H&N Slug HP, .217 Cal., 27 Grains, Hollowpoint, 200ct

Accurate and hits hard in my FX M3.

Larger tin

Try a little Ballistol on them.

Accuracy, hard hitting

The only thing I would change is all of these slugs are pasty white. Like they sat out in the rain for a month. They seemed to shoot ok but im not putting any more of those through my barrel. They are almost sticky

If you get these i would definitely find a way to clean all that stuff off of them

Heavy weight! Penetration! Accurate in my 28 ftlb springer. Too small for Benji Prowler in diameter. Benji is oversize. Rabbit mags FIT!!! Good performance . filled 5 pellet cans with dirt. Stacked in PA tin shipping box with packing. Penetrate 2 fully split the bottom of 3rd.. At 10 meters. With .22 Mach 12.5.

Only the Rabbit Mag is harder. Pig skulls at 20 meters should react similar to Rab Mag. Which penetrated thru 4 dirt tins. The hollow point is insignificant at 28 ftlbs. A deeper hole at the same diam. Should not affect aero. But sec. Density may suffer This would be soft-skin prey version.

A pcp round. An ultra mag. Springer can toss these.
I need the weight to anchor raccoon to feral goat size and pig in Texas. I have other effective loads but I like these in my gun.

Consistent, great penetration

Nothing

I run a stock Kral Puncher Breaker and modded 1322 with 14.5in barrel. In the Kral, these hold 3/8" 5 shot groups at 20 yards off sandbags. At the same range it penetrates 7 aluminum cans filled with water, the first two showing similar hydro-static shock that i get with Crow magnums in 1 can. Drop at range is considerably less than similar weight waisted pellets. The 1322 groups them as consistently as its best wad cutter, but the weight is a bit much to push at 10 pumps. I have experienced similar results with both the .217 27gr and .218 25gr. I will update when I get the .217 and .218 21gr and 30gr.

The solid feel of this lead pellets and how deep they can penetrate a 2 x 4 stud. They can also punch big HOLES in tin .cans

Nothing but I'd to SEE H&N make these in .177 caliber too

H&N makes awesome lead pellets for plinking or hunting

Very good,and very accurate