Benjamin Marauder Rifle Single-Shot Tray, .22 Caliber

A Must Have

Nothing

Good Buy

The single shot tray has a nice tight fit and an audible click when fully seated.

The price is a bit high. It should be included with the Mrod purchase.

I get slightly better groups since the skirts don't get crimped. It is a little difficult to load a pellet under a scope and properly seat it. Most people would like to have this part made of metal, I disagree. The plastic is fine and you would not want metal on metal when swapping from s.s. to magazine.

Easy to insert & remove from rifle.

Even though its plastic, item seems solid & well made. Tray is good for those Eunjins & Predators that are just too large for the magazine.

Ease of use installing. Hunt saver if your clip messes up on the Marauder.

The only thing is if you install this, you will eventually want to remove it.

Removing the ring can be confusing but it's easy with a small eyeglass screwdriver. Reach inside the ring with the screwdriver and gently pop it out. Be careful not to scratch the gun up. LOL

Very nice product. Good to have around if you want to use long pellets or just don't want to mess with the magazines for whatever reason.

Nothing.

I've had this for a few weeks now and have still not tried it out. I like my magazines!

Allows you to shoot those big Eun Jin's & Predators that don't work too well in the rotary clip.

The ring can be left in position around the bolt, even with the rotary clip. Just make sure to install the ring with the bevel facing the rear of the rifle.

it helps me single shot with the marauder and i use this for predator poly mags

price and construction the thing is a little piece of plastic the size of a quarter for 20 bucks the lease you could do is make it out of steel or some metal

use this for testing multiplier pellets instead of loading the magazine or you could just use this exclusively using the poly mags its all up to you

...a good replacement for the magazine. The fit is very tight and will not move.

The price is much too high for what you get...more than an extra magazine.

The O ring that is supposed to keep pellets from accidentially getting onto the trigger mechanism works as advertised...that is as long as it stays in place. I was doing some bench shooting and suddenly the bolt would not close all the way. I could not figure out the problem till I got home. The O ring had somehow been pulled back into the "black hole" by the bolt. Yes, I had it installed properly. Luckly, using a screwdriver, I was able to push it back in place through the bolt lock slot on the left side. If you install one of these, be sure to keep a check on the position of the O ring and make sure it stays put.

It does the job,wish they made one for the Sumatra 500.

The tray comes with the bolt ring and once you put it on the instructions say nothing about using it with the rotary mag---does one have to take it out?

The grade of plastic used to build this tray & ring compares with the toys Burger King gives with the kiddy menu. One wonders how Benjamin decides to put this low quality next to such an excellent rifle as the Marauder. The tray &ring are small and very expensive.

It allows me to shoot longer pellets such as the predators pr logan penetraters.

I was suprised this thing was made out of plastic!!! For the price, i expected it to be machined from a chunk of aluminum or steel. Ohh well.

Its plastic. Just so you know. Not a bad thing, i mean,.... It does its job, its not going to break or fall apart, but i hate plastic.