UTG Universal Bipod, Telescoping Legs Reviews

Tall standing

A well built, simple bipod. If you don't plan on going out in the field in battle and need swivel, etc. This bipod will work for you

The ability to lock the legs on an angle.

I installed an extended picatinny rail on my FX Sniper impact .30. I wanted both a fore grip with light and laser and a bipod, so the grip had to go on forward and the bipod rear of it. To do this the bipod needed to be installed backward not to interfere with the grip. In doing so ( which works well) but I am limited on the height available for the bipod, to high in some cases, if the legs could lock at an angle I could reduce the height when required.(laying on ground)

I have this mounted on a Hatsan AT44-10 Long QE Air Rifle .22. It works great. It folds forward to get out of the way.

Nothing

Fits on 2 gen Marauder

Non

Good quality

Price

Nothing

Fits good on .22 2 gen marauder

I like it verry much, ease of use, Install, Setup, removal. Spring loaded legs make use on uneven locations. All you do is turn to lock and unlock. I have mine on a NP2 Eagle .22 & .177

It would be nice to have a longer or third section, also a mount to use on breakbarrel.

To mount as mine, you need a thru bolt with a flat head inside the stock to clear the action.
Working on a U shaped bracket for further forward mounting.

Attached as advertised. Provides a stable platform for shooting. Raises and lowers smoothly. Very easy to adapt to my Side lever.

Nothing

Works very nicely if your air gun already has swivel mounts. If you are using a break barrel it could be difficult to modify the stock to accept swivels, unless you are experienced.

Adjustable and sturdy

Haven't used it enough to say. I like it so far.

Nothing now

I put this on my airforce talon, it works great!!!!! I wish that is telescoped out a little bit longer there have been applications where I have needed it to be about an inch longer

have it telescope out a little longer.

Great little unit if you are looking for something with good quality and not a lot of price.

Mounted this bipod on my Hatsan QE Long 22 cal. very sturdy and well made. I would highly recommend this bipod to anyone looking for a stable well made bipod , you can't go wrong.

I agree with other reviewers that it would be nice to offer other sizes as well , for some situations it is a little tall.

well made product, sturdy

wish they offered a version which had more extension instead of only a few inches, say 4-6 inch height adj.

Stable mounts right to the gun. no drilling

It will let the gunner swivel in either direction with a smooth, quiet motion. Not a high price range but still does the job efficiently.

The box never came with instructions. I just happen to be handy with many things so I didn't have a problem. If I wasn't handy or if I was new to guns, or didn't have service behind me I may have had to refer to the Internet, another gunner, OR call a representative.

Get a feel of someone's bipod first before ordering. Make sure of the size FIRST because everyone is built differently and everyone has different preferences because of different forearm length. What is good for someone that is 5'3" will NOT be good for someone that is 5'7" or taller.

Very Sturdy. Not too heavy. Strong attachment. Extendable legs. Cheap price for quality.

Give it a little range of motion..

This Bipod is built like a tank, but not overly heavy. They extend to become fairly tall. They hold my rifles rock-solid but at the price of having no tilt feature or range of motion. Forgot trying to rotate your rifle with this, the feet are very grippy on certain surfaces and you'll have to lift and reposition your rifle if your hunting and trying to track game. For a BenchRest bipod .. its excellent. I have one of these for every rifle, including some bull pups. Would I prefer an Atlas? Yes. But I don't have a fortune to spend on Atlas's for all my guns. You can outfit your entire collection with these for cheaper than ONE Atlas.

ease of mounting and use.

nothing

Excellent addition to my Hatsan AT-44"tact" 1022, Fit's the lower rail like a glove, Good length, and with the extendable legs fully extended, it gives you a great field of view, as well as being very sturdy when fully extended, some manufacturers, wobble&weavel w/ their legs fully extended, Not UTG!

Nothing, Well maybe one thing, get the design dept on it, to make it it a few Oz's lighter, Other than being slightly heavy, I wish it didn't off-set the guns balance when attached, having to put the unit on just before you start your Hunt at your chosen location, isn't as good as having the unit attached for the hunt's duration.

Any AT-44"tact"/BT-65 Elite owners out there should seriously consider this unit as a permanent fixture for your gun. Shooting with this unit attached, and fully extended makes shooting in "Prone" position as easy as,,,,,,,,,

I love the look and feel of this bipod. I bought it for my synthetic marauder. It looks so cool!!!! It attaches very easily to the front sling mount. Very light weight too.

I would make it adjustable from 7 to 11 inches instead of 9-11 inches

My first bipod broke while attached to my gun. I was using the bipod, fully extended, to rest my gun while i reloaded another magagzine. Then all of the sudden my gun falls over!! I look at what just happened and believe it or not one of the legs just snapped in half!!! I called pyramid air and they sent me a new one right away. I love thier customer service!!! I continue to use this bipod every day i love it
With the bipod attached, my gun does not fit in its case. I have to remove the bipod to put my gun away

This thing was a perfect fit and match for my needs once mounted on my brand new Marauder in .25. As I do a lot of video recording through my scope when shooting, I spend much time on benches etc and these legs are perfect. For sitting, 8" to 10" lift is great. It took me but a moment to read the directions and very simply install these things. A true no-brainer.

Nothing.

I wish I had bought a second pair for my Dragon Slayer. Now I have to wait. :)

Improves gun accuracy and I like the ability to attach a shoulder strap to it.

Nothing

You may have to unscrew the pin out of the gun stock slightly to get the screw in.

It works

When I mounted it on the gum, the only way to be very stable was to tight the bi-pod and it marked the wood stock... a little disappointed, but the bi-pod does the job.