Page 5 - UTG 11mm (3/8") Dovetail to Reviews

I love these,small learning curve,VERY low profile.Will buy more.

A little heavier?

These clever adapters retain the lowest possible profile when attaching a scope or sight with weaver mounts to a dovetail pistol or rifle.

The description should document that these adapters *only* work if the surface above dovetail is absolutely flat.

Many European designed air pistols and rifles simply mill the dovetails into a piece of round steel stock. These adapters *will not* work if there is a curvature above the dovetail grooves.

They work.

As others have said, the bottom could be made to better fit a round receiver, and the clamp part could be a little sharper to better fit the dovetail grooves.

If you are going to use the stop pin, it must be adjusted before putting the adaptor in the scope rings.

These are probably best suited for a pcp or low to medium power spring/gas piston.
That being said, they do fit my HW90, and so far are holding up to the sighting-in process.

Easy to install, solid attachment.

This product is great" I used to use the 11mm to Weaver mount before I came across this item. But the scope depending on the style would ride too high, this one puts the scope lower on the gun allowing an easier sighting in but not for all scopes only the smallker ones.

Nothing this is a simple but logical invention that actually works without gimmicks.

Depend on your scope and when you don't want it too ride high this is it.

Quality construction, well put together. Works really well considering the price. Overall a good value.

Nothing, works well as is.

Remember this is an adapter and does not take the place of dedicated 11mm scope mounts. Works very well for an adapter.

Very nice & low profile doesn't raise your optics very much at all, I'm very pleased with the unit, well made.

Nothing really.

A nice adpt. for when you have to mt. something that you don't want to be any higher.

Low profile Easy installation Variability

Work great I have nothing but good luck with UTG products

Nothing

Definitely worth having a pair or two laying in the parts bin

There's nothing to not like

Nothing

Worked on everything I've used them for.

I've used these on other guns and really think they worked well. These were just put in this order as backups if needed.

Nothing. Work Really well !

Not a bad thing to have in your gun box.

convenience. they snapped right in.

nothing

works great.

I got a red dot sight for my 2240 for Christmas and I needed this to make it fit and it works great,

Easy to install, bailed me out of a difficult situation. Nice low profile, if that's what you need. Well made, well-designed, good value. Held firmly in the application for which I use it.

Nothing on this one, but would like to see a longer (continuous) one for one-piece mounts, which I might have chosen, since the dot sight has a one-piece mount. Having said that, this did work perfectly, though.

I bought a UTG 30mm Red/Green Dot Sight to fit a Hatsan AT PT2 QE, but the sight would not fit on the combination Weaver/dovetail rail on top of the gun, because the screws on the bottom of the sight didn't get past the dovetail, which protrudes above the Weaver, not did the distance between the screws correspond to the distance between the grooves on the Weaver rail. This adapter fit perfectly, and I did use some green threadlocker to keep it all from loosening. It does have screws to prevent sliding, which you might need on a powerful springer, but I didn't install them on this gun, which is a moderate power pcp.

keeps optics low as possible easy to use

nothing

this adapter is a real bargain

Most airguns seem to come with dovetails. This converts over to Weaver with no issues.

Nothing, nice product.

No reason to not at least try these. I did and am very happy. I've got maybe 4-5 sets. Quality item.

These products are great....you don't have to buy new scope ring for yourscope , you could use the rings they come with....that's a great product

These adapters are as low profile as can be. I put them onto a red dot sight which had integrated Weaver mounts, then slipped the unit onto the dovetail groves on the receiver. This is a low cost, practical solution for adapting Weaver style mounts a dovetail.

These adapters are good as they come and work great.

These are the perfect choice for attaching Weaver mounts to your air gun that has a dovetail. The adapters have a stop pin if it is needed. My application is on a CO2 air gun and I did not use this feature.

I really like the ability to turn any dovetail rifle into a weaver rail beast. This adapter system really opens up the options as far as optics go. This is my second set and that does speak for itself.

The stop pin could use a longer screw and needs to be thicker for those hard recoiling rifles.

I've used these adapters on everything from my Air Venturi Bronco to my TR77NPS. They work well but the stop pin system will take some damage on heavy springers like the Nitro Piston rifles. Even with the damaged stop pin the adapter does keep the scope in place shot after shot after having settled in place. I have over 1500 rounds in on my first set of UTG weaver-to-dovetail adapters and they are still going strong.

Good price and nicely made.

Bottom sleeves that grip the dovetail cutouts on my QB 78 air rifle was a little too thick and did not find it's way into the sharp narrower grooves . I should have researched it more before ordering, but will hang onto it for other future use.

Research your specifications and use first more carefully. I found the info on the site after re-reading the technical copy.