Page 8 - Crosman 1322 Black Reviews

I purchased the 1377c recently, REFURBISHED, and i absolutely love it!This pistol will shoot completely thru a Rat or a Chipmunk at 30 ft.and get dime size groups off a bench also.I now intend to get the 1322 real soon.

Absolutely Nothing.

Please do not pump it more than 10 times and hope for more power,that will only damage your pistol.I personally like the Crosman Destroyer pellets,as they are cheap price and accurate.

Everything. Still looking for that 'just right' ammo, but thats half the fun of shooting this thing so far.

Nothing that I can think of.

Great bang for the buck out of this unit.

If you like to shoot, you can't spend $60 to better effect. It's as accurate as my Ruger .22 pistol. It's ergonomically very nice. Reasonably good sights (though I recommend getting Crosman's steel receiver upgrade so you can mount a red-dot or scope). It's fun!

As with all airguns, except the very expensive ones, the trigger, while not as horrid as the triggers on Crosman's rifles, needs work to make smooth and lighter. Fortunately, there are good tutorials online, and no cost is involved.

I get excellent accuracy at 25 ft. with just three pumps. In my basement, at 15 ft. I use just two pumps, even though the manual recommends no fewer than three. I'm using Crosman Premier and H&N waddcutters (these are a little more accurate.)

The gun looks good it's easy to pump and load pellets. I also like the amount of customization you can do to the gun.

Steel Breech should be installed by default, and I guess better quality control, my gun has a bent front site so I can't hit much of anything with this gun until I buy a steel breech and install a scope or dot.

I love it . I live in a surburban neighbor hood and I thinks it's kind of loud. But it's very accurate at 18yrds I'm getting groups the size of a dime!

Steel beech !

Shoots well with with Jsb pellets

The color. It is a nice break from the brown grips. I like the etching on the airtube, and I like that Crosman brought back the 22cal pump pistol.

I wish it were called the "Medalist" like the original. The grips are tired and need a lift. The color is good, but the pump arm is too small, and the ambi grip is too ugly. A Steel breech, standard, would have been nice.

This is a good solid design over all, except for the few cosmetics that I already covered.

I have been into Airguns for only two years now and I have brought many guns in this time, some a little more on the expensive side but I must say that even with all of these new guns on the market I have found the crosman guns the most likable guns out there. The crosman line is mostly inexpensive but the guns they make are rock solid and are my favorite Airguns, not to mention all of the accessories and modifications you can get. I am about to mod two pumpers and one 2240 and if you don't know about them do a little research you will be amazed.

At this price you can't ask for more. I would pay more if they added wood grips and forearm

Research these on the Internet the mods for these guns are endless

The gun is well balanced and relatively light. Shot in the black right out of the box at 10 meters.

A better fore grip and a better trigger. The fore grip has a tendency to pinch your hand while you are pumping the gun up

The sight is not at all good, you will probably want to replace it with a red dot or scope by buying the crosman adapters

Powerful and accurate once you learn how to hold it. Variable power so it is safe to shoot into a pellet trap in the basement.

Make the steel breech standard on both the 1322 and 1377. Smooth out the trigger.

These pistols are barrel heavy so you have to learn how to hold them to shoot them accurately. Mine has a rough trigger, it may need a few shots to break in. I have a 1377 which is the same gun in .177 cal. The 1377 had a smooth trigger right out of the box.

an old favorite, big brother to the 1377.

definately should be offered with a steel breach.

add a steel breach,longer barrel and the shoulder stock and you just took one of the best bang for the buck out of the box pistols and created an awesome "carbine" that will serve you well for years. out of the box you have a most dependable pistol, just like the 1377, that you will enjoy for a long time.

Has a good feel in the hand. Nice balance to the pistol.

A steel breach coming stock would be nice. A nicer set of open sights would be good too.

I have the rear notch as low as it will go, and my groups are still 2" high at 30'. Other than that, the groupings are nice.

Price! Accuracy. Simplicity of operation.

ok, things Crosman could change... The trigger is really the only thing that I am not real happy about; it is a bit on the heavy side, and trigger creep is very detectable. Granted, that would imply a much higher price. The rear sight notch is a wee narrow for me, but should be great for those with shorter arms. I would have purchased a model with Brown grip panels and forearm, but it is pretty cool this way, too. The ability to mount a pistol scope would be nice... just a random wish, here.

Accuracy with Crosman premier HP's averaged 1-inch 5-shot groups at 50 feet. This is almost identical results to my old 1377 I purchased TWENTY years ago; Crosman is still making excellent products!

What can I say everyone knows the quality of the Crosman 1322 I am just so happy they started making it again.

The plastic breech to the all steel one Crosman sells.

If you are looking for a nice hard hitting pistol then look no further go for the Crosman 1322.

Easy to pump Lightweight Easily modded good velocity pretty accurate out of the box cheap fun to shoot

for the price i wouldnt really push it, but there is a lot of plastic

This is a great gun for plinking, but even better for modding. A great gun for the money. You will like this gun if you buy it

Very accurate and powerful for a pistol. Can vary the power for indoor shooting. Duable and simple design with many aftermarket modifications available.

Trigger could be smoother, but for the price, it is very acceptable.

Variable power, feels solid and not cheap, adjustable sights, several accessories can be added to it if you wish(stock, scope,etc.), a lot of fun.

The pellets won't chamber into the bore unless pushed in to the bore and then closing the bolt. If you just drop the pellet into the chamber and then try to close the bolt, the pellet will shift to the side (crooked)and not chamber. This could be because of the pellets I am using. It is not a big deal however.

This airgun had been around for a long time in .177 caliber and I have always wanted one. Now that it is being made in .22 I finally got one, 35 years later!

A very ggod priced pistol in 0.22 cal, lightweight, very convenient and powerful for the size. Changable from pistol to carbine using the 1389 stock. Good precision with crosman pellets.

Add a metal breech with dove tail for sights,trigger more smooth.

Do not pass from 10 pumps, you should not get more power, instead you could damage the pump. Try some pellets in short distance, mine like crosmans. You should have a better accuracy using the 1389 stock.

I was very surprized by the accuracy of the 1322,I was never into these types of airguns(pheunmatic pumps) especially with a pistol. I bought this gun to play around in my backyard to shoot paper, after shooting a few pellets through it, I thinks it's just an awesome gun that's real fun to shoot,for the price of the 1322 you can't go wrong. i am very happy with this purchase. The power from this gun is decent for a stock pumper.They are real easy to work on if your into doing modifications. Very cool gun!

The main thing I would change would be the breech, I think it should come with an option of having a steel breech for those who prefer a scope oppose to the open sights as I do.

There are many upgrade parts available for this gun, I took the pistol grips off & added the 1389 stock & converted it into a very cool carbine for under $100.

extremly well made for price.strong power,with very little recoil. makes gun easier to be accurate with.

better sights. maybe fiber oiptics for older eyes

takes fair amount of strength to pump to max of 10, but well worth the effort in such a compact package

I picked up 2 of these as soon as they came out. I like that they are already in .22 caliber and we are not required to convert a .177 to have a .22 anymore. Black grip/handle also looks better when combined with 1399 stock.

I would like to see a model that is issued standard with the steel breech. As it is now, I had to do that on my own. The rear sight is mickey mouse, but if the breech is swapped to the steel version, a scope will be easier to mount. It also has a slot for a better rear sight too. The trigger can be smoothed out with a little work and Crosman should change the pump and piston design to be flat top to begin with.

Go to the Crosman site and order the steel breech. I already have mine for both the 1377 and 1322 and they are easy to instal. If out of stock, check back in a few days as they get them back in stock pretty quickly.