Page 6 - Leapers Accushot 1" Rings, Medium Reviews

I like the value. They're well machined mounting rings, what else is there to say?

nada

You can't go wrong with these, even on a springer.

Does what it is suppose to do with out any trouble.

nothing

The price is not bad but not great either.

simple, I especially liked the 2 screw base and the 4 cap screws. After shimming the rear base and optic-centering the scope the tx 200 was shooting within 2" of bull without adjusting the scope at 50'.

I would like for the set screw vertical pin to be a little larger to better fit the 3 holes in the top of the receiver of the tx 200.

Get the right mount for your gun. I like the scope to set about 1/8" above the barrel. Pyramyd Air was excellent in helping me selecting all my things.

Very well made rings. I put these on my Ruger Air hawk Elite since the stock rings were not good enough to hold the scope scurely. I still use locktite to hold the srews tight but make sure you use blue locktite so you can get them out if need be.

Nothing that I can think of.

Theses are quality rings. If your air gun has a dovetail scope mount these are the scope rings to get. They are inexpensive and excellent quality.

Very good quality. Two bolts on top

Well made,good fit

Not a thing

Everything..

Nothing..

It also works great on .22 cal rim fire, which is what I used these rings for.

Great quality for the money

everything

nothing

Why pay more these rings do the job at a great price

can't belive they only cost $9.99, suitible for any gun,even give extra screws and the allen head wrenchs with the kit

nothing

Great rings at any price. Thanks for the recomendation. Good fit and finish. Very secure, but use Locktite and don't feel you have to torque the heck out of them. Make sure you get the correct height. Extra screws are included.

Nothing.

Easy to mount, very good grip, best value

Nothing

No problem with installation or performance and the price is certainly reasonable.

Nothing.

I've been wanting a scope on my old Crosman rifle for several years but couldn't find the hardware for mounting the 1" diam. rifle sight that I already had. These rings along with the Crosman dovetailed intermounts solved the problem very nicely. Many thanks to Pyramyd for their support.

very solidly built rings. no slippage or poi changing every time you go to the range or hunting. set it and leave it alone.

nothing

Great rings. Clamps have a nice sharp angle, really holds my scopes well, even on shallow grooves. For < $10? What's not to like?

Not a thing.

Strong and inexpensive. Great product. Saddle height (above tube) is 0.625 inches. Mounts are 0.830 inches thick (front to back). Comes with Allen keys and extra screws.

Very low cost

The claws used to grip the dovetail on the base are too thick. The caused the rings to tilt to the side when mounted on my rifle. The claws seem to be made from a casting, perhaps a sheet metal part with a sharp edge would have been a better design choice.

These double wide rings are of the type used by "tactical" rifle shooters to grip their scopes more tightly. 3/8 inch dovetails are normally found on rimfire rifles that don't have a recoil problem. For this purpose, you are better off buying the single wide types which allow more room for fore and aft adjustment along the rail.

Good rings. Held solidly and are easy to install.

Pink would be nice for the ladies versions.

Watch the scope mounting video in the articles section.

The price and quality of these rings is outstanding!

Not a thing...

Don't let the price fool you, these are solid rings.

I have three scoped air rifles & they all have Leapers rings or one piece mounts. You won't find a better product @ even twice the price.

Not a thing.

Solid as a rock.

Very strong and they look great on the rifle.

Nothing