Page 2 - UTG Universal Bipod, Telescoping Legs Reviews

Price

Make it more sturdy, better panning lock, shorter swivel stud adapter for Marauders, more adjustable height in legs and easier locking of leg height.

I have a Harris bipod on a 10/22 which is much better than this bipod for several reasons.

#1) Too much wiggling around in the legs with this bipod which makes it less accurate (big negative).

#2) Panning. In theory this is a good thing but comes with a wort and thats that it also makes your aim less accurate. Now your scope will move horizontally to track your target but again makes the bipod less stable therefore less accurate. This wouldn't be an issue if you could lock it from panning but even if you tighten the hex screw down all the way it will loosen. Only way to lock it in place is to put glue on the screw and rubber piece. Fail

#3) The swivel stud adapter or piece thats threaded will not work out of the box for Marauder owners. Took me at least 30 minutes to file down the threading to fit on my Marauder correctly as others have stated.

#4) Height adjustment is slim to none on this bipod. Can only increase height by around 2 inches max putting me in a bad situation at times.

#5) The leg height can be tough and awkward to adjust and lock. If your lying prone like I do a lot it can be a pain to adjust the height of the legs and lock them down where you want them.

All in all this bipod is OK but not great and I would not buy it again. I just purchased the tactical version which I think will be much better and should have got in the first place.

Nothing about these bipods are any good.

Everything. Make them similar to the Harris Bipods.

Where do I start.

it was cheap.works...o.k.

for the money...nothing

has a tendency to come loose at the swivel,locking screw is stripped out.

Good looking bipod, very sturdy and functions great once you get it on your gun.

Maybe change the small metal threaded piece needed for a sling stud mount because it didn't fit my gun.

When i tried putting it on my mrod, i couldn't line up the holes on the small metal threaded piece with the sling stud mount. I had to shave off a little bit of metal with sandpaper and eventually got it to fit. My cousin also got this bipod for his .22 lr with the same sling stud mount as my marauder, same problem occurred. Not sure if this happens with every mrod or a lot of other guns but if this happens to you, hopefully you can fix it like i did.

Simple to install, Simple to uninstall, pretty easy to unfold,

not sure

this is a pretty good bang for you're buck it came with my marauder so i guess its not too bad i rarely ever use it but its still pretty good

Very stable once installed.

For some reason it didn't fit on the front swivel stud of my marauder. I had to sand down part of the threaded pipe to fit the screw through the holes. Eventually got it and it works well.

This mount easily installed on my Benjamin Marauder pistol using a front swivel stud. So far, it has done it has performed well at the range and in the field.

The fit and finish of this Bi-pod is slightly lacking. The black finish is missing in certain spots and the area around the locking collars contains a few rough / sharp edges.

Great value for the money.

Works like it should. Pretty solid. Came with Marauder kit. Would not have bought one otherwise, but found I like it.

Bushings to make swivel and leg extension work smoother.

Its good, its cheap. I like it.

does it's job

for the price nothing

Solid, well built bi-pod. Metal construction with rubber feet. Folds up neatly & locks securely in the up & down positions.

Nice steady firing platform.

Very good quality, well built, made of metal (not plastic) as some are. Operates (folds and extends) easily and smoothly and locks in place. The non skid feet on the legs are great (especially when a rifle of some weight is attached), and it makes for a mich steadier sighting.

Nothing, this bipod either met or exceeded all mmy expectations.

A little silicone on the moving parts will make the operation even smoother. Be careful not to tighten the allen screws in the wheel too tightly or you may damage theparalax turret. By with confidence, Pyramid Air offers quality products and stands behind them 100%.

Really works great with my Marauder, easy to use, good construction.

nothing....

nothing just try it.

Very handy. Works awesome with my rws 48.

none

very simple mount, easy to assembly

works real good on my BEN M-ROD since it is a heavy gun

nothing

from reviews i have read i was expecting a less sturdy bipod. i was very happy to discover the bipod isvery sturdy and easily held my rifle steady and on target while shooting from a benchrest.

it would be nice if the bipod would pivot about 30 degrees to each side.as it is i can live with it by repositioning the bipod.

Everything works better in my opinion than other more expensive brand

Nothing

Rock solid I have 8 different bipods from them for different styles of shooting you won't regret any

The weight is perfect !!!!!!!!!fit right between my remington npss digital...

should come with the flat weaver for attachment

Mount does not mar wood stock rifles. Can be easily removed ato revert rifle back to sling carry.

n/a

Legs are somewhat adjustable, so I recommend that you buy the tallest and adjust down for various shooting situations, because you can't makle the short ones taller.

Quality especially for the price. Quick leg adjustment. Nice attachment for the sling and gives you a picatinny spot for other items or a different size bipod

Buy it, you will like it!!