Page 2 - Air Venturi Dust Reviews

Good bb for plinking hard targets (safer) but I wouldn't advise using them in mag feed guns.perfect for revolvers using shells.

Nothing

Use recommended distance for hard targets and WEAR SAFETY GLASSES.

nothing, they did nothing but cause me to take my entire gun apart and clean them, constantly jammed

I like the concept, that's why I purchased them, but they didn't function well for me...

These literally ruined my guns. Don't use these in high-end air guns. Expect lots of jamming.

Nothing about the product. Waste of money. Does nothing as described.

Probably a thinner outer shell.

Do not buy this product in current configuration.

Nothing

Size of individual BB's differ greatly!!

Worst product ever. Dont ever use in a Co2 rifle. Very first mag of these garbage bbs one must have expanded in my barrel and is now jammed. I tried to push it out and ended up screwing my barrel. I shoot a DPMS SBR.

Works as advertised. Very useful for close range training since these BBs won't ricochet.

I would make them even more spherical without the band (MK III?) The BBs occasionally gets stuck in magazines mainly due to uneven magazine guide rails (e.g. two metal joining pieces in the slide channel).

Still use goggles. I suspect these BB's don't do well with moisture so keep them in a dry place.

No more ricochet

Packaging is very bad. Impossible to feed. Price is to high

Velocity is higher but accuracy so slightly off.

Things I like? Ha! Haha! Hahahahahahaha!!! Nothing. These are literally the worse possible ammo you could buy. Too bad I'm stuck with 2 unopened boxes and another box missing about 20.

I would go back in time to the day these were engineered and slap the engineer who made them. Then go back another day and beat him up just because.

Don't buy these unless you like to ruin barrels and seals.

Speed they really are faster

Nothing

These are interesting. They provide the "protection" that some BB shooters need.

This was a free gift when I bought the springfield m1 carbine. They are good, they work as advertised.

Diameter slightly smaller than other bbs.

Diameter slightly smaller than other bbs. Not a problem in most air guns. However it could be an issue with some air guns.

Fragmentation.

They are not the same size. I havent measured with mikes or calipers but none of my BB guns hold the bbs well enough to use. I have an umerex co2 revolver and the bbs fall out of the magazine and out of the barrel. I have a sig BB gun and the magazine wont hold the bbs. Neither will the magazine I have for our cross man sbr full auto.

Not exactly the same size as other 4.5 .177 caliber bbs. These are smaller.

really fun product works like a charm hardened targets it doesn't ricochet. they turn into dust

would not change anything about this product at all

great experience and great customer support

They are BBs!

The sprue on these things are obvious.

These BBs lodged in the barrel of my Black Ops co2 revolver. A ramrod had to be used to dislodge them. This happened 2 times out of 10. Some of the BBs did not fragment when striking a 1 inch thick pine board and merely imbedded. Fortunately, there were no ricochets. Not sure if I would purchase them again...

Not feeding in my single stack 1911 co2

?

Nothing. Great "concept". Very poor value, for something that did not deliver

Make sure these are tested for compatibility and post on website.

Don't break apart when fired from co2 powered, revolver or steel storm. AND, they don't feed, into the steel storm (a minus) that they jam up in semi or 6 round burst mode.

Disintegration upon impact of an object

There great to shoot without a mess of accumulated steel balls.

Just have fun.

Nothing. I'm not sure if I used the wrong ammo but, these bb's along with my ignorance ruined my Crossman R1 rifle. If these bb's were not meant for those types of guns, then it was my mistake. I used a mixture of excite bb and these in the same clip, which was my mistake. These bb's pulverized in the barrel and caused a jam that was almost impossible to get out. The barrel was probably damaged, and the gun was not functional anymore once I was able to clear it.

I cannot recommend it. I have no use for these and I bought a few of these boxes. I will try to return the unopened boxes. Hopefully, I'm still covered.

I wouldn't recommend these for anybody using a crossman r1 type of rifle.

The Frangible BBs seem to be well made, but I haven't had a chance to fire any yet. I will have to shoot some when I get a chance, and see for myself, so I can share my experience with all of you.

Nothing that I know of yet, but I will give an update as soon as I get a chance to fire some.

The little box of the Frangible BBs is surprisingly hefty, so a full reservoir of these BBs will add a bit of weight to your gun. I haven't weighed the box of BBs, but they are definitely a little hefty. The weight may come in handy at some point or another though.

None

Make a precision product

Unfortunately I bought 2 boxes of these and haven't been able to have 1 magazine load of them work. Nothing but jams every time I pull the trigger. I have tried them in sig 365 Walther cp99c glock 19x Beretta apx. Bb's are undersized and Not round. They measure between .157 to .167 depending on moving bb to different measure point. I measured 3 other brands of Bb's I own. Sig @. 172, daisy @.173, Crosman @.174 all of which measure the same at any position. Do not use these in any mag style gun. Might be OK in bolt action but haven't tried and won't bother. Called Air venturi to register a complaint but never had anyone answer the phone after 1/2hr on hold. Great idea, terrible product and quality control. I do not recommend the use of these in any gun as manufacturing tolerance indicate they will go wherever they want, not where your aiming. I am a millwright by trade that works down to the millionth of an inch. I have seen better quality control making ping pong balls.

Better than the first model.

Needs to be more crispy.

I did not know the humidity will influence it.!?