.On the dovetail and the tube (each side) ,They stay where you put them .You can buy ones, that cost more ,But why in the world would you.

Nothing

What kind of a mind could think of something like this.Brilliant! ,When I first saw this clip ,I said, what kind of a rig is this ,but then I used it ,and I said this could not be more prefect.

I went on You Tube and found how to make the spring stronger. A 10 year can do it.And I am glad I did .It might not even needed it ,but I like it.I read on the reviews that it needed to be stronger,so I just went ahead and done it.

Buy at least 2 (two) clips ,well a total of 2 the rifle comes with one. I shoot 16 times and refill ,air and pellets, it works out great. Man you are going to love this Equipment!!!!!!!!!