Crosman 0423 Laser Sight, Weaver Mount

This works very well!

Make it easier to sight in. Took a lot of fiddling to get it spot on. Back and forth as I would end up turning it too far one way, then too far the other!

For the price, nice. Easy to install. Once sighted, works great! I would recommend it!!

Makes shooting targets so much easier.

nothing

Very reasonable can not say more than that!

Nothing.

Make it work more than one hour.

Get the Walther laser sight.

This laser fits on the accessory rail on a lot of pellet/bb guns. The adjustments are simple, and the dot is visible in the right light. I also like the push-button release and that it snaps into place like it does.

This thing should be tighter on the accessory rail. It fits rather loose on my Vigilante. I fixed this with some aluminum tape, but it took three or four layers to get it snug. The switch has no lock, and I put this into my air gun bag and the switch accidentally got bumped to the "on" position. Not realizing this my batteries got drained and now I have to buy new ones. I may come up with a kludge fix for this as well, but its a bit of a pain. The adjustments on the laser are rough, and I'm still not sure if they stay put all that well. There is a third screw on the rim which the manual doesn't mention. I'd like to know what that does. For an overall picture: This adds a very cool presence to your pistol/rifle, but in order to be of any practical use, it will require a bit of ingenuity and modification. I think for what it is the price point should be lower, around $15-20 and not above.

You can get this dialed in but don't try to adjust it until you get the mount to be snug. You can turn it on and try to wiggle it about to see how much free play there is. Get the mount tight with some kind of tape first (shim the upper inside of the mount rail), and then get to adjusting the laser. 1/16th of a turn will move it about 1" at 25 feet (I've estimated).

Also, on the Vigilante you can break the action open and look down the barrel to adjust the laser close to where it should be; this is a quick way to get it close.

Size, weight, ease of use. Laser is powerful enough to illuminate a target in daylight at 75 feet.

The mounting is too lose. The interior dimension between the rail slots is too wide. Tightening up this dimension would provide a more stable and repeatable mount to the under-barrel rail. (Small strips of painter's blue tape corrects this perfectly)

Great accessory for the price.

Works great on my Crosman C11 Tactical and Crosman Vigilante Revolver. So far no issues except for the on/off switch but note a big deal.

Fix the on/off switch so it stays off.

It works and it's low cost.

Feels like it can handle a little ware and tear. Strong ckear red dot on target.also easy to zero if u have the tool.even tho it does not fit my c11 because if the foam fits perfectly on the unarex X.B.G.

Slim the profile so it can still fit in a standard crosman holster.power switch needs work gets looser with every turn and had to pop it back in once sofar but that did tighten it up.over all good product but better for kids and girlfriends. Light duty

If you have a C11 take off the foam an it will fit.will not fit in holster without minor mods.

Not much money for a laser, but works just fine.

The on off switch, can easily be accidentally turned on. In bright sunlight, the laser dot can be very hard to see. That is to be expected.

Fit my Gamo PT-85 rail nice and snug.

The laser dot is bright enough. Attaching or detaching the sight to the Vigilante's lower rail is effective.

Sight alignment/zeroing should be clarified or re-engineered. Otherwise, there's no point in mounting and trying to use this sight.

I tried multiple times to zero this sight. Just when I thought it was tuned in, the adjustment was out in left field. If there is a sure way to effectively zero and use this product, that secret isn't being shared with prospective customers.

works well

Make it out of aluminum

horizontal/vertical adjust do not adjust perfectly X, Y plane.