RWS Lock Down 1-Pc Mount Reviews

super strong mount even with only 4 scope screws never had a scope walk on me yet I use them on all my powerful springers

RWS should finish them to match their rifles (i.e.) 460 mag just makes the mount look like a that's all I had type thing or a used one. still looks beautiful though

If your having scope mount problems get one you wont be sorry

4 clamping screws, 2 stop pins. Heavy build

Make a recess at rear of mount to slide over the large slotted screw at end of scope rail on RWS 350

Decrease all screws before mounting.

Works like it should with no problems.

Nothing

My scope was maxed out on my nitro piston break barrel, and I was still hitting about 2 inches low at 20 yards. The RWS Lock Down fits perfectly on my rifle's 11mm dovetail and doesn't slide at all and it brought my scope back on target with plenty of adjustment to spare. These rings are well made and exactly what I needed.

Nothing. Well, free shipping would be nice.

If you're dealing with barrel droop, don't cut up business cards trying to shim up your scope. That may work or it may damage your scope and it could allow it to slip inside the rings. This set of scope rings will solve your problem without damaging your scope. Put them on with the arrow forward and stop pin to the rear.

This is an excellent scope mount. I purchased 2. One for a Diana 54 and the other for an RWS break barrel. The adjustability allowed me to zero the scopes in the midrange of their adjustability.

No changes.

Be patient. the adjustments took time to accomplish.

This truly locks down your scope.

This mount works excellent for mounting my 4-12 x 40 Mantis scope to my Diana 34 0.22 caliber. I applied blue locktite to all the fasteners. Once in position, the scope has not moved with over 700 rounds.

Nicely made, it looks like it would really work well. It just won't fit well on an older model 55 with the wider dovetail. I will put it to use on another gun someday.

To bad they don't offer it in a 13 mm width.

Don't try and put an 11mm clamp on a 13 mm dovetail if it has lock pins. I know this is a rare problem as the 13 mm dovetails have not been used for decades I believe.

A Rock solid mount for my RWS 350 Magnum rifle, easy to mount and securely locks the scope in place!

It would be nice if it had a quick release system from the rifle

Perfect fit and very durable.

Nothing.

This replaces a Center Point mount that moved no matter what. Mount is locked in place and has stayed solid. HW 34 now is accurate and shots are now repeatable.

Actually nothing for this rifle.

This also works on a RWS 52 22 caliber.

1 piece mount with RWS name on it.... That's about it, already removed it from my 34.

Double screw top strap for scope mount. Would hold my optics securely no matter what.

Not made for rifles with excessive recoil.

Allowed me to get longer distance without toping out elevation on scope. At 25 yards scope was almost maxed out, with this mount was able to adjust scope to almost halfway on elevation.

None

Product works as described

I mounted this on an old Beeman C1, works great. Use a little blue lock tight and its done.

Nothing

I have this mounted on my Diana 56 with a Nikon Pro-Staff 3-9 EFR Scope Easy to install on the Diana 56 and holds zero.

Nothing

All of the screws need to be cleaned and Loctited including the two stop screws.

Excellent mount, well made for an air gun with barrel droop.

This is NOT a mount for a Diana Model 48, as the built in compensation for droop will not allow you to zero the gun.

Quality mount.

Had to use Loctite on rail mounting screws as they worked loose in short order.

built well. not cheap looking

nothing

if you have barrel droop. this is an cheap fix. that works

It is quality and perfect piece

This is a well made mount.

Mount grips strong and seems to hold zero.

Anti-creep pin is to far forward, will not line up with hole on barrel. RWS needs to address this issue, as I see others have had the same problem.