TenPoint ACUdraw PRO Cocking Device

The Wicked Ridge bow is awesome. The Acudraw Pro is junk. Bought over a month ago and still no love on fix. The cheap safety pawl is plastic and broke on 3rd time sighting in bow. Called Ten Point was told to take to authorized dealer to fix. I did so and they kept for a month then called to tell me it could not be fixed with new pawl. Now I must send back to Ten Point. Because the plate that holds the plastic part is warped. Had for over a month now and rut is almost over this year and If I am lucky will get a week or 2 in before season in Illinois ends on the 15th of January.

Absolute junk... Purchased an M-370 for the wife, an experienced archer who was having trouble drawing her old Hoyt.
Problem#1: Crank handle did not fit on the shaft of Accudraw Pro. Shaft was badly machined, and badly burred.
Problem #2: Crank handle itself was out of spec, did not fit the shaft tightly. Magnet fell off shaft,
Problem #3: Second time cocking the bow, the gears or the Accudraw Pro slipped, allowing the bow to dryfire.
Problem #4: Subsequent times the accudraw released while cocking, dryfiring the bow and finally breaking the retraction string. I contacted manufacturer wanting a replacement Accudraw unit sent to me. Manufacturers solution: Return the entire crossbow for repair... I attempted to return it to the wholesaler I purchased it from, but the manufacturer refused to accept the return.
My wifes archery hunt was ruined by faulty equipment, and she is stuck with a crossbow she (rightly) doesn't trust.

Little flip switch broke on my 8th time hunting with it. Cheap plastic, definitely not worth it.

Purchased the Accudraw system and had it installed on my new wickedridge 370. The system worked well for about a week before it started to breakdown. The reverse mechanism that allows the sled to release broke, making it impossible to activate the bow to shoot. The handle is also sloppy and creates problems when cranking. Disappointed to say the lease.

Never got to use would not ingage and I have to sent the whole cross bow back to get fixed

This came with my new M1 Turbo. Used it to sight in the crossbow, but eventually it started grinding and now the anti slip feature no longer exists. If I let go of the handle it will release the string forward.

Learned how to use this system in only a few minutes. The more you do it the easier it gets. The only issue I had with it was after about 10 shots the magnet came out of the handle that helps keep it attached to the crank. I just took it home and used some super glue to put it back in.

bought m1 pro package, draw pro came pre installed. the pawl (thin plastic lever for positioning) broke on 10th draw. be that as it was , it still never worked 100 percent for the 9 prior draws. i have an engineering background and the part is not shaped properly as well as, being made from a weak thin plastic(pretty sure not even ABS) that has no chance at any sort of lasting or functioning life . my strings already have fray indication . thicker ABS lever, with a larger radius on the tip, and some sort ofway to protect the string and my review would be 5 stars.

I have had my stealth nxt 2 years. Nice bow. The problem is the acra draw pro. I have replaced the cord three times. After maybe 35 or 40 shots. If ten point made the acra draw like the bow there would be no problem. I think they should redesign the pro. No a good set up for what you pay for the bow. Very disappointed.

Easy to install and so much easier to cock. Very quiet so chances are you can get that second shot off before that deer takes off.