RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation

Fits perfect and securely on my Diana 48

Nothing

Nothing

excellent product I've never had any problems with a RWS product

4 screws on each scope cap

the scope tape is thick enough to not dent your scope even when clamped all the way down

should be standard on all rws 460 magnums. even though Thay don't have barrel droop .

widen the scope clamping area & put 4 screws on each ring

works great on all heavy recoiling airguns

EVERYTHING. Lock down says it all.

Make one in 30mm they use to but i haven't found one anywhere. looks like the B/R shooters bought em all up

I use them on all my RWS /DIANA guns they really work on any hard recoiling rifles.

super strong mount even with only 4 scope screws never had a scope walk on me yet I use them on all my powerful springers

RWS should finish them to match their rifles (i.e.) 460 mag just makes the mount look like a that's all I had type thing or a used one. still looks beautiful though

If your having scope mount problems get one you wont be sorry

4 clamping screws, 2 stop pins. Heavy build

Make a recess at rear of mount to slide over the large slotted screw at end of scope rail on RWS 350

Decrease all screws before mounting.

Works like it should with no problems.

Nothing

My scope was maxed out on my nitro piston break barrel, and I was still hitting about 2 inches low at 20 yards. The RWS Lock Down fits perfectly on my rifle's 11mm dovetail and doesn't slide at all and it brought my scope back on target with plenty of adjustment to spare. These rings are well made and exactly what I needed.

Nothing. Well, free shipping would be nice.

If you're dealing with barrel droop, don't cut up business cards trying to shim up your scope. That may work or it may damage your scope and it could allow it to slip inside the rings. This set of scope rings will solve your problem without damaging your scope. Put them on with the arrow forward and stop pin to the rear.

This is an excellent scope mount. I purchased 2. One for a Diana 54 and the other for an RWS break barrel. The adjustability allowed me to zero the scopes in the midrange of their adjustability.

No changes.

Be patient. the adjustments took time to accomplish.

This truly locks down your scope.

This mount works excellent for mounting my 4-12 x 40 Mantis scope to my Diana 34 0.22 caliber. I applied blue locktite to all the fasteners. Once in position, the scope has not moved with over 700 rounds.