Page 2 - Umarex ReadyAir Portable Compressor Reviews

Able to fill my hammer

The ability to fill hammer at more ease

It could be used on 110 or 12 volts DC. It was compact.

it needs a 5 year warranty with free rebuild kits. It is no where close to the 20 hours service rebuild schedule they say it will run.

It is way over priced. I have only 2 hours on mine and longest time I ran it at one time was 8 minutes. Now it needs the rebuild kit on the piston because it will only fill the hose with the plug in it to 700 psi after 1 minute on time. I am not happy with this compressor at allay over priced for what you get. This is my experience on it for the last 6 months..

Very portable plug and play kind a thing works great straight to airguns just change my o rings and washers works like new again youve got pcp airgun you need this

Just wish i could charge a 6.8 liter tank lol

You can charge tanks little by little but then youll need lots of maintenance parts maybe if they are cheap ill get a dozen and ill be able to charge my 6.8 liter tank just love this to charge my pcpS

Great compressor if it worked like it is suppose to.

Make it work

When I got the unit the cooling fan will not shut off and none of the settings could be changed like bars to psi. Sent it back for another one. Pyramid Air did not tell me at the time it would be months before they would get more. I have tried to contact them all week including the press 2 button for a call back but never heard anything. I have purchased 7 rifles and various scopes and accessories from them and never had a problem until now. If they can,t send another one then send that one back and I will try to fix it even though it would void the warranty. I used Affirm to pay for it and have already started making the payments.

Portable, duel electrical hook-ups, light.

Price point should be $429.

Comes with one set of consumable replacement parts. Only 2-3 Minutes top-off from 2000 to 3000 psi. It is loud!

I think this has the potential to be a good compressor. I received one about a month ago directly from Umarex. After 20 minutes or so of use it got to the point it had a hard time pumping high pressure. Luckily it comes with spare parts, which are not hard to install and replacing the high pressure seal/s did resolve the problem. All said, it shouldn't fail after only 20 minutes or so of use, and now I'm having problems obtaining another spare high pressure seal and the o-rings needed for the maintenance Umarex states should be done every 20 hours of use.

Make spare parts more available. I came to Pyramydair.com in hopes of finding parts since I'm having trouble getting them directly from Umarex. They don't seem to be listed here or anywhere else either.

If you can find the maintenance kit (high pressure seal and necessary o-rings) keep them on hand.

I like that its digital.

The way products are inspected, so far had to tighten the cylinder bolts up i realized they were almost out around the fifth time i ran it i hope nothing internally comes loose and no damage was done to the piston or cylinder.

This compressor is very loud and its slow at filling i have purchased to replace my Hatsan Spark that is probably a year old but at times I'm still using the Spark its a little faster and not its in house friendly as far as the noise level.

Everything

Nothing

Free shipping to Puerto Rico when apply

Compact size, digital controller, battery hookup.

Noise level. (definitely not a deal breaker!)

Much better than a hand pump for sure! Cost of purchase!

If I could change anything, and keep it at the same price. That would have to be the sound level. My neighbors came looking to see what all the noise was about.

Try not to use it inside a duplex apartment! ...... the neighbors will be banging on your door for sure my friends. It was a good thing I have 3 PCP air rifles! .... I invited them to try them out.

Lightweight, compact unit that has easy to follow directions and easy to operate. It does exactly what they say and should last a long time if you follow their directions. It's simple to set to what fill limit you want and comes with default settings but can be changed if you want. I was surprised at the DC cables figured that they would be lightweight but these thing are monsters and of good quality. I like that you can walk away from it after filling your system and goes it into the cooling mode, although it only takes a few extra minutes so stay with it.

My only one gripe with it is the fill hose could be longer but understand that it wouldn't be as efficient with one, but I had to find something.

what others should know is if you are looking for a small compressor to fill your guns up this little thing is what you need, no it won't fill big tanks but if you are out hunting just buy yourself a tank and take it and get it filled by a shop and use it for that, topping off out in the field. I figure I will get a tank to carry out to the blind in the field if i expect to do a bunch of shooting but I can't see that happening. Just quit looking and order yourself one you won't be sorry.

Simple to run, fast and effective with minimal experience needed. Good owners manual.

Loud--Consider sound dampening material inside the housing.

Very simple to set up, use and maintain. Filled my 480cc FX Impact from 170 bar to 250 in about 5 minutes.

The female foster fitting is too large to fit in my Impact.

The fill whip and mounting screw use a slightly larger thread diameter than most 1/8 bspp fittings. When I tried to fill my Impact, I thought, "no big deal, I'll swap out the female foster fitting with a different one." Nope, nothing fits this whip. So I tried to swap out the whip....Nope nothing fits the male thread on the output. WTF!?! Ok, luckily I had a male to male foster, and a few other pieces and after making a Rube Goldberg of pieces I got to fill my gun finally.

Quick to come up to pressure

Automatic fan does not shut off after tempreture falls below threshold Gauge seems mounted upside down to working side

Probably would evaluate further

It pumps up to 4500 PSI and stops pumping at preset level.

It's big and heavy. It's loud. Almost lawnmower loud with pump and fan running. There is no on/off switch to turn the entire unit off. The power button turns the pump on/off but if you've previously used it, the fan will continue to run until you unplug it. The fan itself is hairdryer, on high, loud. Included charging hose is so short it's nearly useless. Controls/ergonomics impractical. The hose outlet, bleed screw and electrical jack is all on one side. If that side of the machine is facing you, the digital controls on top of the machine are upside down. The bleed screw, which expels moisture is right next to the 120v electrical jack.

I'm not impressed.