Create an online review and share your thoughts with other customers
5.0 5.0
5.0 5.0
By barry from USA on 2010-10-30 08:51:54
All metal and accurate within three inches when I installed it !
Things I would have changed:N O T H I N G
What others should know:This is the first laser sight i have ever used . Now I am a great fan of this little gem ! I installed it on a CROSMAN 1088 ( that was shooting low and right ) . Now at 28 feet i am shooting a eight shot group the size of a quarter ! This is a very easy way to make a pistol very accurate . WORTH EVERY PENNY .
1.0 1.0
4.0 4.0
By dwightja from USA on 2011-04-14 02:54:49
The laser mounted easily to the top of my Sig Sauer air pistol and the construction appears to be solid. The small aluminum construction is conducive to the use of this laser with pistols.
Things I would have changed:When I would fire the air pistol, the laser would stop working temporarily. I tried different batteries but it still worked inconsistently. Is there a problem with the batteries (3) moving around and losing the contact? Not sure.
What others should know:If this laser worked with consistency, it would be a great buy.
Sort by: | Date
| Helpfulness
| Rating
|
---|
Filer by: |
---|
5.0 5.0
5.0 5.0
This is the best Laser I ever used, strong on leeps on target.
Things I would have changed:Nothing
What others should know:if your looking for a good laser this is it.
5.0 5.0
5.0 5.0
All metal and accurate within three inches when I installed it !
Things I would have changed:N O T H I N G
What others should know:This is the first laser sight i have ever used . Now I am a great fan of this little gem ! I installed it on a CROSMAN 1088 ( that was shooting low and right ) . Now at 28 feet i am shooting a eight shot group the size of a quarter ! This is a very easy way to make a pistol very accurate . WORTH EVERY PENNY .
By barry from USA on 2011-01-25 |
3.0 3.0
4.0 4.0
Cheap. Easily mounts to gun and can be adjustable
Things I would have changed:electrical components so that when moving around, it doesn't mess with the flow of the current in the laser.
What others should know:I mounted this on my AEG and calibrated the laser. It works great when holding it still, but after pointing the gun down and back up a few times, the laser gets very dim. Also, the pressure sensor does not work all the time. I would be pressing it for 2 minutes, then it cuts off for a while.
5.0 5.0
5.0 5.0
small and compact. point and shoot. very accurate
Things I would have changed:nothing
What others should know:just take some time to zero it in. it took me half an hour, after that, its awesome!!!
5.0 5.0
5.0 5.0
its small hold aim very bright easy to adjust and its almost all metal the pressure switch is also really well made.
Things I would have changed:nothing!
What others should know:mine didn't come with Velcro for the pressure switch but oh well!
4.0 4.0
4.0 4.0
it comes in a cool tin case and has every thing you need to work it. it even came with 3 extra batteries. when i first put it on it seemed soooo cool. well i bought this because of the pressure switch, but when it came i didn't use it because when i tried to mount it on my hand gun it was too big. but the switch is so much better. the laser is bright and goes a long distance and its pretty accurate.
Things I would have changed:well i had a few problems with it at first, the switch wasn't working and the batteries wernt good. but when i fiddled around with it it all worked out. now i have it so its almost dot on.
What others should know:for the price its really good !!! i would recommend it.
4.0 4.0
5.0 5.0
This is my first laser so I don't know much about how they work or what. I mounted mine on my new H&K P30 and there was no problem mounting, just sticks out a little too far in the front but that is the gun. The light seems bright to me but max distance so far has been about 25 feet. Pretty good size for a pistol in my way of thinking.
Things I would have changed:Point of aim seems to move, at least the last time I used it. One of the adjustment screws seems max out position and not too snug so I'm thinking maybe it can move, was wondering about some blue Loctite but first I will rotate it in the holder and try that. .
What others should know:I like it as with my bi-focal eyes I need it, hope to get the shift in aim conquered, Anyone tried the Loctite?
5.0 5.0
5.0 5.0
The mount, provides all around support and protection to the sight. Very easy to zero the sight in. Two screws total, just like a rifle scope.
Things I would have changed:Nothing.
What others should know:Works fine on air guns, but also on larger caliber guns.
By Alyssa from USA on 2010-01-11 |
4.0 4.0
5.0 5.0
The laser is really bright. Windage and elevation adjustment is quite easy to do with supplied allen key.
Things I would have changed:It should come with an elastic grip band for the pressure switch. Without one, the pressure switch flops all over the place. I ended up removing the it and just using the on/off switch.
4.0 4.0
4.0 4.0
nice and bright little laser for the money.
Things I would have changed:make a beefier mount.
What others should know:I eventally took this off my rifle mounted on a leapers tri-rail because I got tired of re-zeoring it. Wasn't sure if the Leapers tri-rail was flexing/moving or just the laser. I took it off for now, perhaps I'll use it on a paintball marker or something. Very bright in lower light and night not so bright in day, but what more can you expect from a $25 laser.
4.0 4.0
4.0 4.0
Windage and elevation adjustments - many other laser sights don't have adjustments and are for big people-sized targets i guess. The easy way to adjust was to clamp the gun, shoot a hole in a target, then while the gun is still clamped aim the laser at the hole... then shoot another check shot. Attached mine to a Crosman 1088 bottom rail with no problems. Nicely made.
Things I would have changed:could break the sharp edges a bit, laser danger lable is covered up in use. Momentary button on rear limits how close to trigger guard you an mount it.
What others should know:states comes with 6 button cells but only uses 3 at a time, other 3 are spares, but one of mine was basically exlpoded and bad. But they are standard LR44s you can get fairly cheap at hobby stores, dollar stores.
5.0 5.0
5.0 5.0
Well designed and accurate once adjusted. I mounted on a Crosman 1088 & bench adjusted @ 25ft. Plinking at night is more fun than ever!
Things I would have changed:A multi-tool replacement for the 3 different hex bolt sizes needed.
4.0 4.0
4.0 4.0
Seems to have good battery life as I have not yet run the first set down. It is bright enough to see in some daylight but not all.
Things I would have changed:The adjusting screws need more tension, they feel like any vibration could make them turn. The remote pressure switch worked for ten minutes and was awkward to use. A better design would be a ring/loop that would stay on your finger when not being pressed.
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By dwightja
1.0 1.0
4.0 4.0
The laser mounted easily to the top of my Sig Sauer air pistol and the construction appears to be solid. The small aluminum construction is conducive to the use of this laser with pistols.
Things I would have changed:When I would fire the air pistol, the laser would stop working temporarily. I tried different batteries but it still worked inconsistently. Is there a problem with the batteries (3) moving around and losing the contact? Not sure.
What others should know:If this laser worked with consistency, it would be a great buy.